Search
89 articles for “Taguchi Design of Experiments”
-
Optimization of Surface Roughness and Material Removal Rate in Turning of Al-6061 Using Taguchi Methodology, Fuzzy Logic, and Measurement System Analysis
Abstract: The optimization of machining parameters please a crucial role in improving product quality and productivity in manufacturing processes. This study focuses on the turning of aluminium 6061 alloy, aiming to optimize two key performance measures: Surface Roughness and Material Removal Rate. An integrated approach combining to Taguchi methodology, fuzzy logic and measurement system analysis (MSA) is proposed to achieve this objective. Taguchi design of experiments using and L9 orthogonal array …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 4, Issue 1, 2026 · pp. 13–19 Read article
-
Optimization of Machining Parameters for Titanium Alloy (Grade-5) Using CBN Tool Insert with Different Nose Radius Using Taguchi Technique
Abstract: In this research paper, focus is on the machinability study of titanium (grade-5) alloy using the CBN cutting tool inserts having nose radius of 0.4 mm and 0.8 mm. Taguchi method provides a simple, systematic and efficient methodology for optimization of the cutting parameters. Taguchi design of experiment approach has been used for planning the experiments and analysis of experimental data obtained. An orthogonal array L27 (313), the signal-to-noise (S/N) …
Published in Trends in Mechanical Engineering & Technology · Vol. 2, Issue 2, 2012 · pp. 17–31 Read article
-
Machining-Induced Surface Integrity Optimization of High-Carbon Alloy Steel for Enhanced Polymer–Metal Composite Interface Performance
Abstract: The functional performance and structural reliability of polymer–metal hybrid composites are strongly influenced by the surface integrity of metallic substrates used for interfacial bonding and load transfer. In this context, machining-induced surface characteristics play a critical role in determining adhesion behavior, dimensional stability, and mechanical compatibility within composite architectures. The present study investigates the hard turning performance of a newly developed high-carbon alloy steel intended for composite-integrated structural applications, with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1531–1546 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Analytical exploration of self-consolidating concrete (SCC) mix proportions via the Taguchi method
Abstract: To address the challenge of limited space within structural elements containing densely packed reinforcement, Self-Compacting Concrete (SCC) was developed. This study focuses on optimizing the experimentation process using Design of Experiments (DoE). Taguchi's standard L(3) orthogonal array (OA) was utilized, consisting of four factors with three levels each, resulting in nine trial mixes. The factors examined include water-powder ratio, cementitious material content, superplasticizer dosage, and steel fiber content. The aim …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 1, 2024 · pp. 1–16 Read article
-
Process Optimization of Spot Welding for Galvanized Automotive Steel Sheets
Abstract: Resistance Spot Welding (RSW) is a pillar of the modern automotive industry with the usage of lightweight and high-strength products at the highest point of demand. The optimum weld quality of galvanized steel sheets which is a material of choice because of its additional corrosion protective property is however not achieved easily. This study is a well-developed data-based solution to designing the RSW process in the most efficient way, providing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 32–42 Read article
-
Taguchi Design for Optimization of Reinforcement at Toe area of Carbon Fiber Foot Plate
Abstract: This paper uses the Taguchi method to design experiments to determine the effect of various factors, such as fiber orientation, fiber type, and number of layers, on the reinforcement at the toe area. The experiments are Taguchi method, which allows for identifying the optimal combination of factors that minimize the carried out using a combination of computer simulations and physical tests. The results are analyzed using the variability in the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 115–121 Read article
-
Comparative Study of Dry, Wet and MQL Lubricating Method on Aluminium 7075 Using Vertical Milling Machine
Abstract: In present time the technology of CNC vertical milling machine has been improved significantly to meet the advance requirements in various manufacturing fields, in which the major contribution is of biomedical field, automobile field and aerospace industries, so while machining to get better surface finish generally lubrication method is used, which also helps to maintain the temperature near interface of tool and workpiece. If the traditional cooling method is used …
Published in Journal of Mechatronics and Automation · Vol. 8, Issue 1, 2021 · pp. 12–19 Read article
-
Hybridization Method for Injection Moulding Process, Optimization with Melting Temperature Parameters
Abstract: Due to the production of plastic products with complex shapes, the plastic injection moulding manufacturing method has recently received a lot of attention. In order to improve manufacturing performance, the cycle time for the injection moulding process has been reduced, the defect known as dimensional warpage that results from temperature differences inside the mould has been reduced, and the mechanical tensile strength of the material has been increased so that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 337–345 Read article
-
Optimization of EDM Machining Characteristics of Reinforced Aluminium Metal Matrix Composites by Taguchi
Abstract: Aluminium alloys metal matrix composites (AMMC) play a vital role in various industries, such as aerospace and automobiles. This study investigates the machining characteristics of AL8079 - based composites reinforced with 15 wt. % TiB₂ and 5 wt. % MoS₂ using Electrical Discharge Machining (EDM). The machining process was optimized using the L9 orthogonal array (OA) Taguchi - based design of experiments, and input parameters were considered at three levels, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 939–951 Read article
