Search
78 articles for “Surface Morphology”
-
Investigation on Dry Sliding Wear Behaviour of AlSi7Mg0.3/B4C/ZrO2 Hybrid Composites using Taguchi Method
Abstract: Hybrid Aluminium/Boron carbide/Zirconium oxide (AlSi7Mg0.3/B4C/ZrO2) composites were fabricated utilizing stir casting technique by varying boron carbide content (4wt.%, 8wt.% and 12wt.%) and utilizing a fixed amount (4wt.%) of zirconium oxide particles. Optical microscopy revealed that B4C and ZrO2 particulates were dispersed uniformly in AlSi7Mg0.3 matrix. Dry sliding wear experiments were carried out utilizing the pin-on-disc tribometer with various levels of applied loads, sliding speeds and weight percentage of boron carbide …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 166–177 Read article
-
Experimental Investigation on Mechanical Characterization of Electrodeposited Shot Peened Copper Coated and Un-Coated Mild Steel
Abstract: The fatigue strength of fabricated copper coating on mild steel specimens under repeated loading and the overall number of cycles to failure has been investigated. The specimens of copper coating on mild steel substrate are fabricated by using an electro deposition shot peening method. The hardness behaviour of fabricated specimens studied and the experimental work has been carried out by using Vickers Micro Hardness under the load of 20N force. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 279–288 Read article
-
Synthesis and characterization of mixed SnO2-ZnO Nano composites material to study the kinetics of catalytic reduction of Aromatic Nitro compounds
Abstract: A straightforward and cost-effective method was employed to synthesize zinc oxide (ZnO) nanostructures supported on tin oxide (SnO₂) for catalytic applications. This hybrid nanocomposite, formed by integrating ZnO with SnO₂, exhibited impressive catalytic activity in the reduction of various nitro compounds. The synergistic interaction between ZnO and SnO₂ significantly enhanced the surface area and active sites of the catalyst, thereby improving its overall efficiency. The resulting SnO₂-ZnO nanocomposite not only …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 3, 2025 · pp. 8–14 Read article
-
Utilization of Banana Peel Biopolymer as a Natural Coagulant for Wastewater Treatment: A Sustainable Approach to Bio-Composite Applications
Abstract: This study explores an eco-innovative approach to wastewater treatment by utilizing banana peel powder (BPP) as a sustainable, low-cost bio-coagulant. Although effective, conventional chemical coagulants like aluminum sulfate and synthetic polymers are often non-biodegradable, toxic, and economically burdensome, particularly in decentralized or low-resource settings. In contrast, BPP—an agro-waste material rich in bioactive functional groups such as hydroxyl, carboxyl, and phenolic compounds—provides a renewable and environmentally friendly alternative. To enhance its …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 106–115 Read article
-
Multifunctional and Photocatalytic Properties of DyFeO₃/Dy₃Fe₅O₁₂ Biphasic Nanoparticles
Abstract: Rare-earth orthoferrites constitute a class of compounds that exhibit remarkable magnetic, optical, and electronic properties across a wide temperature range. In the present study, a dysprosium-based orthoferrite containing dual phases of DyFeO₃ perovskite and Dy₃Fe₅O₁₂ garnet was successfully synthesized via the co-precipitation technique. X-ray diffraction (XRD) analysis was employed to investigate the structural configuration of the synthesized material. The diffraction pattern confirmed the formation of a biphasic composite comprising orthorhombic …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 41–54 Read article
-
Mechanical Performance and Material Properties of Nsm CFRP Polymer System
Abstract: Near-surface mounting systems are an advanced embedded technique application of CFRP composites in which the efficiency of the structure is mostly dominated by polymer matrix properties and interface stress transfer mechanisms. This review presents a holistic materials-based perspective on the experiment, analytical, and numerical studies conducted on the NSM-CFRP composite system, specifically on the behavior of the epoxy adhesive, interfacial behavior of composite–substrate system, and related structure–property relationships. The literature …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 311–319 Read article
-
Synthesis and Characterization of pH-Sensitive Poly (N-isopropylacrylamide-co-acrylic Acid) Hydrogels for Controlled Release of Doxorubicin
Abstract: pH-responsive polymeric hydrogels have attracted significant attention as intelligent biomaterials for site-specific and controlled drug delivery in cancer therapy due to their ability to respond to the acidic tumor microenvironment. In the present study, poly (N-isopropylacrylamide-co-acrylic acid) [P(NIPAM-co-AAc)] hydrogels were synthesized via free radical copolymerization and systematically characterized to evaluate their suitability for controlled delivery of doxorubicin, a widely used chemotherapeutic agent. The copolymer hydrogels were prepared using N-isopropylacrylamide and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 449–458 Read article
-
Development of Biodegradable Poly (Lactic-Co-Glycolic Acid) (PLGA) Nanoparticles for Sustained Release of Insulin
Abstract: This research outlines the creation of biodegradable composite nanoparticles made from poly (lactic-co-glycolic acid) (PLGA) designed for the sustained release of insulin. The emphasis is on the interactions between the polymer and the drug at the interface, along with the dynamics of the release matrix. The in vitro release kinetics, surface morphology, encapsulation efficiency, particle size, and polydispersity of insulin-loaded PLGA nanoparticles were analyzed following their production via a double …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1690–1699 Read article
-
Growth of Cu2O on TCO by SILAR method acts as an alternative buffer electrode layer towards the development of organic solar cell
Abstract: In many types of optoelectronic devices, layer of PEDOT: PSS is sandwiched between the indium-tin oxide (ITO) electrode and the active layer. Buffer PEDOT: PSS provides a well- defined work function which is higher than that of ITO (4.2eV), it smooths the ITO surface and so avoids shorts, and it also protects the active layer from ingress of indium or oxygen, leading to longer device lifetimes. The role of PEDOT: …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 18–25 Read article
