Search
73 articles for “Abrasion”
-
Thermo-Mechanical Behavior and Intelligent Optimization of Contact Temperature During Ultrasonic Vibration-Assisted Single-Pole Magnetic Abrasive Finishing of Zinc Alloy
Abstract: This study proposes a new integration of the experimental analysis, multi-physics finite element modelling (FEM) and machine learning (ML) optimisation of contact temperature (CT) in ultrasonic vibration-assisted single pole magnetic abrasive finishing (UV-SPMAF) of zinc alloy. The three gaps of the research are addressed: (i) The absence of a multi-physics FEM model that can couple electromagnetic, thermal and structural fields for UV-SPMAF of zinc; (ii) No quantified contribution of the …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 2, 2026 Read article
-
Super Ni 718 Machinability Investigation on Electrical Discharge Machining Using Hybrid Al 7(075+178) Electrode Under Abrasive Assisted Dielectric
Abstract: As aluminum alloy is the lightest metal and has the best mechanical qualities among metal, it has proven to be a perfect choice for strututal industry, particularly in the aerospace sector.7xxx alloys from the Al alloy family are widely used in aviation constructions due to their outstanding processing, welding efficiency, great specific strength & stiffness, and high toughness. The two aluminum alloys that are most frequently used in airplane structures …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1–17 Read article
-
Enhancing Concrete Strength: Investigating the Impact of Glass Fines on Mechanical Properties
Abstract: The global emission of CO2 from cement industries poses a significant environmental challenge, being a primary contributor to environmental issues. Numerous researchers have explored alternative cementitious materials to formulate robust and long-lasting concrete. This study focuses on utilizing waste glass powder (GlP), derived from rejected soda-lime glass bottles collected from various sources, for experimental purposes. The laboratory experiments investigate the behavior of concrete incorporating glass as a partial substitute for …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 15–23 Read article
-
Study of Wear Behaviour of GFRP Composites filled with Nanofiller using Taguchi Technique
Abstract: AbstractThe GFRP laminates are fabricated by hand lay-up process followed by vacuum bag curing and post cured in a heating oven. The laminates are fabricated with addition of 1%, 1.5% and 2.0% graphene filler and prepared laminates are cut into ASTM standards by using water jet cutting. The density and volume fraction of the void fabricated composite is determined. The three-body abrasive wear test is carried out on abrasion tester …
Published in Recent Trends in Fluid Mechanics · Vol. 5, Issue 3, 2018 · pp. 33–38 Read article
-
Durability of Bond Strength between Titanium and two PMMAs
Abstract: The purpose of this study was to determine the durability of the bond strength between titanium and PMMA denture base resins. Two commercial PMMA denture base resins and three bonding systems were used in the present study. A total of 224 rod shaped specimens of Grade 2 titanium alloy were divided into 16 groups of 14 each. Half of the titanium rods were treated with 50 µm alumina air abrasion …
Published in Research and Reviews: A Journal of Dentistry · Vol. 4, Issue 2, 2013 · pp. 8–14 Read article
-
Analysis of Physical Properties of Polyethylene Terephthalate Coated Aggregates used in Bituminous Concrete Mixes
Abstract: The main cause of climate change that the world has been facing for several years is burning of plastic waste in open air. To contribute to solution of this problem, an investigation was carried out with utilization of plastic waste in bituminous mixtures used in flexible pavement.With varied amounts of Polyethylene Terephthalate (0%, 6%, 6.5%, 7%, 7.5%, and 8%) of asphalt content, variousdesirable properties of aggregates required for bituminous mix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 206–213 Read article
-
Synergistic Procurement and Molecular Characteristics of Full Grain Leather in Advanced Material Engineering
Abstract: This article explores the molecular characteristics and engineering processes involved in the production and application of full-grain leather, recognized for its premium quality due to its intact granular structure. Full-grain leather, undivided into split layers, maintains a robust and durable molecular composition, making it a preferred material in high-quality garment manufacturing. The study emphasizes the role of leather conditioners in restoring the molecular suppleness and moisture retention of leather, crucial …
Published in International Journal of Advance in Molecular Engineering · Vol. 2, Issue 2, 2024 · pp. 8–13 Read article
-
A Literature Review on Extrusion/Spheronisation-A Pelletization Technology
Abstract: Extrusion-spheronization is a leading pelletization technology, widely favored for its economic and commercial viability. It is a cost-effective method suitable for large-scale production, making it the most efficient approach for oral drug delivery. This process provides multiple benefits, such as improved flow characteristics, lower friability, a narrow particle size range, easier coating, consistent packing, reduced likelihood of dose dumping, and more predictable gastric emptying. Pellets usually measure between 0.5 and …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 1, 2025 · pp. 61–71 Read article
-
Enhancing Physical Properties of Unfilled SBR Rubber Compounds using Nano CaCO3 Additive
Abstract: The push for rubber compounds with improved characteristics in the rubber industry has sparked extensive research strategies for developing novel rubber compounds with improved properties like tensile strength, abrasion resistance, rolling resistance and flex properties etc., especially for the automobile industry. To intensify the processability, performance, and look of materials such as plastics, rubbers, paints, color, printing, and lubricants, additives are often employed to improve their qualities and overall value …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 40–49 Read article
