Search
484 articles for “composite characterization”
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Producer Gas Generation by Utilizing Paddy Straw as a Biomass Feedstock in an Open Core Downdraft Gasifier
Abstract: In present day scenario, the burning of paddy straw seriously affects the environment in India. This paper research work is utilized to solve the above-mentioned problem. In this research work, a downdraft gasifier is used for the gasification process of paddy straw for generating Producer gas (PG). The process is carried out with air as gasifying agent. The gas composition, calorific value, temperature, and efficiency are taken as performance characteristics …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 301–310 Read article
-
New Analytical Reagents and Study of Preparation, Spectral Characterization, Scanning Microscopy, and Solubility Behaviors
Abstract: Chemical reagents used in chemical processes vary depending on the process in which they are used, but in general, chemical reagents are used to conduct quality analyses, to determine the contents of various chemical elements in raw materials and in finished products, to adjust the pH and alkalinity of chemical solutions, and to react with other chemicals and produce products. There are some examples of chemical reagents used in chemical …
Published in OmniScience: A Multi-disciplinary Journal · Vol. 14, Issue 1, 2024 · pp. 16–27 Read article
-
Vibration Analysis of Woven Hybrid Carbon-Kevlar Composite Laminates
Abstract: Composite materials have revolutionized the field of engineering and design, providing the ability to combine two or more materials with different properties to create new materials with enhanced characteristics. The intricate process of weaving together carbon fiber and Kevlar fiber to create a 3D composite fabric is not only fascinating but also results in a beautiful, intricate pattern. Hand weaving is an art that requires precision and skill, and when …
Published in Journal of Polymer & Composites Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Preparation and Characterization of Biopolymeric Film for Food Preservation and Packaging: A Review
Abstract: Petroleum-based polymers have been widely used for the production of various products for a long period due to their versatility and durability. However, the increasing demand of these petroleum-based plastic generates tremendous non-degradable plastic waste, leading to significant environmental concerns. Improper disposal practices lead to pollution, posing serious threats to the ecosystem and human health. In response to these challenges, biopolymers have emerged as a promising alternative source that have …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 73–86 Read article
-
Use of Alccofine and Porcelain Waste Aggregate in Concrete Composite for Strength Enhancement
Abstract: Building construction applications benefit from recent studies on alumino-silicate alkaline activation geo-polymers and their supplementary modifier alccofine as well as new process advancements characteristics including flexural strength and split tensile strength determine structural performance and durability. The construction sector utilizes supplementary cementitious materials, waste materials, and Geo Polymer Concrete (GPC) for concrete composites because it requires environmental sustainability along with better functionality and longer service life of concrete structures. This …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 23–33 Read article
-
Tribological Performance and Wear Coefficient Prediction of AA2024–TiC Composites via Python-Based Machine Learning
Abstract: Determining wear coefficient accurately serves as a critical factor to maximize engineering materials' tribological characteristics. The experiment examines the wear characteristics of TiC-reinforced AA2024 aluminum alloy subjected to different tribological operating conditions. A pin-on-disc tribometer performed wear tests under different conditions of load and TiC weight fraction and sliding speed and duration. ANOVA statistical results show that load intensity and TiC reinforcement density stand out as principal variables that affect …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1099–1112 Read article
-
A Review of Glass Fiber Reinforced Composite Materials - Advancements and Challenges
Abstract: The use of glass fiber reinforcement has transformed modern engineering by providing an exceptional balance of strength, lightweight characteristics, and adaptability. This comprehensive review synthesizes findings from over 150 scholarly articles to provide an in-depth analysis of glass fiber reinforcement across multiple sectors. The exploration covers its historical development, manufacturing processes, and diverse applications in aerospace, automotive, construction, marine, and renewable energy industries. Glass fiber’s exceptional strength-to-weight ratio, corrosion resistance, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 635–656 Read article
-
