Search
46 articles for “Young’s modulus”
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Thermo-Mechanical Vibration Analysis of Simply Supported Laminated and Flat Plates Under Harmonic Loading
Abstract: This paper delves into a numerical exploration of the vibration characteristics and frequency response of two types of plates: a simply supported rectangular laminated plate and a simply supported flat plate. These plates are subjected to concentrated harmonic forces within a thermal environment. The determination of the critical buckling temperature guides the assessment of thermal load effects. Analytical formulations, incorporating first-order shear deformation theory (FSDT) to consider shear deformation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1519–1530 Read article
-
Fracture Analysis of Functionally Graded Material (FGM) Plates Using Extended Finite Element Method: A Review.
Abstract: Functionally Graded Materials (FGMs), have drawn a lot of interest in various engineering applications due to their superior mechanical properties and ability to withstand extreme conditions. Fracture analysis in FGMs focuses on understanding how cracks initiate and propagate within these complex materials. The stress distribution becomes irregular due to spatial property variations which produces different crack paths than what occurs in homogeneous materials. The examination of FGM plates under fracture …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 9–15 Read article
-
Latex Modified Concrete for Development of Sustainable Architecture
Abstract: To improve the performance of concrete, latex polymer and fly ash are mixed with concrete. This paper presents the effects of using additive material styrene-butadiene rubber (SBR) Latex and Admixture Fly Ash as a partial replacement to cement in mortar mixes. In this research comparison between with or without the replacement of fly ash and polymer is studied for Compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 39–49 Read article
-
Non-Homogeneous Effect on Vibration of Visco-Elastic Rectangular Plate Having Parabolically Varying Thickness in Both Directions
Abstract: At present the vibration theory has become significant in every sphere of applied sciences. In the advance time, the plates of variable thickness are widely used in civil, aeronautical, mechanical, electronics and marine structures like jet engines designing, space crafts, gas turbines, nuclear power projects etc. The effect of variation of non-homogeneity on vibration of visco-elastic rectangular plate with parabolically varying thickness in both directions is presented in this paper. …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 31–45 Read article
-
On the Optimisation of fundamental frequency to determine the Optimal Design of Bracing System for A Three Storey One Bay Two Dimensional Planar Structure
Abstract: Bracing systems are useful to improve the resistance of multi-storey buildings subjected to wind forces acting in lateral direction on the structure. The main focus of this paper is to find the optimal design of the bracing for a three storey one bay two dimensional planar structure. The eigen frequency of the structure is maximized to determine the relative density using a stress based criteria of each element for every …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 55–59 Read article
-
Free Vibration Analysis of Moderate Thickness in Orthotropic Laminated Composite Plate Using FE Method
Abstract: This study presents the free vibration analysis of a composite laminated plate with respect to various parameters. Effect of orientation on a plate, effect of boundary conditions, effect of thickness to width ratio, effect of changing the number of ply on a plate and the effect of young’s modulus ratio are presented in this study. Classical boundary conditions are used to perform all the studies. Free vibration analysis of plate …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 1–8 Read article
-
BisGMA/Thermoplastic Polymer Blends: A Study of Mechanical and Corrosive Properties
Abstract: AbstractThe objective of this work is to synthesize various blends of Bisphenol-A-glycidyldimethacrylate (BisGMA) resin with different proportions of thermoplastic polymers like poly-N-vinylpyrrolidone (PVP) and poly-ethyleneoxazoline (PEOZ) and to study their mechanical and corrosive properties. The experimental results showed that BisGMA/PVP and BisGMA/PEOZ blends displayed an improvement in the mechanical properties over unmodified BisGMA resin and the 50:50 blend system is the optimum blend composition in both BisGMA/PVP and BisGMA/PEOZ blends. …
Published in Journal of Polymer & Composites · Vol. 1, Issue 2, 2013 · pp. 1–14 Read article
-
Effect of Length and Tenor of the Introduction of Sansevieria cylindrica Fibers on the Mechanical Performance of Natural Fiber Composites
Abstract: The substitution of synthetic fillers, such as carbon black, with biobased ones in natural rubber (NR) is a trend of interest in view of increased sustainability and exploitation of agroforest waste in the materials sector. In this work, NR was filled with short fibers extracted from Sansevieria cylindrica (SC) leaves of various length (10, 20, 30, or 40 mm) and in different amounts (3, 6, or 10 g per 100 …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 94–101 Read article
-
A Critical Review of Hydraulic Fracture Propagation in Shale Gas Reservoirs
Abstract: The successful exploration and development of unconventional shale gas reservoirs was possible with advances in hydraulic fracturing and horizontal drilling. Hydraulic fracture treatments open these natural fractures and create a fracture network in gas shales. However, the fracture propagation is not fully understood as of now. A critical review of hydraulic fracture propagation in shale gas formations is presented in this paper. Effects of pertinent factors on hydraulic fracture propagation …
Published in Journal of Petroleum Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 1–17 Read article
-
Effect of Varying Particle Size and Content of Barley Husk on the Physical, Mechanical and Diffusional Properties of Poly Vinyl Alcohol/Barley Husk Composite Films
Abstract: Poly vinyl alcohol (PVA)/natural barley husk (NBH) composite films were prepared using solution casting method. The influence of content (5, 10, 15, 20 and 25 wt%) and particle size (89, 152, 251, 354 and 599 µm) of NBH on the physical, mechanical and diffusional properties of composite films were evaluated. Tensile strength and elongation of the composite films decreased by 55.73 and 59.48% and young’s modulus increased by 76.46% with …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 27–35 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Hygrothermal Analysis of Functionally Graded Material Plates
Abstract: This study introduces a novel higher-order shear deformation theory, tailored to accommodate various loading conditions experienced by laminated plates. The theory is specifically designed for the hygrothermal analysis of functionally graded plates. Three homogenization methods are used to calculate the Young's Modulus that is Power law distribution, The exponential distribution and The Mori-Tanaka scheme. Navier's solution scheme is used for flexural analysis of Functionally graded plates simply supported at all …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 44–62 Read article
-
Mechanical Testing Under Tensile-load
Abstract: Mechanical testing is a technique used to establish a material's mechanical qualities by examining its strength, toughness, hardness, and other characteristics. Specimens produced of various materials whose qualities need to be examined are used to verify this property. In which a static load is applied and a dynamic load is applied, and the test is completed. Understating loads in mechanical testing is the topic of this research article. Any manufacturing …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 1–10 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Innovative Polymer Nanocomposites: Bridging Sustainability and Advanced Material Performance
Abstract: This study examines the evolution of bio-based polymer nanocomposites using eco-friendly synthesis methods to improve mechanical, thermal, and barrier properties. It involves the combination of sustainable synthetic polymers with natural polymers in the presence of nanofillers in a green and compatible fashion to generate durable nanocomposites. Optimal alignment of nanofillers with the polymer matrices can be achieved using solvent casting, melt blending, and in-situ polymerization as fabrication methods. Consequently, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1671–1679 Read article