Search
42 articles for “concrete grades”
-
Effect of Multiwalled Carbon Nanotubes on Compressive Strength of Concrete
Abstract: The objective of the suggested study was to examine the possible application of multi-walled carbon nanotubes (MWCNTs) as nano reinforcement to improve concrete's compressive strength. Single-walled carbon tubes (SWCNTs) and multi-walled carbon tubes (MWCNTs) are two groups of cylindrical-shaped carbon allotropes known as carbon nanotubes (CNTs). Tests are carried out 7, 14, and 28 days after the MWCNTs are reinforced in M20 grade concrete at 0.02% and 0.025% (by weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 01–08 Read article
-
Effect of Steel Fibre on the Flexural Strength of Self- Compacting Concrete
Abstract: With the increase in demand in the construction industry Self-Compacting Concrete is becoming more popular due to its versatile nature of improved efficiency. But the SCC possesses some properties which makes it brittle under tensile forces. The behavior of SCC as a structural material can be improved with the addition of Steel Fibres in adequate amount. In fact, the fibre reinforcement mechanism can convert the brittle behavior of concrete into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 230–239 Read article
-
Performance Evaluation of Modified Concrete Incorporating Fly Ash, Silica Fume, Rice Husk Ash, and Calcium Nitrate
Abstract: The growing demand for sustainable and high-performance concrete has led to the incorporation of supplementary cementitious materials (SCMs) and chemical admixtures to enhance mechanical and durability properties. This study investigates the effect of 15% fly ash, 10% silica fume, 10% rice husk ash, and 3% calcium nitrate as a partial replacement for cement in M25 and M30 grade concrete. Experimental results demonstrate that the modified concrete exhibited an increase in …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 35–39 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Performance of Sisal Fiber Concrete Using Fly Ash and Silica Fume Enhancements
Abstract: The construction industry has advanced significantly in constructing innovative structures using diverse materials. Various waste materials such as fly ash, sawdust, and residues of natural fibers have been utilized in the construction industry. Addressing these concerns requires exploring low-cost, environmentally friendly, and sustainable materials. This paper aims to investigate mixing silica fume, fly ash, and sisal fiber into concrete to address waste disposal and global warming issues while creating stronger …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 63–74 Read article
-
Development and Performance Evaluation of Polymer-Modified Geopolymer Composites Incorporating GGBS
Abstract: This research investigates the development and performance of geopolymer-based composite materials formulated using Ground Granulated Blast Furnace Slag (GGBS) as a reactive mineral component within an aluminosilicate polymer matrix. The study aims to create an eco-efficient and structurally sound inorganic polymer composite comparable to M35-grade concrete, produced entirely under ambient curing conditions. A series of mixes with varying GGBS replacement ratios (0–100%) was prepared, maintaining a constant binder content of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1145–1165 Read article
-
Durability Assessment of Self Compacting, Self Curing Concrete Incorporating Crushed Rock Powder and Mineral Admixtures
Abstract: Curing plays a crucial role in achieving the desired strength, characteristics, and durability of concrete. Negligent curing practices can lead to adverse effects on hydration and mechanical properties of concrete. In recent times, self-curing concrete has gained significant attention due to its potential in reducing water loss through the use of self-curing agents. The Present Research study focus on investigation on durability characteristics of self-curing self-compacting concrete using crushed rock …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 25–35 Read article
-
Mechanical Properties of Rice Husk Ash Based Concrete Composites
Abstract: The production of rice is important all over the world. The husk that is made is usually used as a combustible material to prepare fields, giving energy through both direct combustion and gasification. The material rice husk ash may be quite fine. A common particle size for rice husk ash is 3 to 75 µm. This research demonstrates how the rice husk ash affects the mechanical properties of concrete composites. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 67–72 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
To Study Properties of Concrete by Using Manganese Ore Aggregate
Abstract: Aggregate is one of the major ingredients of the concrete and the maximum part of strength of the concrete is governed by the aggregate. And thus, partial or total replacement of it can change the physical as well as the chemical properties of the concrete. Nowadays researchers are quite interested in obtaining the more durable and more resisting concrete to the diverse climatic conditions. In this research, aggregate is proportionately …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 38–45 Read article
