Search
529 articles for “Thermally Developing”
-
Studies on Mechanical, Thermal, Physical Properties and Characterisation of PLA-EVA Blend with Microclay and Product Development
Abstract: PLA-EVA (70:30 wt. %) with microclay (1, 3, 5 wt. %) was also melt blended using Glycerol (1%) was used as compatibilizer in a twin screw compounding extruder. Then test specimens were prepared by an injection molding machine. Mechanical, thermal and physical properties were evaluated. As microclay content was increased, the tensile strength, elongation at break and tensile modulus were slightly decreased but higher than that of PLA-EVA (30 wt. …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 24–33 Read article
-
Photovoltaics and Thermal Solar Technologies: Innovations for Sustainable Heating, Cooling, and Energy Efficiency
Abstract: Developments in renewable energy technology, in particular photovoltaics (PV) and solar thermal systems, have been fueled by a rising demand for energy worldwide and the pressing need to slow down climate change. These technologies provide greener options for heating, cooling, and energy production by lowering dependency on fossil fuels and greenhouse gas emissions. This study examines developments in solar thermal and photovoltaic technologies, their uses in commercial, industrial, and residential …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 1, 2025 · pp. 30–37 Read article
-
Smart Biopolymer–PCM Composite Modules with Embedded Wireless Thermal Sensing for Autonomous Energy Storage Applications
Abstract: The development of multifunctional polymer composite systems for intelligent thermal energy storage has gained significant attention due to the increasing demand for sustainable and autonomous thermal management technologies. In the present study, a wireless-integrated biopolymer–phase change material (PCM) composite module embedded with thermal feedback sensors was successfully fabricated and experimentally investigated for advanced thermal energy storage applications. Polylactic acid (PLA) was employed as the biodegradable polymer matrix, while paraffin wax …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 193–205 Read article
-
Deep Learning-Based Thermal Prediction Models for Solid-State Electronic Devices
Abstract: The rapid advancement of solid-state electronic devices in high-performance computing, communication systems, automotive electronics, and renewable energy applications has significantly increased concerns related to thermal management and device reliability. Excessive heat generation in semiconductor devices adversely affects operational efficiency, switching performance, lifespan, and overall system stability. Traditional thermal prediction methods often require complex numerical computations and extensive simulation time, making them less suitable for real-time monitoring and adaptive control applications. …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
Transient analysis of Earth Air Heat Exchanger using CFD for Summer Season
Abstract: Energy accumulation in the soil may be used with Earth-Air Tunnel Heat Exchanger (EATHE), which has single tube or groups of tube buried in the ground (soil). In a country like India, there exist big gap in demand and supply of electricity and compels to look for alternative. A thermal model was developed to analyze the thermal energy accumulated in soil/ground for the purpose of room heating and cooling of …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 2, 2014 · pp. 7–16 Read article
-
Short Circuit Protection System for Electrical Vehicle (EV) Safety with GSM Module
Abstract: The safety of electric vehicles' (EVs') vital components against overheating has become a top priority for both manufacturers and users as EVs continue to grow in popularity worldwide. Important parts like batteries, power electronics, and charging systems run the risk of overheating, which can have a number of detrimental effects, including thermal runaway, which presents major safety risks like fires or explosions. Overheating can also lead to decreased efficiency, deteriorated …
Published in Journal of Power Electronics and Power Systems · Vol. 15, Issue 3, 2025 · pp. 18–22 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Performance Optimization of Photovoltaic-thermal (PVT) Systems: A Comprehensive Review of Design and Efficiency Enhancements
Abstract: The desire for renewable energy solutions and the rising demand for energy worldwide have driven important developments in hybrid photovoltaic-thermal systems. Photovoltaic-thermal systems provide the advantages of both thermal energy collection and electrical energy generation as they integrate photovoltaic and thermal collectors into a single module. However, a number of variables, including system architecture, material choice, cooling systems, and ambient circumstances, affect how well they function. The goal of this …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 2, 2024 · pp. 9–16 Read article
-
State Space Modeling and Robust Wind Power Generation System
Abstract: AbstractAs producing power from renewable energy is increasing, facing new problems emerging from this phenomenon is becoming a good challenge for power system engineers. One of these problems is the dynamic and transient stability of such systems when they are connected to a power network. In this paper, a variable speed cage machine wind generation system is considered as the case study. The concept of power system stabilizer, which has …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 2, 2017 · pp. 24–39 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article
-
Flexibility Analysis of Refinery Piping System
Abstract: Piping systems in downstream refineries and process plants experience a great thermal strain due to the difference between ambient and operating temperatures of process and utility fluid flowing through them. This thermal growth causes thermal stresses which leads to failure in piping components like flange leakage, deflection in piping, fractures at nozzle juncture and other fatal errors in piping system. Therefore, these piping structures must be flexible enough to support …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 53–59 Read article
-
Boiling Heat Transfer Enhancement on Macro-, Micro- and Nano-scales
Abstract: This paper presents a review of investigations on boiling heat transfer enhancement on macro-, micro- and nano-scale surfaces and fluids by the authors at the Moscow Power Engineering Institute (MPEI) plus known results of other researchers. These investigations were conducted with the purpose of increasing safety and efficiency of power generating systems. The investigations were focused on such problems as effective cooling at high heat flux (1 MW/m2 and more), …
Published in Journal of Nuclear Engineering & Technology · Vol. 2, Issue 2-3, 2012 · pp. 1–10 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Current status of reinforced thermal spray coatings to increase corrosion resistance of boiler tube steels
Abstract: AbstractThermal barrier coatings are one of the best techniques to protect the metal surface from erosion corrosion attach. Aluminium and nickel based alloys are extensively used as thermal barrier coated materials with various techniques such as HVOF, APS etc. The techniques for applying the coatings gain their importance in thermal spray which results to get a layer deposited without affecting the properties of substrate material. Thermal spray coatings have been …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 1–7 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Development and Performance Analysis of Pyramid Shaped Novel Solar Water Heater
Abstract: Solar water heating is an environmentally clean technology that utilizes solar energy as a renewable energy source for heating water. Several publications indicate that the interest in residential solar heating using flat-plate solar collectors remains high and current. The optimal tilt angle for solar collectors is estimated to be around 40°, resulting in energy savings, solar fraction, and collector efficiency of 1284 kWh, 29.6%, and 37.9%, respectively, for the entire …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 2, 2025 · pp. 1–6 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Effect of Ply Orientation on Thermal Erosion and Conductivity of Silica Phenolic Composites Under Oxy-Acetylene Flame
Abstract: The thermal and erosion performance of fiber-reinforced composites is highly sensitive to fiber architecture, matrix chemistry, and processing techniques, factors that have shaped development of advanced thermal protection systems (TPS) over past two decades. Silica phenolic (SP) composites, in particular, are widely employed in aerospace and defense applications due to their flame resistance, char stability, and ability to withstand severe thermal shock. However, optimizing thermal conductivity while improving erosion resistance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 273–283 Read article
-
Explainable Machine Learning for Process Parameter Optimization in Gradient 3D-Printed Polymer Composites
Abstract: The explainable machine learning-based structure may be employed to achieve a favorable process parameter of the graduate 3D-printed polymer composite structures to improve the mechanical and thermal properties without compromising the transparency of the decisions made during the fabrication process. Gradient composite specimens were made by systematically varied process parameters like nozzle temperature, raster orientation, deposition speed, gradient transition rate and fused filament fabrication. A predictive model of tensile strength …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 847–866 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article