Search
127 articles for “Fourier transform infrared (FTIR)”
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Tailoring The Electrochemical Interface of Graphene–Gd₂O₃ Nanocomposites for Advanced Energy Storage
Abstract: Graphene–Gd₂O₃ nanocomposites were synthesized by incorporating varying concentrations of reduced graphene oxide (rGO) into Gd₂O₃ using a straightforward room-temperature solution method. The composites were analyzed using various distinct characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Electrochemical measurements, particularly cyclic voltammetry (CV), demonstrated that the incorporation of graphene significantly enhanced the electrochemical performance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 369–388 Read article
-
Extraction and Characterization of Pectin from Malabar Tamarind, and Indian Wild Lime
Abstract: Pectin is a versatile heteropolysaccharide that is widely used in the food, pharmaceutical, and biomedical industries because of its gelling, stabilizing, and emulsifying properties. This review discusses the extraction of pectin from agro-waste peels of Malabar tamarind (Garcinia cambogia) and Indian wild lime (Citrus indica) using conventional acid hydrolysis under optimized conditions: pH 1.5–2.0, 85–90°C, and 90 minutes. The process resulted in 22.5% and 27.8% pectin yields, respectively, verified through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 472–478 Read article
-
Studies on the Self-Assembly of Steroids and DNA Mediated by Naphthalene-Based Amphiphilic Block Copolymer
Abstract: Amphiphilic block copolymers have attracted considerable interest in pharmaceutical and biomedical applications, including controlled drug release, gene delivery, and biomolecular sensing. In this study, fluorescent amphiphilic block copolymers were designed to facilitate interactions with biological molecules, such as DNA and antiviral agents, enabling their behavior to be monitored through fluorescence spectroscopy. Two novel block copolymers, poly(methyl methacrylate)-b-poly(dimethylaminoethyl methacrylate-co-naphthyl methacrylate) [PMMA-b-P(DMAEMA-co-NMA)] and poly(styrene)-b-poly(tert-butyl acrylate-co-naphthyl methacrylate) [PS-b-P(t-BA-co-NMA)], were synthesized successfully via atom …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 183–196 Read article
-
In-Situ Polymerized GO/PANI Composites: Structural Evolution, Optical Modulation, and NH₃ Sensing at Room Temperature
Abstract: Graphene oxide (GO)/polyaniline (PANI) composites with varying PANI contents (20, 40, and 60 wt%) were synthesized via in-situ oxidative polymerization and systematically investigated for their structural, morphological, optical, and gas-sensing properties. X-ray diffraction (XRD) confirmed a progressive increase in interlayer spacing and partial exfoliation of GO layers with increasing PANI content, indicating intercalation-assisted hybridization. Fourier transform infrared (FTIR) spectroscopy revealed the characteristic vibrational bands of both constituents and confirmed strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 509–525 Read article
-
Doping of Cerium, Boron and Sulphur with ZnO Nanoparticles and their Impact on Lattice Parameters, Studied through UDM Model
Abstract: Un-doped and tri-doped ZnO nanoparticles were successfully synthesized by the simple sol-gel method. Tri-doped nanoparticles of ZnO were prepared by using Ce, B and S as a dopant in concentrations of 1, 2 and 4 wt% with respect to ZnO. The effect of Ce, B and S on the ZnO nanoparticles was investigated by using X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) techniques against particles …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 1, 2017 · pp. 21–28 Read article
-
Synthesis, Characterization and Drug Delivery Application of Poly (Acid Fuchsin) Based Triblock Copolymer
Abstract: Synthesis, characterization and its drug delivery application of Poly (acid fuchsin) (PAF) was done under inert atmosphere. The (M0/I0) was maintained at 100. In order to increase the molecular weight and processability, it was block copolymerized with ε-caprolactone (CL) and tetrahydrofuran (THF) separately. The conductivity value of PAF was found to be decreased after the chemical conjugation with poly(ε-caprolctone) (PCL) and poly(tetrahydrofuran) (PTHF) blocks. Thus obtained triblock copolymer was subjected …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 2, 2016 · pp. 33–43 Read article
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Determination of Heavy Metals in Soil Samples in the Vicinity of Liquid Natural Gas Project, Shabwah Governorate, Yemen
Abstract: The present work aimed to determine the contaminants in soils resulting from or deposited due to emissions that come from natural gas in the area of Balhaf which is an LNG project in Republic of Yemen. Total of 8 surface soil samples were collected at depth of approximately (0–10 cm) from two sites which has different distances from the natural gas liquefaction project, took 4 samples from first site. The …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 67–76 Read article
-
Radiation Effects in Acrylonitrile (AN) Ethyl Methacrylate Copolymer by Spectroscopic and Thermal Methods
Abstract: Gamma irradiation effects in acrylonitrile (AN) ethyl methacrylate (EMA) (AE) copolymer have been investigated by electron spin resonance (ESR), Fourier transform infrared (FTIR) and differential scanning calorimetric (DSC) techniques. Temperature and radiation dose dependent effects have been investigated by recording ESR spectra under different conditions. Computer simulation techniques are used to analyze ESR spectra to identify of free radical produced on irradiation of copolymer. As such, ESR spectrum of irradiated …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 22–29 Read article
-
Surface modification of polymeric membranes using plasma treatment: A comprehensive review