-
Influence of ZycoTherm Dosage on Polymer Modified Bitumen and Marshall Performance of Hydrated Lime Incorporated Warm Mix Bituminous Concrete
Abstract: This study examines the effect of ZycoTherm on PMB 76-10 binder characteristics and the performance of PMB-based Bituminous Concrete (BC) Grade-II prepared at reduced mixing temperatures, with and without hydrated lime. PMB 76-10 was modified with ZycoTherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder and evaluated using conventional and residue-based tests. Increasing ZycoTherm dosage decreased penetration, while softening point, flash point, and elastic recovery increased, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 256–267 Read article
-
Simplified Solution to Analysis Risk Assessment of Reinforcement type Soil Wall Considering Seismic Waves with Uniform Surcharge
Abstract: Due to failure of reinforced soil wall in various country the various risk factor are associated to these failure. In the present pseudo-static analysis some risk factor analysis have been done by considering the seismic waves with uniform surcharge and also consider surcharge’s inertial behavior at risk factor of horizontal and vertical coefficients of accelerations at kh = 0.24, 0.36 and kv = 0.12, 0.18 taking into account. The earlier …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 452–458 Read article
-
Geopolymer Concrete Composites and its Properties- A Clean and Sustainable Development
Abstract: Production of geopolymer composites, an inventive and environmentally friendly substitute for regular Portland cement concrete, involves the polymerization of several industrial waste materials, including fly ash, powdered granulated blast furnace slag, silica fume, and rice husk ash, using solutions that are very alkaline. Because this technique removes the requirement for calcination, which is a significant contributor of CO2 emissions during the manufacturing of OPC, GPC is more ecologically friendly. Alkaline …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 284–300 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Optimal Dosage of Pumice in Lightweight Aggregate based Concrete
Abstract: Lightweight concrete (LWC) is a pioneering solution in the construction sector, characterized by its unique composition and versatile applications. Engineered with lightweight aggregates and additives, LWC achieves a significant reduction in dry density compared to conventional concrete, making it 23% to 87% lighter, with densities ranging from 300 to 1,840 kg/m³. This reduced weight makes LWC ideal for projects requiring load minimization, such as high-rise buildings and prefabricated elements. A …
Published in International Journal of Minerals · Vol. 1, Issue 1, 2024 · pp. 23–32 Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article
-
A Review of Properties of Geopolymer Concrete
Abstract: The growing need for concrete around the world has led to both more concrete being made and more of it being used. Carbon dioxide is released into the atmosphere when regular Portland cement is made, which contributes to global warming (OPC). because concrete that is good for the environment needs new kinds of binders. Using different binders could cut down on the energy needed to make traditional concrete and the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 60–69 Read article
-
Properties of Concrete with Reinforcement Eggshell Powder As Cement
Abstract: Many people choose concrete because of its reputation for durability and dependability. Concrete is not only strong and consistent, but also energy efficient, design flexible, cheap, and generally ecofriendly. In addition to protecting natural ecosystems, stable civilizations often make plans for further industrialization and urbanization. As long as it is utilized in a compositionally flexible and ecologically friendly way, concrete may be used to create aesthetically stunning structures. Inadequate domestic …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 46–52 Read article
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
Review of Research on Pozzolanic Materials for Cement Blending and Concrete Applications
Abstract: The growing environmental concerns associated with cement production, particularly its high carbon footprint, have driven research into sustainable alternatives such as supplementary cementitious materials (SCMs) derived from agricultural and industrial waste. This study synthesizes findings from recent investigations into the pozzolanic potential of basil plant ash (BPA), rice husk ash (RHA), and stockpiled fly ash (FA), evaluating their processing methods, microstructural characteristics, and performance in concrete applications. BPA, being derived …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article