Search
61 articles for “Sample fabrication”
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
Fabrication and Flammability Assessment of Hybrid Composite Material Reinforced with Natural Fibers
Abstract: The utilization of natural fibers in composites has surged owing to their sustainable advantages. Natural fibers, categorized by their origin into plant, mineral, and animal fibers, have garnered significant attention. This study focuses on flax and wool fibers as representatives of natural fibers, paired with epoxy as the matrix material. The properties of flax and wool fibers were reviewed and found that wool has good fire retardancy property while flax …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 273–284 Read article
-
IoT-Enabled Flexible Polymer Sensors for On-Body Health Monitoring and Real-Time Data Transmission
Abstract: Wearable health monitoring systems have grown increasingly vital in shifting care beyond clinical settings, yet many existing technologies remain hamstrung by rigid substrates and unreliable data streaming, impeding continuous and comfortable physiological assessment. Despite advances in flexible materials, most current sensor platforms suffer from limited mechanical endurance, signal instability under dynamic conditions, or an inability to sustain real-time wireless transmission. This work addresses those deficiencies by introducing a fully integrated, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 188–200 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
ML-Based Predictive Modeling of Mechanical Properties in 3D-Printed Polymer Composites for IoT Applications
Abstract: This study aims to develop an interpretable and high-accuracy machine learning framework for predicting the mechanical properties of 3D-printed fiber-reinforced polymer composites, with a focus on structure–property correlations relevant to polymer processing and functional performance. Composite specimens based on PLA and ABS matrices were fabricated using FDM with varying weight fractions (5–20 wt%) of carbon and glass fibers. Standardized mechanical testing (ASTM D638, D256, D790) was performed to evaluate tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 61–78 Read article
-
Comparative study of the Antibacterial Properties of Modified Textile Materials with Different Metal Nanoparticles
Abstract: A number of metal particles have proven antibacterial properties. In this study, a comparative analysis was made of two types of metal particles: zinc oxide and titanium oxide nanoparticles respectively, which were deposited on cellulose material and were fixed by means of a cross-linked gelatin hydrogel. Three methods were applied under different reaction conditions for obtaining the biocomposite materials. The biomaterials were investigated by means of scanning electron microscopy, transmittance …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 92–101 Read article
-
Development of strontium ferrite/polyamide 12 and neodymium iron boron/polyamide 12 composites using additive manufacturing
Abstract: Polymer matrix composite materials with magnetic properties obtained by the addition of micron-size particles of neodymium iron boron (NdFeB) and strontium ferrite for fused filament fabrication (FFF) are becoming attractive because of their potential applications in the health and automotive industries. Additionally, the design flexibility and low cost of additive manufacturing processes encourage the scientific community to create the materials and understand the properties of the parts obtained with such …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 2, 2025 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article
-
Investigation on Tensile Properties of Redwood PLA Using FDM Process
Abstract: Fused Deposition Modeling (FDM) is an additive manufacturing technique employed to construct comprehensive 3-dimensional models using a variety of materials, catering to diverse applications. This study explores the fabrication of REDWOOD polylactic acid using (FDM) additive manufacturing processes. REDWOOD PLA, recognized for its biodegradability and renewable sourcing, holds promise as an eco-friendly material for 3D printing applications. The research investigates the tensile properties of REDWOOD polylactic acid (PLA) fabricated through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 668–673 Read article
-
Development and Evaluation of Sodium Hydroxide-Treated Jujube Pit Reinforced Epoxy Composites
Abstract: The automotive sector has experienced a tremendous transformation, propelled by the increasing demand for materials that provide a balance between mechanical performance, economic efficiency, and environmental sustainability. In accordance with worldwide sustainability goals, the trend has moved toward the utilization of lightweight, recyclable, and biodegradable materials in modern vehicle architecture. Natural composite materials, which are derived from renewable resources such as seeds, leaves, and tree barks, have gained considerable attention …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 494–501 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Parametric Optimization of Biocompatible Ti6AL4V Alloy on Selective Laser Melting for Enhanced Structural Support and Reduced Stress Shielding
Abstract: The Selective Laser Melting technique is widely employed in the production of complexly shaped end products for a range of industries, including biomedical, aerospace, automotive, and defence. SLM is a complicated manufacturing process since a lot of factors influence the characteristics of the items that are printed using it. The SLM printing of fully dense parts is becoming more and more popular for various high-end applications. Because of their biocompatibility …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 143–156 Read article
-
An AI-Driven IoT Framework for Autonomous Quality Assurance in Optical Lens Manufacturing
Abstract: The evolution of high-precision optics—ranging from smartphone micro-lenses to high-end astronomical glass—demands unprecedented accuracy in manufacturing. Traditional inspection methods, reliant on manual sampling or static automated optical inspection (AOI), often fail to bridge the gap between high-speed production and the detection of microscopic surface aberrations. This paper introduces an integrated architecture combining the Internet of Things (IoT) and Deep Learning-based decision-making systems to revolutionize lens quality control. By deploying an …
Published in International Journal of Optical Innovations & Research · Vol. 4, Issue 1, 2026 · pp. 36–41 Read article
-
Analyzing the Role of Fiber Composition in Drying Behavior: A Comparative and Predictive Approach
Abstract: This research presents a comprehensive analysis of the drying behavior and thermal response of three distinct fabric types: 100% Cotton, 100% Polyester, and a Polyester blend (65/35), under meticulously controlled environmental conditions. The Polyester blend (65/35) consists of 65% Polyester and 35% Cotton, combining characteristics of both fibers. The investigation focuses on understanding how fiber composition impacts drying time, moisture retention, and thermal characteristics. Experimental trials were conducted using standardized …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 1–11 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
How Microfluidics Are Used in Modern Science: Lab-on-A-Chip
Abstract: Microfluidics has changed modern research by making lab-on-a-chip (LOC) technologies that combine multiple lab functions into small, portable devices. These little platforms make it easier to correctly handle small amounts of fluid, which saves time, money, reagents, and automation. This article talks about microfluidics and how it helps LOC technology go forward in all areas of science. We look at important uses of biomedical diagnostics, drug development, environmental monitoring, and …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 35–48 Read article
-
Synthesis and Characterization of Sustainable, Low-Cost, Biomass-Derived Carbon Films from Hevea Brasiliensis (Rubber) Wood for Environmentally Friendly Gas Sensors with Enhanced Selectivity and Sensitivity to Polar Vapors and Hazardous Gases
Abstract: Hevea brasiliensis (rubber) wood sawdust was utilized to fabricate carbon gas sensors for detecting 1000 ppm of ethanol, methanol, acetone, carbon dioxide, and ammonia gases. The carbon particles were prepared by phosphoric acid impregnation followed by thermal activation and then fabricated into films on conductive and non-conductive substrates using the doctor blade method. X-ray diffraction (XRD) analysis revealed distinct graphitic features with peaks at the (002) and (100) planes, indicating …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 22–36 Read article