Search
1252 articles for “composition”
-
AL6061/Al2O3-Ash Reinforced Composites: An Experimental and Statistical Study Using Ultrasonic Stir Casting
Abstract: This study presents an experimental investigation on the influence of fly ash particle size on the mechanical properties of aluminum alloy (Al6061) composites fabricated through Ultrasonic Assisted Stir Casting. Fly ash, a low-cost and low-density by-product of thermal power plants, has emerged as an effective reinforcement material due to its excellent fluidity, high filling capability, and ease of processing. It has been increasingly utilized in metal, polymer, and rubber composites …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1123–1133 Read article
-
Firefly Algorithm–Based Optimization of Processing Parameters for Enhanced Performance of Polymer Composite Materials
Abstract: Polymer composite materials are extensively used in aerospace, automotive, and oil & gas applications due to their high strength-to-weight ratio and design flexibility. However, achieving optimal mechanical and thermal performance strongly depends on precise control of processing parameters such as curing temperature, energy consumption, and material utilization. Conventional trial-and-error approaches often lead to excessive energy usage, non-uniform curing, and sub-optimal composite properties. To address these challenges, this paper proposes an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 90–107 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
A Systematic Review of Advanced Composite Materials for High-Performance Spur Gear Applications
Abstract: This is a review which provides specific and detailed information regarding the fiber-reinforced polymer (FRP) composite to replace traditional steel in high-performance spur gears with emphasis on mechanical performance, computational modeling, and experimental validation. Methods: The current literature was thoroughly investigated that includes material properties, material simulation (e.g., finite element analysis, FEA), and experimental gear testing procedures (e.g., DIN 51354, ASTM G99). Certain case studies in the aerospace and automotive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 209–220 Read article
-
Study on Thermal and Electrical Performance of Pani Doped Graphene Composites under Solar Light Irradiation
Abstract: Here in the research work focusses on the study of thermal and electrical performance of PANI doped graphene composites fabricated by chemical way. A sequence of conducting polymer oxidative method done using the polymerization of aniline in the presence of graphene was deliberate under solar light irradiation. The composites were inspected and characterized using spectroscopy and microscopy studies. The thermal/ electrical performance of PANI and PANI doped graphene were evaluated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1134–1146 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Review and Analysis of Biodegradable Polymer Composites for Sustainable Hotel Packaging Applications
Abstract: Given the fast expansion in the hospitality and tourism industry, the decline in single use packaging materials has greatly amplified the quantity of plastic wastes, as well as the destruction of the environment. The present review is dedicated to the design and use of biodegradable polymer composites (BPCs) as the sustainable solution to the hotel packaging. The paper will be a synthesis of recent developments in the field of natural …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 348–365 Read article
-
Integration of Polymer and Composite Materials in Modern Culinary Practices: An Assessment of Innovation Gaps in Uttar Pradesh's Hospitality Sector
Abstract: The hospitality industry is experiencing a swift change owing to the material innovation, sustainability demands, and changing consumer expectations. Polymer and composite materials have become key facilitators of contemporary culinary life and as such, they possess the following benefits; lightweight design, durability, thermal resistance, hygiene, and design flexibility in kitchenware, food packages, service ware, and intelligent culinary devices. Nonetheless, the incorporation of high-quality polymer and composite materials into the local …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 431–446 Read article
-
Intelligent Optimization of Drilling Parameters in Polymer Composites using Machine Learning and Metaheuristic Techniques
Abstract: The study tests different ways to use ML and metaheuristic algorithms to determine the best drilling parameters for polymer matrix composites. The research uses a composite matrix made from 55.25% vinyl ester, 44.0% Nickel–Phosphorous coated glass fiber and 0.75% Al₂O₃ nanowires which are tested for tensile strength (64.57 MPa), flexural strength (85.86 MPa) and impact strength (71.79 kJ/m²). By applying a Taguchi orthogonal array, it is observed that a slower …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1795–1810 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Influence of Epoxy-Based Thermally Conductive Polymer Composites on the Thermo-Hydraulic Performance of Finned Helical Coil Heat Exchangers Across Flow Regimes
Abstract: The use of polymer composites in heat exchanger applications has gained increasing attention due to their advantages in weight reduction, corrosion resistance, and design flexibility. However, their relatively low thermal conductivity compared to conventional metallic materials remains a key limitation for efficient heat transfer. In this study, the thermo-hydraulic performance of a finned helical coil heat exchanger is investigated with particular focus on epoxy-based polymer composites reinforced with thermally conductive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 586–602 Read article
-
Fibre Orientation and Void Distribution Analysis in Polymer Composite Structures Using Image Processing
Abstract: Fibre orientation and void distribution are critical microstructural features that govern the mechanical performance and reliability of polymer composite materials. Accurate and simultaneous characterisation of these features remains challenging due to their complex spatial interactions and dependence on processing conditions. In this work, an integrated image-processing framework is proposed for the quantitative analysis of fiber orientation and void distribution in polymer composite structures. High-resolution composite microstructure images are processed through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 925–933 Read article
-
Cyber-Secure IoT Framework for Monitoring Fiber-Reinforced Polymer Composites Using Embedded Sensors
Abstract: The present research paper suggests a cyber-safe Internet of Things system in real-time monitoring of fiber-reinforced polymer composites with inbuilt sensors. It is aimed at enhancing structural health maintenance, using sensual, intelligent analysis, and data protection in the same platform. Multi-layer architecture An embedded sensor, signal processing, anomaly detection and lightweight layer of cyber-security are developed. Experimental validation is done under controlled conditions and the performance is measured by these …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 434–458 Read article
-
Polymer-Based Acoustic Composite Materials for Urban Noise Mitigation: Design, Performance and Legal Integration
Abstract: This study explores the development and use of polymer-based acoustic composite materials for effective urban noise mitigation, wherein the performance of the materials is linked to legal compliance frameworks. Rapid urbanization has intensified noise pollution from transportation, industrial activity, and construction, posing a serious threat to public health and environmental quality. Although regulatory standards exist, their implementation is often limited due to inadequate technical interventions. This research focuses on advanced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 403–412 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Polymers and Composites in the Design and Construction of Unmanned Aerial Vehicles: A Comprehensive Technical Review
Abstract: The emergence of Unmanned Aerial Vehicles (UAVs) over the last few years has mostly been made possible by breakthroughs in material science. This review is concerned with an overview of some of the polymers and composites that are being commonly used in drone manufacturing in recent times, especially in relation to the influence of material choice on drone performance and capability. It sheds light on the drastic change in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 874–882 Read article
-
Development of Neuromorphic Polymer Composites Using IoT Sensing and Brain-Inspired Learning Algorithms
Abstract: This research aims to develop neuromorphic polymer composites by combining conductive sensing materials, IoT-based sensing data collection and brain-inspired learning models for adaptive response. Hybrid conductive polymer composites were developed by adding carbon nanofibers and graphene Nano platelets to a thermoplastic polymer. IoT sensors (strain, temperature) were employed to collect real-time sensing data that was combined with environmental data. A material-aware neuromorphic learning algorithm was created with event-driven spike coding …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 755–784 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article