Search
1286 articles for “OWASP Top-10”
Nothing matched all of your words, so these match any of them.
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Evaluation of CI Engine Performance and Emissions Using WB10CNT90: A CNT-Reinforced Biodiesel Blend Approach and its Marketing Prospects for sustainable fuel Commercialization
Abstract: The experimental and analytical evaluation of the WB10CNT90 blend—a combination of 10% waste biodiesel derived from Madhuca longifolia, 90% conventional diesel, and 100 ppm Multi-Walled Carbon Nanotubes (MWCNTs)—demonstrates its potential as an efficient and eco-friendly alternative to conventional diesel. The Brake Thermal Efficiency (BTE) of the engine increased by approximately 15%, indicating enhanced energy conversion efficiency during combustion. Simultaneously, the Brake Specific Fuel Consumption (BSFC) showed a reduction of nearly …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 741–759 Read article
-
Design And Analysis of Carbon Filler Reinforced Composite Small Wind Turbine Blades
Abstract: Although wind turbines have great potential for capturing wind energy, their blades suffer from unstable aerodynamic loads as a result of operating for extended time in challenging conditions. Both structural and aerodynamic performance are negatively impacted by these loads. The effectiveness of the wind turbine and the use of wind energy are significantly impacted by the choice airfoil. Commonly used airfoils include NACA 4412, NACA 23012, and SG6043. The lift …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 79–89 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Automated Intelligence, Machine Learning, and Big Data in Education: A Practical Framework, Synthetic Demonstration, and Deployment Guidance
Abstract: Artificial intelligence (AI), machine learning (ML), and big-data methods are increasingly used to improve educational decision making through personalization, early-warning systems, scalable feedback, and operational analytics. This manuscript proposes a practical end-to-end framework for educational AI/ML projects, covering problem definition, data engineering, modeling, evaluation, intervention design, and responsible governance. To provide a complete and reproducible template without exposing sensitive student data, we present a synthetic demonstration study that mirrors typical …
Published in Journal of Computer Technology & Applications · Vol. 17, Issue 1, 2026 Read article
-
Comparative Analysis of Different Mechanical Properties of Banana Pseudostem Fiber and Pineapple Leaf Fiber Reinforced Polymer Composite
Abstract: In this research, a hybrid natural fiber polymer composite is prepared using different combinations of banana pseudostem fiber and pineapple leaf fiber in a discontinuous reinforcement phase and epoxy polymer in a continuous matrix phase. For the preparation of the composite, the hand layup technique is used and important mechanical characteristics, namely tensile, flexural, and impact strength, are determined. The findings of this investigation represent that the highest values of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1248–1256 Read article
-
Creating a “Sustainable Future” Through Secure AI
Abstract: It is imperative in the present world that we figure out a way to move toward a sustainable future. However, a sustainable future from an energy standpoint can only be built by a sustainably intelligent society. Yet, individuals who come together to form a society tend to neglect discussions around sustainability, considering it something that should be driven in a top-down manner. In reality, with the rapid emergence of artificial …
Published in Journal of Software Engineering Tools & Technology Trends · Vol. 13, Issue 1, 2026 · pp. 1–7 Read article
-
Analyzing the Performance and the Emission Characteristics of Palladium Catalyst using different blends of Methanol Fuel and Nano Particles of Aluminium and Titanium Oxides
Abstract: The high cost and limited availability of precious metals prompted the automotive industry to explore alternative materials for improving catalytic converter performance. This research focuses on the development and optimization of catalytic converters designed to reduce exhaust emissions, ensuring compliance with market needs and regulatory standards. Specifically, it investigates the three-way catalytic converter in a four-stroke engine utilizing commonly available noble metals, particularly palladium as the catalyst. The best way …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1505–1517 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Bioremediation of Crude Oil-Contaminated Loamy Soil Using Plantain (Musa Paradisiaca) Stem Waste as a Biostimulant