Influence of Rheological and Physical Properties of Particles and Liquid media to compute Terminal Fall Velocity: A Review
Abstract: The hydrodynamic demeanor of falling particles and the liquid media in which they fall, supported by data analytics, is indispensable in the computation of the terminal falling rate. which is a critical concept in many civil engineering disciplines. The application of terminal settling velocity becomes vital to prevent the settling of microplastic particles (< 5 mm in size), several metal particles, polymers, etc.; especially those of irregular shape. Past research …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 28–40 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Modelling and Interpretation of A Novel Battery-Motor amalgamated Thermal Management System using rGO/CO3O4 based Hybrid Nano-composite Coolant for Electric Vehicle Applications
Abstract: Battery and motor have to be given equivalent importance to maintain the lifetime, thermal characteristics, efficiency and safety of Electric Vehicles (EVs). Thermal management of EVs need to be considered for battery and motor because of dynamic loading conditions. This research proposes a novel Battery-Motor Integrated Thermal Management System (BMITMS) for EV applications. An EV assembled with LiFePO4 battery pack and a three-phase induction motor has been considered on this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 225–243 Read article
-
Regional Variation in Amino Acid Composition, Antioxidant and Antimicrobial Activity of Tasar Sericin from North and South Bihar
Abstract: This study investigates geographical differences in biochemical and functional characteristics of sericin obtained from Antheraea mylitta cocoons sourced from two regions of Bihar, India: Bhagalpur (North) and Banka (South). Sericin was isolated via an alkali-assisted autoclaving process. Amino acid profiles were determined using HPLC. Free radical scavenging capacity was measured through DPPH, ABTS, and hydrogen peroxide assays. Antibacterial and antifungal effects were tested against Staphylococcus aureus, Escherichia coli, and Candida …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 16, Issue 2, 2026 Read article
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Design Strategies of Polymer Composite Components for Sustainable Renewable Energy Microgrids
Abstract: Increasing power demand and variable performance requirements in renewable-energy systems motivate integrating advanced polymeric and composite materials into microgrid components to improve reliability and performance. This paper presents a design and control framework for a standalone microgrid that couples power-electronic and energy-conversion subsystems with polymer-composite–based components to enhance durability, thermal management, and electromagnetic shielding. The microgrid uses a doubly fed induction generator (DFIG) for wind generation to enable independent active …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 63–71 Read article
-
Mechanical Strength Prediction of Nano-Silica Concrete Composites Using Machine Learning Techniques
Abstract: Nano-silica, or nanosilica, refers to silicon dioxide nanoparticles, which are a kind of silica (SiO₂) with diameters that often fall below 100 nanometers. This nanomaterial has attracted considerable attention because of its distinctive characteristics and diverse array of uses, notably in augmenting the performance of materials such as concrete. The integration of nanoparticles with cementitious matrix in nano-silica concrete offers a viable approach to improving the mechanical characteristics and longevity …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 963–973 Read article
-
Development and Evaluation of Hybrid Natural Fiber Composites
Abstract: Natural fiber based polymer composites are becoming more common because they are cheap, sustainable, and operate effectively across mechanical and environmental settings. Natural fibers (NFs) like bamboo and roselle are being used to strengthen polymer composites. They are being used in textiles, medical equipment construction, and car making. People are becoming more interested in these fibers because of the unique properties. Bamboo fiber is an effective option for reinforcement in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 908–915 Read article
-
Organic Solar Cell: It’s future prospect
Abstract: Organic solar cells (OSCs) are emerging as a promising frontier in renewable energy technology, distinguished by their lightweight, flexible composition, cost-effective manufacturing processes, and potential for large-scale deployment. Unlike their silicon-based counterparts, which rely on inorganic materials, OSCs harness organic molecules or polymers to convert sunlight into electricity. Their adaptability in design and production is a key strength, facilitated by the ease with which organic materials can be synthesized and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 1, 2024 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article