Search
700 articles for “mechanical test”
-
Physical and Mechanical Characterization of Boron carbide(B4C) and waste granite dust reinforced hybrid aluminium composite.
Abstract: In this particular study the concussion of B4C and waste granite dust reinforced on AA6082-T651 hybrid aluminium matrix composite (AMCs)which was fabricated using the stir casting process was investigated.These reinforcements were mixed and varied in the ratio of 1:0,0:1,1:1,1:3,3:1 respectively in the aluminium metal matrix composite .The physical and mechanical characterization of these AMCs were investigated.The obtained results indicate that the density of the composite XCM-5 increased by increasing the …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 17–26 Read article
-
Production of Particle Board from Cotton Stalk
Abstract: The cotton stalks are normally disposed of by burning, which contributes to the emission of harmful greenhouse gases which pollute the environment. This study used cotton stalk for the production of particle board. The study includes collection and preparation of cotton stalk, analyzing using the ASTM method and its morphological structure, determination of proximity and chemical compositions to compare with hardwood characteristics and production of cotton stalk particle board (CSPB) …
Published in Emerging Trends in Chemical Engineering · Vol. 7, Issue 3, 2020 · pp. 23–33 Read article
-
Performance Optimisation of Counter-Directional Orange Peeling Machine
Abstract: The machine was designed to comprise components including frame, cutting tool/post, jaws, clamp, compression and lock, which were assembled together after fabrication. The machine is clampable on the flat surface. The machine can hold an orange centrally with the aid of two jaws located at both ends of the machine. The cutting tool has a curve like profile and helps in ensuring the cutting tool follows the orange counter-directional as …
Published in Trends in Machine design · Vol. 5, Issue 2, 2018 · pp. 63–72 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Cementing Sustainability: Utilizing Waste Foundry Sand to Enhance Concrete Performance and Reduce Environmental Impact
Abstract: The incorporation of waste foundry sand into concrete production represents an environmentally conscious and cost-effective approach. This method involves substituting discarded foundry sand for a portion of traditional fine aggregates in concrete mixtures. The primary objective is to address environmental concerns associated with waste disposal while simultaneously achieving cost efficiency in construction materials. By integrating waste foundry sand into concrete, this practice promotes sustainability by reducing landfill waste and conserving …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 13–21 Read article
-
Experimentation and Investigation of E - Glass Fibre/ Polyester Composites Laminates
Abstract: This paper centres on the autoclave moulding technique, offering a comprehensive analysis of the specimen fabrication process. The advanced composite manufacturing process involves the use of high temperatures and pressures during the curing step. This results in composite specimens that have a higher density and are devoid of any voids. Polyester, E-glass fibre, and SiC powder are the material components that make up the composite in this study. It is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 477–487 Read article
-
Electro Magnetic Force based Train
Abstract: The swift advancement in transportation technology encouraged scientists to seek out faster and eco-friendly propulsion techniques. The majority of transportation systems depend on mechanical engines and wheel-axle setups that generate friction, noise and energy dissipation. Because of these drawbacks there is potential for propulsion approaches. A contemporary technique is propulsion, which utilizes electromagnetic forces rather, than traditional mechanical movement. This research paper addresses the design and operation of a train …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 37–45 Read article
-
A Technical review on Solidification cracking behaviour and susceptibility of aluminum alloy weld
Abstract: The paper deals with the physical, chemical properties along with important aluminum applications. Various defects are generated while welding of aluminum alloys one of the severe defect is cracks. Solidification and liquation cracks are generated at various zones of metals. Different mechanical and metallurgical factors affecting the solidification cracking. A variety of weldability tests like Varestraint test, Transvarestraint test, The Cast Pin Tear test, Hot Ductility test, Strain-To-Fracture test, Reheat …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 77–84 Read article
-
Design and Development of Fiber Sandwiched Composite Materials for the Improvement of Mechanical Properties
Abstract: This research paper presents the development and mechanical characterization of fiber sandwiched composite materials (FSCM) to address the increasing demand for high-strength, lightweight, and corrosion-resistant materials in advanced engineering sectors such as automotive, aerospace, and transportation industries. Traditional homogeneous materials such as metals, ceramics, and polymers often fail to provide a balanced combination of properties like high tensile strength, low density, toughness, abrasion resistance, and impact resistance needed for modern …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 22–37 Read article
-