Abstract: Crude oil contamination of soil is a pressing environmental challenge in oil-producing regions, especially in the Niger Delta of Nigeria. It degrades soil fertility, disrupts microbial ecosystems, and poses long-term ecological and health risks. Traditional remediation methods are often cost- prohibitive and environmentally intrusive, prompting the search for sustainable alternatives. This study investigates the potential of plantain (Musa paradisiaca) stem waste – a readily available agricultural byproduct – as a …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 1, 2026 · pp. 1–11 Read article
-
Eco-Sustainable Walnut–Hemp Reinforced Composites for Automotive Brake Applications
Abstract: The search for natural fiber-reinforced composites that can be used instead of manmade materials has been sparked by the growing need for eco-friendly materials in car brake systems. The study looks at three types of Walnut–Hemp Reinforced Friction Composites (WFRCs): WFRC-1, which is 10% walnut and 20% hemp; WFRC-2, which is 15% walnut and 15% hemp; and WFRC-3, which is 20% walnut and 10% hemp. Aspects like tensile strength, compressive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 439–448 Read article
-
Multi-Sensor System for Underwater Pothole Detection to Enhance Road Safety During Monsoon Seasons
Abstract: Monsoon seasons across India and similar tropical regions severely compromise road safety by causing water accumulation that conceals dangerous potholes beneath stagnant pools, leading to frequent vehicle damage, tire punctures, and fatal accidents. Traditional detection methods relying on smartphone accelerometers, ultrasonic sensors, or machine vision fail under flooded conditions due to acoustic signal reflection at water surfaces and optical distortions from glare and turbidity. This research proposes an innovative multi-sensor …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 25–32 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Mechanical Characterization of Al6061 Hybrid Composites Reinforced with Boron Carbide and Fly Ash via Stir Casting
Abstract: The growing demand for lightweight, cost-effective, and high-performance materials in structural and automotive sectors has accelerated the development of hybrid metal matrix composites (HMMCs). This study investigates Al6061 alloy as the matrix material, reinforced with varying weight fractions of boron carbide (B₄C), a high-hardness ceramic, and fly ash, an economical industrial byproduct, to assess their synergistic effects on mechanical properties. Hybrid composites were synthesized using the stir casting technique to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1711–1719 Read article
-
Machine Learning Assisted Optimization of Nanoscale MOSFET Parameters Using TCAD Simulation
Abstract: This paper presents a machine learning (ML) assisted framework for the multi-objective optimization of nanoscale bulk n-channel metal-oxide-semiconductor field-effect transistors (nMOSFETs) with a 10 nm physical gate length, high-k HfO₂ gate dielectric, and TiN metal gate. Technology computer-aided design (TCAD) simulations employing drift-diffusion transport, Shockley-Read-Hall recombination, Lombardi mobility degradation, and density- gradient quantum correction models are used to generate a parametric dataset of 2,400 device configurations spanning gate length (L), …
Published in Journal of Microelectronics and Solid State Devices · Vol. 13, Issue 1, 2026 · pp. 10–19 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
Study of pH Behaviour of Slurry on Surface Morphology of Copper Material with Single Pole Magnetic Abrasive Finishing Process
Abstract: The chemical oxidizers—sodium hydroxide, Marshall’s acid salt, and hydrogen peroxide—were effectively employed in the wet polishing of copper using the SPMAF experimental setup. The manuscript explores preparation of slurry used for polishing copper material using single pole magnetic abrasive finishing (SPMAF) framework. The slurry contains distilled water, 1200-grit aluminum oxide abrasives, sodium hydroxide (NaOH), potassium persulfate (K₂S₂O₈), and hydrogen peroxide (H₂O₂), combined in precise amount. Specifically, 100 ml of distilled …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1887–1896 Read article
-
Performance Enhancement of COC-Modified LLDPE Films: Optimization of Stiffness, Tear Resistance, and Barrier through Plasma Surface Modification
Abstract: This study explores the development of high-performance packaging materials by blending commodity Linear Low-Density Polyethylene (LLDPE) with engineering cyclic olefin copolymer (COC) as a performance modifier. To leverage the processability of LLDPE alongside the structural rigidity of COC, blends were prepared at various weight ratios (95/05, 90/10, 85/15, and 80/20) using twin-screw melt extrusion, followed by the production of films and sheets via blown film extrusion and compression molding. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 128–143 Read article