-
A Comprehensive Survey of Polymer Detection Techniques and Computer-Based Analysis Methods for Advanced Material Characterization
Abstract: Polymers are widely used in aerospace, automotive, biomedical, packaging, electronics, and manufacturing industries because of their lightweight nature, durability, and versatility. Accurate polymer identification and characterization are essential for quality control, recycling, performance assessment, and the development of advanced materials. Characterization helps determine important properties such as chemical composition, molecular structure, thermal stability, mechanical strength, and surface morphology, which influence material performance and application suitability. Traditional polymer detection methods include …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 921–929 Read article
-
Dielectric Studies of 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 Nanoceramic Fabricated by Chemo-mechanical Process
Abstract: The present investigation is aimed toward investigate a straightforward, inexpensive, and environmentally friendly chemo-mechanical method for preparing high-dielectric materials, specifically 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 (BCT-CCTO), by combining metal nitrate combustion with solid TiO2 powder and titanium isopropoxide, Ti (OR)4. The composite was prepared by the mixing of individual materials of Ba0.8Ca0.2TiO3 and CaCu3Ti4O12 through the chemo-mechanical method. Initially, 99% pure Ba (NO3)3, Cu (NO3)2∙3H2O, TiO2 and glycine were taken in their stoichiometry ratios. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–21 Read article
-
ZnO Nanostructure Shape Effects in Photocatalysis of Methylene Blue
Abstract: Nowadays, dyes are used in the food industry, textile industry, paper industry, hair coloring, light-harvesting arrays, photoelectrochemical cells, etc. Most of the dyes are nonbiodegradable, toxic, carcinogenic, and consist of organic compounds. These dye wastages are discharged into water bodies and the environment causing serious hazards to the marine ecosystem as well as the humans extensively. To treat toxic dyes traditional methods such as adsorption, activated carbon, ultrafiltration, and reverse …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 722–727 Read article
-
Biopolymer-Based Nanoparticles: Advances in Fabrication, Characterization, and Biomedical Applications
Abstract: The emergence of biopolymer-based nanoparticles, particularly those composed of proteins and polysaccharides, has significantly transformed the landscape of biocompatible and biodegradable materials. These nanoparticles offer immense potential due to their ability to facilitate encapsulation and targeted delivery of bioactive compounds, enhancing therapeutic efficacy while minimizing side effects. This review explores the various fabrication techniques, including emulsification, desolvation, coacervation, and electrospray drying, emphasizing their advantages and limitations. The characterization of nanoparticles …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 3, Issue 1, 2025 · pp. 38–46 Read article
-
Conceptualization of An Intelligent Decision Framework for Control Factors and Weld Quality Prediction
Abstract: To improve the robot's welding quality, control welding precision, optimize welding parameters, realize continuous welding quality database optimization, and increase welding defect detection, a fuzzy neural network-based intelligent decision-making system must be built. This study demonstrates how fuzzy control theory and BP neural networks may be used to identify welding issues and enhance process variables. The experimental findings indicate that, with seam classification accuracy close to 90%, enhancing welding parameters …
Published in Journal of Polymer & Composites · Vol. 11, Issue 6, 2023 · pp. 10–19 Read article
-
Mechanisms of Crystal Growth: From Spiral Steps to Surface Adhesion
Abstract: Crystal growth is a complex interplay between thermodynamic stability and kinetic processes, influenced heavily by the conditions under which crystallization occurs—particularly the degree of supersaturation. This abstract outline three principal regimes of solution-grown crystal growth: defect-driven, two-dimensional, and adhesive growth. At low supersaturation, growth is facilitated at surface defects, such as screw dislocations, where energy barriers to attachment are minimized. This results in the formation of spiraling steps that propagate …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 46–31 Read article
-
Bio-Inspired Nanostructured Catalysts for CO2 Valorization: Green Chemistry Approaches in Polymer Nanocomposites for Sustainable Energy Solutions
Abstract: Artificial photosynthesis is a pioneering technology inspired by natural photosynthetic processes, offering a sustainable solution to address global energy crises and mitigate environmental impact. By harnessing solar energy, artificial photosynthesis aims to convert carbon dioxide (CO₂) and water into high-energy chemicals, such as methanol and hydrogen, while concurrently reducing harmful greenhouse gas emissions. This innovative process represents a transformative shift toward carbon-neutral or even carbon-negative energy production, helping reduce dependency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 38–46 Read article
-
Critical Review on Photocatalytic Polymer Nanocomposites for Indoor Air Purification in Hotels
Abstract: The indoor air quality has become a key measure of health, comfort, and customer satisfaction of a hospitality setting. The challenges that continually affect hotels especially because of volatile organic compounds (VOCs), particulate matter, and microbial pollutants that are present in cleaning agents, furnishing, and human activity. In this regard, the photocatalytic polymer nanocomposites are one of the sustainable and efficient means of purifying indoor air. These materials combine photocatalysts …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 527–541 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article