Search
111 articles for “XRD results.”
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Silver-Nanoparticle-Loaded Polyurethane Composites for Antibacterial Medical Devices
Abstract: Polyurethane (PU) polymer is widely used in biomedical application. In our study we have combined polyurethane with silver nanoparticles to develop a nanocomposite material for antibacterial medical applications. Such combination has antibacterial properties and control the toxicity too. In current research we have mixed the different sizes and types of silver nanoparticles into the polyurethane matrix. The result was their antibacterial activity, mechanical strength, and biocompatibility. The antibacterial performance of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 29–34 Read article
-
Evaluate The Engineering Properties of Low Load-Carrying Capacity of Expansive Soil by Using Magnesium Chloride and Dry Leaf Ash Powder
Abstract: The swell-shrink behavior of expansive soils poses numerous challenges with the substructure and distress in infrastructures such as buildings, pavements, breast walls, etc. The behavior of expanding soil has been carefully examined by geotechnical engineers, who have then put adequate management techniques into place. Present investigation intends to investigate potential benefits of dry leaf ash (DLA) powder and magnesium chloride (MgCl2) to enhance geological characteristics of soil, particularly addressing problems …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 33–45 Read article
-
Performance of Ni3Al and TiO2 Coatings on T91 Boiler Tube Steel in Simulated Boiler Environment at 900°C
Abstract: Boiler steel tube corrosion in coal fired boiler is main subject during design and operation of thermal power plant and it leads to both direct and indirect loss of cost and energy, including losses due to plant shut down time and inefficiency of operation. One of the feasible solutions to solve out this problem is providing surface coating on boiler steel tube, which on one hand protects the tube from …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 2, 2016 · pp. 27–34 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
EFFECT OF CALCINATION CONDITION AND COOLING METHOD ON REACTIVITY OF LIME SLUDGE
Abstract: In this Experimental Study, Raw Lime sludge from the Paper industry was characterized by XRD and TGA techniques. Lime Sludge was calcined for a temperature range of 550–7500C for 2 h and cooled by air cooling. The effect of calcination temperature on the reactivity of resultant Sludge was investigated by various indirect and direct methods of pozzolanic activity assessment such as the Strength Activity Test(SAI), Lime reactivity test, XRD, TGA, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 36–48 Read article
-
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by solution casting. The resulting films were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), vibrating-sample magnetometry (VSM), thermogravimetric analysis (TGA), and tensile testing. XRD showed the characteristic cubic spinel reflections …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Advancements in Solubility Enhancement Through Liquisolid Compact Technology: A Comprehensive Review
Abstract: The study examines Liquisolid Compact Technology as an innovative approach for improving the bioavailability and solubility of drugs that are poorly soluble in water. Liquisolid systems, comprising solid carriers and liquid drugs, offer advantages such as improved drug release and bioavailability, reduced manufacturing costs, and controlled drug delivery. The technique involves dissolving or suspending the drug in non-volatile solvents, adding carrier materials, super disintegrants, and coating materials, and then compressing …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 11, Issue 2, 2024 · pp. 25–34 Read article
-
Facile Synthesis and Characterization of Cd²⁺ Doped NiAl₂O₄ Nanoparticles for Advanced Polymer Composite Integration
Abstract: Ni1-xCdxAl2O4, where 0 ≤ x ≤ 0.5, was successfully synthesized using the chemical co-precipitation technique, a scalable and cost-effective route suitable for composite material applications. X-ray diffraction (XRD) analysis revealed a crystalline cubic spinel structure for the resulting nanoparticles, with determined crystallite sizes ranging from 36 to 12 nm for NiAl2O4 and Cd-doped NiAl2O4. The respective band gaps for the materials were found to be 3.51 and 4.18 eV. Infrared …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 59–72 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Synthesis and Characterization of Ta Doped Nanostructured PZT
Abstract: Lead Zirconate Titanate (PZT) powder of composition Pb(Zr0.65Ti0.35)O3 was modified by incorporation of Tantalum (Ta5+) in a wide composition range (5–25 at%) by chemical co-precipitation method using PbO, Zr2O3, TiO2 and Ta2O5. X-ray diffraction patterns of the samples showed the formation of a single phase and confirmed the formation of a rhombohedral phase of all the samples after sintering. SEM analysis showed well-developed, uniformly packed grains. Both the linear particle …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 41–48 Read article
-
Unraveling Mixed Ionic-Electronic Conduction in Lithium-Substituted Rubidium Tetra Titanates via Dielectric Spectroscopy and EPR Analysis
