Search
213 articles for “High thermal Stability”
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Thermal Conductivity and Energy Storage Performance of Paraffin Wax-Based Composites Reinforced with Amine Functionalized Graphene as a Nanofiller
Abstract: In this study, amine-functionalized graphene (AFG) was employed as a nanofiller/nanomaterial to enhance the thermal and structural properties of a paraffin wax (PW)-based polymeric composite, formulated as a phase change material (PCM). The PW/AFG composite was synthesized with varying nanofiller volume fractions (0.20%, 0.40%, 0.80%, and 1.60%), and its thermal conductivity, stability, and energy storage performance were systematically analyzed. The incorporation of AFG into the polymer matrix significantly improved the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–374 Read article
-
Wear Behavior and Mechanical Characterization of Pure Aluminum Reinforced with RHA by Using Powder Metallurgy Method
Abstract: In recent years, composites made from aluminum and its alloys have gained significant attention due to their optimal blend of low weight, high strength, impressive toughness, enhanced thermal stability, straightforward casting processes, superior corrosion resistance, and availability compared to unreinforced aluminum and its alloys. These aluminum-based composites are widely utilized in producing components for industries such as automotive, aerospace, marine, and nuclear. Rice husk ash (RHA) is a fine, powdery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 495–502 Read article
-
Photonic-Assisted Spintronic Solid-State Switching Model for High-Speed Memory Devices
Abstract: The rapid advancement of high-speed computing and data-centric applications has intensified the demand for energy-efficient and ultra-fast memory technologies. This paper proposes a Photonic-Assisted Spintronic Solid-State Switching Model for next-generation high-speed memory devices. The proposed framework integrates photonic excitation mechanisms with spintronic switching dynamics to enhance data transfer speed, minimize switching delay, and reduce power dissipation in solid-state memory architectures. By combining optical pulse-assisted spin polarization with magnetic tunnel junction-based …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
Self-Healing Polymeric Composites Reinforced with Green Synthesized Nanoparticles
Abstract: The development of sustainable self-healing polymeric materials is critical for enhancing durability and service life in advanced engineering applications. In this study, zinc oxide (ZnO), magnesium oxide (MgO), and ferric oxide (Fe₂O₃) nanoparticles were green-synthesized using Allium cepa extract and incorporated into epoxy-based polymeric composites to improve mechanical, thermal, and self-healing properties. This bio-based synthesis is eco-friendly and safe alternative to harsh chemical techniques, utilizing natural antioxidants to stabilize the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 305–314 Read article
-
Nanofluids: Advanced Synthesis Methods, Innovative Applications, and Future Directions
Abstract: Nanofluids, a novel mixture of nanoparticles and base fluids, is an innovative blend that has appeared as a transformative advancement in heat transfer and thermal management technologies. This study is going to discuss advanced synthesis methods, properties, and extensive applications of nanofluids in various fields, such as biomedical engineering, electronics cooling, solar energy, and machining. Optimization techniques such as nanoparticle selection, concentration control, and computational fluid dynamics modelling are also …
Published in Journal of Nuclear Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 1–11 Read article
-
Effect of Heat Exposure on Structural Integrity of Geopolymer Concrete Composites
Abstract: The research evaluates the thermal degradation effects of high temperatures on Geo Polymer Concrete Composite (GPCC) by examining alccofine concrete, concrete made with alccofine and porcelain waste aggregates. Knowing how GPCC behaves under high temperatures proves essential for protecting buildings during fires as well as industrial applications. Each mix design received composite concrete samples that underwent increased heating conditions from 100°C to 700°C at 200°C intervals. Post-heating, various parameters were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 318–328 Read article
-
Effect of Ply Orientation on Thermal Erosion and Conductivity of Silica Phenolic Composites Under Oxy-Acetylene Flame
Abstract: The thermal and erosion performance of fiber-reinforced composites is highly sensitive to fiber architecture, matrix chemistry, and processing techniques, factors that have shaped development of advanced thermal protection systems (TPS) over past two decades. Silica phenolic (SP) composites, in particular, are widely employed in aerospace and defense applications due to their flame resistance, char stability, and ability to withstand severe thermal shock. However, optimizing thermal conductivity while improving erosion resistance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 273–283 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Advanced Solid-State Battery Technologies for Sustainable Energy Storage
Abstract: The increasing global demand for sustainable and high-performance energy storage systems has accelerated research in advanced battery technologies. Conventional lithium-ion batteries, while widely used in portable electronics, electric vehicles, and grid storage systems, face limitations such as safety risks, limited energy density, slow charging rates, and degradation over repeated cycles. To overcome these challenges, advanced solid-state battery technologies have emerged as a promising solution for next-generation energy storage applications. This …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
Advanced Polymer Composites for Energy Storage: Accelerating the Electric Vehicle Revolution
Abstract: The automotive sectors are going through dynamic changes as electric vehicles EVs are being adopted as sustainable solutions to the ever-emerging transport and environmental issues. The underpinning changes that are attributed to the transition process are the advancement in the energy storage systems which are central in improving the viability of the EVs. Of the emergent materials, polymer matrix composites have attracted much interest because of their features as lightweight, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 540–549 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Polymer-Nanowire Hybrid Composites Based on PEDOT: PSS and AgNWs for High-Performance Conductive Films in Flexible Devices
Abstract: The growing demand for flexible photovoltaic and wearable optoelectronic devices has intensified research into polymer-based conductive composites that provide transparency, flexibility, and electrical efficiency. In this work, we report the fabrication and characterization of a hybrid polymer nanocomposite electrode comprising silver nanowires (AgNWs) embedded within a PEDOT:PSS matrix, deposited on flexible polyethylene terephthalate (PET) substrates. The PEDOT:PSS polymer phase, modified with 5 vol% dimethyl sulfoxide (DMSO) and 0.1 vol% Zonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 236–250 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
Recent Innovations in Semiconductor Materials for Smart Electronic Devices
Abstract: Recent advancements in semiconductor materials have significantly transformed the design, performance, and functionality of smart electronic devices such as smartphones, wearable systems, IoT devices, autonomous systems, and biomedical electronics. With the continuous demand for higher processing speed, lower power consumption, improved thermal stability, and extreme miniaturization, traditional silicon-based semiconductor technology is facing major limitations. As device dimensions shrink to the nanometer scale, challenges such as leakage current, heat dissipation, and …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 Read article