-
Design and Development of an Automated Robotic Algorithm for Blasting, Painting, and Barnacle Cleaning of Offshore Structures
Abstract: Marine surface maintenance tasks such as barnacle removal, abrasive blasting, and protective painting are traditionally carried out using manual methods that are labor-intensive, hazardous, and prone to variability in quality. These challenges are particularly significant for offshore structures, where harsh environmental conditions and restricted accessibility increase operational risks and maintenance costs. This paper presents the design and evaluation of an autonomous robotic system for automated surface preparation and coating of …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 1–12 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background: Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their high solar irradiation. The rising number of dust storms, as well as depositing particulate matter into the air, has caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 28–38 Read article
-
Influence of FEF (N550) Carbon Black on Rheological and Physico-mechanical Properties of SBR Vulcanizate for Tyre Application
Abstract: This study aims to investigate the synergistic effect of Fast extrusion furnace black on the rheological, surface morphological and physico-mechanical properties such as tensile strength, hardness and specific gravity of styrene-butadiene synthetic rubber composite. SBR is an elastomer which is an important sort of synthetic rubber. It is a copolymer whose molecular structure primarily consists of organic compound styrene and butadiene chain. Fast extrusion furnace black and high abrasion furnace …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 48–58 Read article
-
Comprehensive Review on Brake Friction Materials
Abstract: In the current study the compo-casting Al alloy MMCs' wear resistance was examined under a variety of abrasive circumstances, including coefficient friction, wear rate and it’s sliding distance. The AZ91E matrix composite was made by the liquid metallurgy process and reinforced with aluminum plated zirconium dioxide (ZrO2) particles. Designers examined the characteristics of matrix alloys along with created composites. friction and wear from dry sliding experiments had been performed on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 324–338 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Strategies for Preventing Injuries in In-line Skating: A Comprehensive Guide
Abstract: Inline skating combines competitive sports and physical fitness with recreational enjoyment, appealing to a diverse demographic. However, the sport carries inherent risks such as fractures, sprains, abrasions, and head injuries, emphasizing the critical need for effective safety measures. This article synthesizes insights from comprehensive literature reviews and expert opinions to propose evidence-based strategies for injury prevention in inline skating. Key recommendations include wearing proper protective gear such as helmets, wrist …
Published in Recent Trends in Sports · Vol. 1, Issue 1, 2024 · pp. 27–34 Read article
-
Investigation on Dry Sliding Wear Behaviour of AlSi7Mg0.3/B4C/ZrO2 Hybrid Composites using Taguchi Method
Abstract: Hybrid Aluminium/Boron carbide/Zirconium oxide (AlSi7Mg0.3/B4C/ZrO2) composites were fabricated utilizing stir casting technique by varying boron carbide content (4wt.%, 8wt.% and 12wt.%) and utilizing a fixed amount (4wt.%) of zirconium oxide particles. Optical microscopy revealed that B4C and ZrO2 particulates were dispersed uniformly in AlSi7Mg0.3 matrix. Dry sliding wear experiments were carried out utilizing the pin-on-disc tribometer with various levels of applied loads, sliding speeds and weight percentage of boron carbide …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 166–177 Read article
-
Nucleonic Level Measurement in Fluid Catalytic Cracking Unit, Oil & Gas Refinery
Abstract: The measurement of ‘Level’ is crucial in an Industrial Process, as low levels can cause problems and damage equipment. In contrast, high levels can cause overflow and potentially create safety and environmental problems. When working with the Fluid Catalytic Cracking System Unit (FCCU) in Refineries, there are requirements for various types of level measurement instruments. One of them is the Nucleonic Level Measurement device used in the process involved in …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 3, 2024 · pp. 41–49 Read article
-
Experimental Study on the Wear Mechanisms of Cutting Tools in High-Performance Machining
Abstract: Because high-performance machining (HPM) may increase output and improve product quality, it is essential for modern production. The quick wear of cutting tools under high-stress circumstances, however, presents serious difficulties that affect surface smoothness, tool life, and cost-effectiveness. Through an analysis of the impacts of cutting speed, feed rate, tool material, and cooling techniques, this work explores the wear processes impacting cutting tools in HPM. Advanced spectroscopy and microscopy procedures …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 9–14 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article
-
CFD Analysis of a Bladeless Propelling Unit for the Drones
Abstract: Conventionally, unmanned aerial vehicles (UAVs) and autonomous aerial vehicles (AAVs) utilize bladed propellers to produce lift, altitude, and thrust for propulsion. Yet, these blades are susceptible to abrasion when they contact external surfaces, resulting in diminished operational efficiency over time. Our ongoing investigation introduces a pioneering approach by integrating bladeless propeller technology, drawing inspiration from Dyson’s Bladeless Fan Theory. This study seeks to address the wear-related shortcomings of conventional propeller …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 37–46 Read article