Search
1969 articles for “RMSE of 0.052” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
STATIC STRUCTURAL ANALYSIS OF TURBOCHARGER TURBINE
Abstract: This research is done to detect the best material for the advancement of engine. This is based on types of material used for different speed varying from 50,000rpm - 80,000rpm at different mass flow rate of air i.e., 0.06kg/s & 0.08kg/s. In this research paper two material are used. The two materials are INCONEL & NIMONIC80A.Previously, various alloys are their which had been used like Titanium Alloys and Magnesium Alloys. …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 Read article
-
Design of 6-Bit Two-step Flash ADC for High Speed and Low Power Applications
Abstract: In this paper, 6-bit two-step Flash ADC operated at the 2 GS/s is designed, with optimized performance for frequency domain applications. To get the best performance, the coarse convertor of 2-bit and the fine convertor of 4-bit are chosen. The comparator design is done with optimum power and area with two power supplies. Intermediate state accuracy increased by thermometer coded current steering DAC. The DNL and INL specifications are chosen …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 29–39 Read article
-
The Resurging Effect of Climate – Human Interaction on the Soil of Abia State, Nigeria: A Climate Change Perspective.
Abstract: Abstract Studies on the impact of climate change on soil erosion have been widely acknowledged by parts of the eastern states of Nigeria as one of the major land degradation problems besetting the area. This study adopts Geographic Information System (GIS) and Remote Sensing techniques as veritable tool to study the effect of Climate – Human interaction on soil of Abia state. Increase in observed mean rainfall of 5.85, 5.62, …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 10, Issue 2, 2020 · pp. 27–44 Read article
-
Evaluation of J-Integral and Fatigue Crack Growth Rate of Semi-elliptical Crack in Compressor Blade
Abstract: Gas turbine compressor blades are subjected to centrifugal, gas bending and vibratory loads. This repeated loading and unloading can reduce the life of compressor blades. This research aims at the estimation of fatigue crack growth rate of various three-dimensional cracks in a compressor blade considering the J-integral calculations for a semi-elliptical crack, subjected to centrifugal loading. Static stress analysis was carried out to ascertain the critical region or crack zone …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 2, 2014 · pp. 39–46 Read article
-
Harmonic Mitigation in Shunt Active Power Filter Regulation Approaches with Synchronous Reference Frame: An Extensive Analysis
Abstract: The Shunt Active Power Filter (SAPF) is discussed in this work as a means of removing line-side current harmonics. The Voltage Source Inverter (VSI) topology serves as the foundation for the Active Power Filter. It resolves the power system's harmonic current issue. Additionally, it balances the load on three phases and compensates for reactive power (if load is unbalanced). After measuring load current, it switches to the dq0 coordinate system. …
Published in Journal of Microcontroller Engineering and Applications · Vol. 10, Issue 3, 2023 · pp. 6–15 Read article
-
Rectangular Patch Monopole Antenna with Different Shaped Multiple Slots for Triple Band Frequency Applications
Abstract: In this paper a rectangular patch microstrip antenna with different shaped multiple slots behaves as a triple band monopole antenna. It is designed for 0.96031–1.0464, 1.3766–1.5797 and 2.1629–2.3708 GHz frequency bands. A rectangular patch monopole antenna with multiple slots, i.e., hexagonal slot and rectangular slot is fabricated on the glass epoxy (FR4 lossy) of dielectric substrate with relative permittivity (εr) of 4.4, thickness of 1.6 mm, loss tangent of 0.02 …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 2, 2014 · pp. 17–24 Read article
-
Electrochemical Recovery of MnO2 from Spent Alkaline Batteries
Abstract: In the alkaline batteries of Zn/MnO2, the electrolytic manganese dioxide (EMD) is used as cathode that constitutes a very important part of household waste which contributes with heavy metals to the solid urban waste. This paper described the recovery of EMD by electro-oxidation on carbon cloth in acidic leached liquors from spent alkaline batteries. The maximum extraction for Mn and Zn were 43.68% (0.744 molL-1) and 56.11% (0.7321 molL-1) respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 9–16 Read article
-
Ab Initio Investigation on Half-Heusler Compounds CoVZ (Z = P, Bi, Sb, As): Understanding Structural, Electronic, Magnetic, and Elastic Behavior
Abstract: The structural, electrical, mechanical, and magnetic properties of Half-Heusler CoVZ (Z= P, Bi, Sb, and As) compounds have been studied using the ab initio method. Here, we use the full potential linearized augmented plane wave (FP-LAPW) method, which is implemented by WIEN2k. The compounds CoVZ (Z= P, Bi, Sb, and As) are near to the Fermi level as implemented in the WIEN2k algorithm, exhibiting 100% spin polarization with finite band …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 3, 2023 Read article
-
Influence of Polypropylene fibres in mechanical properties of fly ash concrete
Abstract: The abundant production of fly ash from coal-based thermal power plants as waste products becoming the problem for their disposal and it is also hazardous to the environment. The inclusion of fly ash in concrete reduces environmental pollution and improves the workability and durability properties of concrete. The present work has been carried out to find mechanical properties such as compressive, split tensile and flexural strength polypropylene fly ash-based concrete …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 54–64 Read article
-
Prediction of Process Parameters of Friction Stir Welding Using Artificial Neural Network
Abstract: In this paper an artificial neural network (ANN) approach is used to predict the process parameters of friction stir welding (FSW). Initially, the experiments are conducted using the design of experiment (DoE) approach on FSW using L27 orthogonal array. The experiments are conducted using speed, feed, and tool tilt angle as input parameters for DoE and tensile strength, hardness, and ductility as output. ANN is created having 25 neurons and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 13–25 Read article
