Search
444 articles for “High-Strength Applications”
-
Automotive Plastics and Polymer Composites: A Road Map for Future Mobility of Electric Vehicles
Abstract: The automotive industry is in the process of achieving a major shift toward green vehicles faster than ever with the heightened demand for energy efficient products, namely EVs. This evolution is closely linked with use of such composite materials like plastics and polymer composites. Lithium manganates and other similar materials provide extraordinary benefits such as lightweight, high density energy storage capability, and affordable to manufacture. Due to its advantages in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 378–392 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Optimizing Concrete Strength and Sustainability: Quarry Dust and Copper Slag Powder Additives
Abstract: This research investigates the potential of quarry dust and copper slag powder additives to enhance the strength and performance of concrete. Compressive strength tests were conducted on mortar cubes at 7 and 28 days to evaluate the effects of these additives. The results indicate significant improvements in compressive strength over time, with Mix A4 achieving a remarkable 43.42% increase in strength at 28 days. Other mixes also demonstrated substantial strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 1–6 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Evaluating Chassis Designs for Gesture-Driven Robots: A Study of Iron, Acrylic, and 3D Printed Solutions
Abstract: Gesture-driven robotic systems are becoming increasingly relevant in applications such as assistive technology, industrial automation, and interactive systems. The choice of chassis material plays a crucial role in determining the robot's mechanical strength, weight, and ease of fabrication. This study systematically evaluates three chassis materials—iron, acrylic, and 3D printed polymers—to determine their suitability for gesture-controlled robots. A standardized robotic configuration, including two rear motors, two front dummy axles, an L298N …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 686–692 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Effect of Solution Heat Treatment and Aging on the tensile Properties of Ti-6Al-4V Alloy Component Manufactured by Wire Arc Additive Manufacturing
Abstract: Wire Arc Additive Manufacturing (WAAM) is a cost-effective technique for fabricating components from the Ti-6Al-4V alloy, known for its high strength and utility in demanding applications. To maximize its strength, the alloy undergoes Solution Treating and Aging heat treatment, comprising three key steps: (i) Solution Treating: The alloy is heated to 950°C (just below the β transus) and held for 1 hour, increasing the β phase proportion. This step sets …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 2, 2025 · pp. 1–6 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Performance Evaluation of High-Performance Fiber Reinforced Concrete Incorporating Fly Ash, Coir Husk Ash, and Hybrid Fibers
Abstract: High-Performance Fiber-Reinforced Concrete (HPFRC) is an advanced composite material designed to improve the mechanical properties and durability of conventional concrete. This study investigates the effects of fly ash (FA), coir pith ash (CPA), and various fiber reinforcements (polypropylene, coir, and kenaf) on the compressive strength of HPFRC. The research evaluates the influence of natural admixtures, single fiber additions, and hybrid fiber combinations to optimize mix proportions for enhanced structural performance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 10–15 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Comparative Analysis of 3D Printed Nylon and PETG Specimens for Mechanical Properties.
Abstract: Fused deposition modeling (FDM) is one of the most used additive manufacturing techniques for polymer components. The polymer materials generally used in FDM process are polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PETG), Nylon, etc. The mechanical properties of parts fabricated by FDM depend on material and process parameters. Several researchers have tried to investigate the influence of process parameters on mechanical properties for some of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 7–14 Read article
-
Innovations and Comparative Analyses in Foam Concrete: A Review of Emerging Techniques and Materials
Abstract: Foam concrete, recognized for its lightweight and eco-friendly properties, is gaining prominence as a sustainable construction material. However, challenges such as low mechanical strength, performance variability, and limited environmental resistance have prompted significant innovations in recent years. This study synthesizes findings from three key studies focused on enhancing foam concrete’s performance through nanomaterials, natural fibers, and alternative lightweight aggregates. The incorporation of nano-silica and nano-calcium carbonate into coal gangue foam …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 3, 2025 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Critical Review on Basalt Fibre as Reinforcement in Different Applications
Abstract: Basalt fiber (BF), derived from volcanic rocks, has emerged as an attractive reinforcement material due to its remarkable properties, including high strength, stiffness, thermal stability, and eco-friendliness. This review critically examines the applications of BF as reinforcement in various fields, such as civil engineering, aerospace, automotive, and biomedical sectors. The performance of BF-reinforced composites in terms of mechanical, thermal, electrical, and biological properties is evaluated. The challenges and opportunities associated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 670–685 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
Analysis of Bamboo Strength for Structural Material
Abstract: Bamboo is a environmentally accessible available organic plant and among the plants with the quickest growth on earth. It grows up to 60 cm (approx.) a day and it can reach it`s maturity in about four years. It is present in large number of quantities in India. India is of the large producer of bamboo and in every part of India bamboo is easily available. Bamboo has very wide range …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 66–71 Read article
-
Transforming Waste into Value: The Role of Discarded Waste in Sustainable Paver Block Production
Abstract: Concrete is the primary material used in building construction, but significant waste is generated during the demolition of structures. The increasing activities in the construction sector and manufacturing industries have led to a rise in waste production. This review paper explores the potential of utilizing Construction and Demolition (C&D) waste in the production of sustainable paver blocks, addressing the pressing environmental challenge of the estimated 12-14 million tonnes of construction …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 1–15 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article