Abstract: Lithium-substituted Rubidium Tetra Titanates with varying concentrations of lithium carbonate (Li₂CO₃) — specifically 0.01, 0.05, and 0.1 molar percentages — were successfully synthesized using a conventional high-temperature solid-state reaction method. The resulting compounds follow the general chemical formula Rb₂₋ₓLiₓTi₄O₉. X-ray diffraction (XRD) analysis confirmed that lithium ions were successfully incorporated into the crystal lattice without disrupting the fundamental layered structure of the host material. The crystal system remained monoclinic across …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 2, 2025 · pp. 19–29 Read article
-
Enhancing Concrete Strength: Investigating the Impact of Glass Fines on Mechanical Properties
Abstract: The global emission of CO2 from cement industries poses a significant environmental challenge, being a primary contributor to environmental issues. Numerous researchers have explored alternative cementitious materials to formulate robust and long-lasting concrete. This study focuses on utilizing waste glass powder (GlP), derived from rejected soda-lime glass bottles collected from various sources, for experimental purposes. The laboratory experiments investigate the behavior of concrete incorporating glass as a partial substitute for …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 15–23 Read article
-
Nanostructured Catalysts for Sustainable CO2 Reduction: Advancing Green Chemistry and Polymer Composites
Abstract: This study provides a comprehensive analysis of advanced nanostructured catalysts designed to enhance the efficiency of artificial photosynthesis for sustainable fuel production. We systematically evaluated a range of nanomaterials—including metal oxides, plasmonic nanoparticles, and carbon-based composites—to determine their effectiveness in converting solar energy into storable chemical fuels. The catalysts were synthesized via sol-gel, hydrothermal, and green methods, and their properties were thoroughly characterized using XRD, SEM, TEM, UV-Vis spectroscopy, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 175–181 Read article
-
Thermo-Mechanical Behavior and Intelligent Optimization of Contact Temperature During Ultrasonic Vibration-Assisted Single-Pole Magnetic Abrasive Finishing of Zinc Alloy
Abstract: This study proposes a new integration of the experimental analysis, multi-physics finite element modelling (FEM) and machine learning (ML) optimisation of contact temperature (CT) in ultrasonic vibration-assisted single pole magnetic abrasive finishing (UV-SPMAF) of zinc alloy. The three gaps of the research are addressed: (i) The absence of a multi-physics FEM model that can couple electromagnetic, thermal and structural fields for UV-SPMAF of zinc; (ii) No quantified contribution of the …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 2, 2026 Read article
-
Design of a Geopolymer Based on Fly Ash and Metakaolin with a Solid, Liquid, and Powdered Alkaline Activator at High Temperatures
Abstract: In this work, the fresh and hardened properties of geopolymer concrete activated using solid, liquid, and powder alkaline activator systems, including fly ash and different amounts of metakaolin, are examined. Compressive and flexural strengths were assessed at 7 and 28 days in accordance with IS 516 (1959). Workability was evaluated using a slump test in accordance with IS 1199 (Part 2): 2018. At an ideal replacement level of 30%, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 712–726 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: The nanocomposites Ag NPs-zeolite involve zeolite loaded with silver nanoparticles and have been prepared by an easy one-pot hydrothermal autoclave method. Three samples of silver-bearing zeolite were prepared for 8 hours, 6 hours, and 4 hours, respectively, inside an autoclave at 100°C. A range of characterization procedures were used to examine the samples, such as x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-visible spectroscopy, and zeta potential. Results …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 80–90 Read article
-
Characterization and Antimicrobial Investigations of Isomeric Pr(III) Juglonates
Abstract: Hydroxy napthoquinone derivatives constitute an interesting group of ligands which is recognized as ‘Juglones’. Isomeric Lawsone-Juglone and Phthiocol-Plumbagin are the most important members of the Juglone series and are biologically active, having natural origin. They form isomeric pairs of ligands resulting into isomeric pairs of metal chelates. The isomerism is occurring due to formation of either five or six membered rings in the metal chelates. In the present work Prasodymium …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 545–552 Read article
-
Effect of Curing Time on Physico-mechanical Properties on Dental Composite
Abstract: This study aim to investigate the influence of curing time on physical and mechanical properties of a dental composite cured by using LED light with intensity of 1500 mW/cm2 in the range of 440-480 nm. We prepared the glass ionomer powder by fusion of various inorganic components at high temperature and studied the influence of silica/alumina ratio keeping other inorganic salts such as Calcium fluoride (CaF2), Sodium Fluoride (NaF), Calcium …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 36–47 Read article