Abstract: In the contemporary science era, polymer membranes have a wide range of services. Polymeric membranes have very good bulk properties having potential applications in various processing industries.These membranes can be even modified using various techniques. The surface modifications of membranes to incorporate various hydrophilic functional groups without changing the bulk properties has gained popularity. The surface becomes hydrophilic because new polar functional groups are formed. For instance, after oxygen and …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 91–100 Read article
-
Effects of Plasticizers on Structures of Chemical Functional Groups, Morphologies, Water Vapor Permeability, and Thermal Properties of HPMC/BW Biopolymer Films
Abstract: Food preservation is one of the fields that many researchers are interested in, especially in the epidemic period like COVID-19 today. The better food or agricultural products are preserved for a long time, the more it ensures social stability for state management related to food security for people. This paper introduces one kind of biopolymer films with investigation on effect of plasticizers to its characteristics. In order to produce biopolymers, …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 10–20 Read article
-
Role of GO and rGO on the Structural Properties of PA6/PMMA Blend Nanocomposites
Abstract: To understand and assess the role of Graphene Oxide (GO) and reduced graphene oxide (rGO) in the PA6/PMMA blend, nanocomposites, the PA6/PMMA (50:50 wt%) blend-based nanocomposites were prepare by loading different wt% of GO and rGO (1wt% and 3wt%), through twin screw melt extrusion followed by injection moulding technique. Different compositions of the nanocomposites were prepared using melt mixed method at 2300C by applying a rotational torque 50 N. All …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 1–10 Read article
-
Influence of B2O3 and Li2O on Physical, Thermal and Spectroscopic properties of Bi2O3-B2O3-CdO-Li2O glass system
Abstract: ABSTRACT Bismuth Borate based glasses with compositions BiBCL: 40Bi2O3-(40-X) B2O3-20CdO-XLi2O where x=5,10,15,20,25 mol% were prepared by conventional melt quenching technique. X-ray diffraction (XRD), differential thermal analysis (DTA), UV-VIS absorption spectroscopy, Fourier transform-infrared (FTIR), and Raman spectroscopies were used to analyse the synthesized samples. Through XRD and SEM studies, the synthesized glasses amorphous nature was confirmed. To evaluate the physical and structural characteristics of the glasses, calculations were made for the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 51–62 Read article
-
Characterization of PANI-CNT Composite Flexible Dry Electrodes for Long-Term ECG
Abstract: Abstract Study of polymer dry electrodes in sensing biological signals has received attention as the nature of the polymer to bend that supports electrode’s contact and also avoids skin irritations and allergic reactions. As a polymeric substrate, we have used polyaniline (PANI) as it has very good conductivity, environmental stability, lower price and facile synthesis. Carbon nanotube (CNT) is added to the substrate to increase the overall electrical, magnetic, mechanical, …
Published in Recent Trends in Electronics Communication Systems · Vol. 3, Issue 3, 2016 · pp. 1–6 Read article
-
Formulation Development and Evaluation of Sublingual Tablets of Enalapril Maleate Using Co-processed Superdisintegrants
Abstract: Enalapril Maleate is anti-hypertensive drug and its oral bioavailability is 40%. Sublingual tablets of Enalapril Maleate were prepared to improve its bioavailability, to avoid pre-systemic metabolism and hepatic first pass elimination. Tablets were prepared by wet granulation technique using two different superdisintegrants KYRON-T-314 and INDION-414 in the different ratio (1:1, 1:2 and 2:1) by co-processing and physical mixing. FTIR (Fourier transform infrared spectroscopy) and DSC (differential scanning calorimetry) spectroscopic studies …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 5, Issue 3, 2014 · pp. 24–39 Read article
-
A Study on the Synthesis and Characterization of Silver Metal Nano Particles with Acrylic Acid– Acrylamide (Aa) Copolymer as Mediating Agent
Abstract: Silver metal nano-particles (MNP) have been synthesized by chemical methods with acrylic acid- acryl amide (AA) copolymer as mediating agent. Formation and interaction of silver metal nano- particles with AA copolymer has been confirmed by ultraviolet–visible (UV-VIS), Fourier Transform Infrared (FTIR) techniques. Thermal and morphological properties of the composite have been studied by Differential Scanning Calorimetry (DSC) and Scanning Electron Microscope (SEM) techniques. Change in intensity together with shift of …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 6, Issue 3, 2016 · pp. 1–4 Read article
-
Characterization of Pure and Ag Doped ZnO Nanostructure and Study the Effect of Calcination Temperature on Bacterial Growth of Ag Doped ZnO Nanostructure.
Abstract: Sol-Gel chemical precipitation method has been implemented to synthesize Ag doped ZnO nanoparticles at 50°C. Wurtzite hexagonal crystal structure of pure and ZnO(Ag) nanoparticles have been confirmed by X-ray Diffraction (XRD) data. The crystalline size and have been estimated using XRD data. The chemical composition of pure and Ag doped ZnO nanoparticles has been investigated by analysis of Fourier transform infrared (FTIR) spectroscopy. The direct band gap of nanoparticles has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 8, Issue 2, 2018 · pp. 31–38 Read article
-
Preparation and Characterisation of Activated Carbon from Rice Husk and its Polyvinylpyrrolidone (PVP) Composite for Heavy Metal Removal from Simulated Wastewater
Abstract: AbstractRemoval of heavy metals from industrial wastewater is of importance due to rapid increase in global industrial activities. This investigation deals with the preparation of adsorbentactivated carbon from agricultural waste material such as coconut shell, orange peel, ricehusk, peanut husk and sawdust to remove heavy metals from wastewater. The abundance and availability of rice husk, an agricultural waste, make them as a good source for precursor of activated carbon. Hence, …
Published in Journal of Water Pollution & Purification Research · Vol. 4, Issue 3, 2017 · pp. 10–15 Read article