-
Evaluating the Mechanical Attributes of Flexible Polyurethane Foam Produced at Various Pressures
Abstract: This study explores the impact of different pressures (1atm and 0.75atm) on the mechanical characteristics of flexible polyurethane foam, employing varied compositions (0 - 40ppw) of CaCO3. Foam production occurred under two distinct pressure conditions: vacuum pressure and atmospheric conditions. Mechanical properties, including durability, compression set, resilience, support factor, elongation, hysteresis loss, bounce characteristics (including number of bounces), hardness, thickness loss value, elongation percentage, and tear resistance strength, were quantified …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 59–74 Read article
-
Small Scale Horizontal Axis Wind Turbine
Abstract: In this work, the performance analysis of a designed small scale horizontal axis wind turbine (HAWT) has been presented and optimized by varying span length and chord length. The HAWT blades are shaped to generate maximum power from the wind at minimum cost. The blades are designed by using QBlade software and simulated in blade element method (BEM).The values of tip speed ratio and power coefficient have been obtained as …
Published in Journal of Power Electronics and Power Systems · Vol. 4, Issue 3, 2014 · pp. 26–32 Read article
-
Optimization of Mucuna solannie Mud Rheological Parameters
Abstract: The need to optimize rheological parameters by the use of appropriate techniques is the best consideration in drilling mud rheology studies. Various methods are used considering experience on the side of the user, available methods, and flow in pipe or annulus and depending on whether study is done in the field or for research purposes. Mucuna solannie is a legume, and the seed is a viscosifier used in foods in …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 15–26 Read article
-
Dynamic Modelling of Natural Draft Cooling Tower (Case Study of Notore Chemical Company)
Abstract: Determining the impact of air, water, and temperature flow rates on the cooling tower of Notore Chemical Industries is the aim of this study. Using a dynamic and simulation model derived from fundamental ideas, this study produced a model equation for an ordinary differential equation. The Runge-Kulta ODE45 technique, which was implemented in MATLAB R2022A, was then used to solve the model equation.The twenty-four-hour simulation runs at one-hour intervals. To …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 18–24 Read article
-
A Study of Affordable Roofing System using Square Pyramidical Panels
Abstract: Affordability of housing unit is a worldwide concern. The term affordable roofing is used to describe the low cost dwelling units, which are inexpensive and reasonably priced and can easily serve to certain group of people within specified income range. Structural roofing system contributes substantially to cost of construction of housing unit in normal situation; hence, any savings attained in roofing system will reduce the cost of construction of housing …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 1–8 Read article
-
Internal Lattice Structure and Local Order of Ge Atoms Structure in Amorphous Mn doping GeTe Thin Films
Abstract: Phase-change Magnetic materials (PCMMs) represent the leading candidates for universal data storage devices, which exploit the large difference in the physical properties of their transitional lattice structures. Here, an experimental study was done to investigate the internal lattice structure and local order of Ge atoms in amorphous Mn doping GeTe thin films. The microstructure of the as-deposited films of Ge1-xMnxTe thin films (with x = 0.06, 0.13, 0.52 and 0.61) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 9–15 Read article
-
A New TGC-Differential Input Stage to Modify Dynamic Comparator
Abstract: As the technology rapidly scaling down, the escalating demand for higher accuracy is putting a heavy pressure to find ways to get rid of one of the major issues among present day dynamic comparators i.e. random offset voltage generation. A number of offset calibration techniques have been presented to resolve this issue. It has become an important concern to analyze these techniques for scaled down technology nodes to cop up …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 2, 2016 · pp. 74–85 Read article
-
Investigation of Miniature Venturi Flume
Abstract: A venturi flume is a device used to measure discharge in open channel. It consists of a convergent section followed by throat and a diverging section. The venturi flume normally occupies full width of channel on actual field. The present study proposes a new design of miniature venturi flume with reduction in width. The width reduction ratios of miniature flume to channel width (b/B) considered in the project are 0.33, …
Published in Journal of Water Resource Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 26–31 Read article
-
HEC-HMS Based Estimation of Rainfall Runoff Relationship in Central Highlands of Ethiopia, a Case Study in Beressa Watershed
Abstract: Rainfall and runoff are the most frequently used events in hydrology. Calculating of a flow at the outlet of river is vigorous for a number of hydrologic studies like water resource management and flood forecasting. This study supported out to estimate rainfall-runoff relation in Beressa watershed. HEC-HMS model is used to pretend rainfall-runoff process and to apply the rainfall-runoff analysis by using SCS_CN method in Beressa Watershed. A physical based …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 40–63 Read article
-
Heat Transfer Analysis Through External Fins by CFD Tool
Abstract: The natural convection heat transfer from the heated vertical plates to air can be enhanced with the amendment in the shape of the plates. One of the methods for increasing the heat transfer is by the use of extended surfaces such as external fins. This study includes the CFD analysis of the heat transfer enhancement through different fins having various shapes and sizes considering both conductive and nonconductive fins. The …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 1, 2022 · pp. 1–12 Read article