Bond Response of RCC Cube by using Glass Fiber Reinforced Polymer Bar
Abstract: The results of an experimental examination into the flexural and bond characteristics of Glass fibre reinforced polymer material in structural concrete are presented in this paper. In this study, glass fibre reinforced polymer bars of varied diameters were used. The performance of these bars with full and partial steel bar replacement is investigated. The major goal of this inquiry is to use Glass fibre reinforced polymer bars in water retaining …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 1–6 Read article
-
Advance green fiber reinforced thermosetting composites for reliable assistive device fabrication
Abstract: The biodegradable green fibers derived from natural plants are abundantly available and are currently considered as potential reinforcements. Present study aims at investigating the mechanical properties of green jute fiber reinforced thermoset composites as possible alternatives to the inorganic glass fiber reinforced prosthetic assistive device. Continuous green jute fiber are treated with sodium hydroxide and acetic acid, and then added to epoxy and polyester at varying fiber loadings to produce …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 1–8 Read article
-
Effect of Processing Methods and Fiber Content on Mechanical and Abrasive Wear Performance of Sisal Fiber/PLA Biocomposites
Abstract: AbstractIn this work, an attempt is made to study the effect of processing methods and fiber content on mechanical properties and abrasive wear behavior of polylactide-based biocomposites reinforced with sisal fiber. Three processing methods namely film-stacking, melt- impregnation and solvent-impregnation were used for fabricating unidirectional sisal fiber- reinforced biocomposites. The impact of processing methods and fiber content on biocomposites was assessed through evaluation of mechanical properties, viscoelastic behavior and abrasive …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 1–9 Read article
-
Al-MMC Foam: Synthesis and Characterisation
Abstract: Aluminium alloy composite foams are produced in the laboratory using TiH2-CaCO3 dual foaming agents. The density of the developed material varied along various cross sections. There exists a more pronounced variation in density along the direction of foaming. Compressive and tensile tests are performed on Aluminium Metal Matrix composite (Al-MMC) specimens of different relative density. The compressive stress-strain response of the material establishes their engineering utility in terms of their …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 18–27 Read article
-
Influence of Carbonyl Iron Particle Loading on the Dimensional and Rheological Properties of 4D-Printed TPU-Based Magnetorheological Elastomers
Abstract: The advancement of 4D printing technologies has created new opportunities for fabricating smart materials with tunable properties, including magnetorheological elastomers (MREs). This study investigates the fabrication and characterization of thermoplastic polyurethane (TPU)-based MREs with varying carbonyl iron particle (CIP) loadings (10–50 wt.%) using the fused filament fabrication (FFF) method. MRE filaments were produced through a solvent-assisted mixing and extrusion process, ensuring consistent diameters within 1.75 ± 0.10 mm. Test specimens …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 127–138 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Advancing Pavement Durability and Sustainability through Glass Fiber Reinforced Concrete Technology
Abstract: This research evaluates the application of Glass Fiber Reinforced Concrete (GFRC) for improving road pavement durability and sustainability. The primary objective was to ascertain the optimal glass fiber content that enhances pavement performance while maintaining economic feasibility. To achieve this, experimental investigations compared the mechanical properties of GFRC to traditional Portland Cement Concrete (PCC). The experiments focused on key performance metrics such as tensile, compressive, and flexural strengths, with GFRC …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 760–774 Read article
-
Poly Vinyl Alcohol/Kaolinite Clay/Grafted Cellulosic Fibre Based Hybrid Composite Films: Physical, Mechanical, Optical and Biodegdrability Studies
Abstract: In this study, physical, mechanical, optical, morphological and biodegdrability properties of poly vinyl alcohol (PVA)/kaolinite clay (KC)/grafted barley husk (GBH) based hybrid composite films were prepared by solution casting method. Barley husk was grafted with oleic acid using graft copolymerization method. The hybrid composite films were characterized by FTIR and SEM. Based on the findings from this work, water uptake of the composite films increased with increase in the amount …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 41–52 Read article
-
Generating Weights for Fuzzy Decision Making Mechanism to Diagnose Heart Disease
Abstract: AbstractHeart disease is one of the diseases spread around the world. It suddenly kills the human community. So use of fuzzy logic to diagnosis the heart disease is essential. So the study was conducted with the following components. They are fuzzification, fuzzy decision making mechanism and defuzzification. The crisp values are changed into fuzzy values by fuzzification. Fuzzy decision making mechanism is based on adaptive neuro fuzzy inference system which …
Published in Journal of Computer Technology & Applications · Vol. 6, Issue 2, 2015 · pp. 7–13 Read article