-
Experimental Investigation Mechanical Behaviour of Composite Made by Carbon Fibre Mixed with Zro2 and Phenolic Resin
Abstract: Composites are one of the major research criteria in aerospace technologies to fulfil the present needs. Addition of materials to carbon fibers without increasing of weight of the parts Nano and micro fillers have its own criteria in improving mechanical properties. ZrO2 particles added to carbon fibers can improve the strength with a light add up in density. Present study focused on the mechanical behavior of zirconium oxide addition to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 562–573 Read article
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
A Review on effect of sandwich material on mechanical properties of resistance spot welding
Abstract: Resistance spot welding (RSW) is metal surface joining process. in which contacting metal are joining by the heat obtained from electric current. It is generally used for fabricating sheet metal assemblies such as automobile part, truck cabins, rail vehicles and home applications due to its advantages in welding efficiency. A study will be conducting to investigate the mechanical properties of sandwich material. In this work, an attempt is made to …
Published in Journal of Industrial Safety Engineering · Vol. 6, Issue 2, 2019 · pp. 32–35 Read article
-
Studies on Erosion Wear Behavior of Aluminum-3 Magnesium-10 Silicon Carbide Composite
Abstract: Aluminum-based metal matrix composites (MMCs) offer potential for advanced structural applications when high specific strength and modulus as well as good elevated temperature resistance along with light weight are important. In the present work, aluminum alloy-silicon carbide composite (Al-3Mg-10SiC) is developed using the stir-casting technique and is subjected to study the wear behavior. Solid particle erosion on Al-3Mg-10SiC was conducted. Implementation of design of experiments (through Taguchi and statistical techniques) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 39–50 Read article
-
Effect of Process Parameters on Material Removal Rate of Wire-Cut EDM of AISI EN 31 Tool Steel
Abstract: This paper is an attempt to find the effect of input process parameters on the material removal rate of WEDM of AISI EN 31 tool steel. The parameters taken for this study were pulse on time, pulse off time, peak current. The other process parameters like wire tension, servo voltage, wire feed rate, and spark gap voltage are kept constant. The experiment was designed using Taguchi’s L18 orthogonal array. The …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 2, 2017 · pp. 35–41 Read article
-
Evaluation of process paramters of various materials by turning operation using different methodology techniques-A review
Abstract: The use of engineering materials has increased to a great extent in industries. So it is required to find the optimum parameters in order to have easy and economical machining. Turning operation is most important in the machining process. Especially of hard materials it is difficult sometimes to do so. For better results, the selection of proper process parameters is very important. This paper presents, the effect of process parameters …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 36–43 Read article
-
Optimization of Machining Parameters of EN-27 Material Using Wire Electric Discharge Machining (WEDM)
Abstract: The optimization of Wire Electrical Discharge Machining (WEDM) parameters for EN-27 alloy steel, a high-strength material widely utilized in mechanical and structural applications, is the subject of this study's methodical analysis. Due to its hardness and poor machinability by conventional methods, WEDM is preferred for achieving precise dimensional accuracy and surface integrity. The primary objective of this work is to enhance machining performance by identifying optimal process parameters influencing Material …
Published in Journal of Production Research & Management · Vol. 16, Issue 1, 2026 · pp. 32–36 Read article
-
Comparative Study of Machining Parameters on Electrical Discharge Machining of Inconel 718 using Copper and Copper-Tungsten Electrode
Abstract: The present scenario in all the manufacturing industries is to make a priority list to cope up the challenges imposed by the superior materials like alloys, ceramics and composite materials which have difficulty in machining. In this study, comparison of experimental results which is found by optimization of machining parameters on material removal and tool wear rate along with two different electrodes material such as copper and copper tungsten for …
Published in Trends in Electrical Engineering · Vol. 8, Issue 2, 2018 · pp. 46–53 Read article
-
Optimization of Process Parameters for FDM Printed Tensile Test Specimens to Reduce Energy Consumption and CO2 Emission for Sustainable Manufacturing
Abstract: Three-Dimensional Printing (3D Printing) is one of the advanced manufacturing technologies which is being tremendously used in many fields because of its innovative applications. The concept of making a three-dimensional product by adding the material layer upon layer through Computer Aided Design (CAD) file data as input source is known as 3D Printing. Fused Deposition Modelling (FDM) is one of the leading technologies from all the available 3D Printing technologies, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 63–71 Read article
-
Influence of Process Parameters of TIG Welding Process on Mechanical Properties of SS304L Welded Joint: A Review
Abstract: The purpose of this study is to study the effects of various process parameters (welding current, filler materials and groove design) of tungsten inert gas welding (TIG) on aspect ratio, hardness and impact strength of SS304L welded joint. Aspect ratios are obtained by taking the ratio of bead width and bead penetration. This bead dimensions can be measured by digital vernier calipers. Weld joint quality depends on the bead dimensions. …
Published in Trends in Mechanical Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 11–17 Read article