Search
522 articles for “tensile property”
-
AI-Driven Optimization of Biopolymer Composite Formulations Using IoT Data Streams
Abstract: Biodegradable polymer composites have emerged as a sustainable alternative to petroleum-based materials in packaging, biomedical, and structural applications. However, traditional formulation techniques for reinforced polymer composites often lack precision and fail to adapt to real-time variations during processing, resulting in suboptimal material performance. This research proposes a real-time AI-IoT-enabled framework to optimize biopolymer composite formulations. The goal is to intelligently tune composite properties such as mechanical strength, moisture resistance, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 85–100 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
Deep Cryogenic Treatment of Copper Chill Plates in Stir Casting of Al6061-Silicon Carbide Composites
Abstract: Aluminum-Silicon Carbide Metal Matrix Composites (Al/SiC MMCs) represent advanced materials created through the integration of aluminum matrices with silicon carbide particle reinforcement. These composites demonstrate superior characteristics compared to conventional aluminum alloys, establishing their relevance across diverse engineering applications. This experimental investigation focuses on developing composites using aluminum as the base matrix while incorporating SiC particles (40-50μm particle size) as reinforcing agents. The reinforcement content was systematically varied from 3 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 116–126 Read article
-
Mechanical Characterization of Al6061 Hybrid Composites Reinforced with Boron Carbide and Fly Ash via Stir Casting
Abstract: The growing demand for lightweight, cost-effective, and high-performance materials in structural and automotive sectors has accelerated the development of hybrid metal matrix composites (HMMCs). This study investigates Al6061 alloy as the matrix material, reinforced with varying weight fractions of boron carbide (B₄C), a high-hardness ceramic, and fly ash, an economical industrial byproduct, to assess their synergistic effects on mechanical properties. Hybrid composites were synthesized using the stir casting technique to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1711–1719 Read article
-
Data-Driven Material Design and Performance Improvement: Constructing Sustainable Polymer Nanocomposites Using Deep Learning
Abstract: In the formation of sustainable polymer nanocomposites, the effective material techniques are required to balance the mechanical qualities, environmental compatibility and processing efficiency. The optimization of polymer matrix, nanofiller loading, processing conditions and material properties is typically time consuming, resource intensive and highly dependent on trial-error methodology using standard experimental techniques. The present work provides a data-driven approach that combines deep learning with sustainable polymer nanocomposite design for predicting and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
Investigation of Mechanical Characteristics of 3D Printed Composite Materials (Poly Ethylene Terephthalate Glycol and Nylon PA6)
Abstract: It has been widely employed in various industries, including the biomedical, manufacturing, aerospace, car, industrial, and building sectors. In order to gather information on various printing temperatures and rates, the composite's goal is to describe the nylon and polyethylene terephthalate glycol (PETG) materials of FDM under loading circumstances (tension, compression, and bending). According to the findings, PETG and nylon both demonstrate a clear tensile and compression asymmetry. Higher printing temperatures …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 77–88 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Assessing Concrete Strength Through Substituting Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: This study investigates the strength characteristics of concrete by partially replacing cement with bentonite powder and coarse aggregate with steel slag. The research aims to evaluate the mechanical performance of concrete through compressive strength, split tensile strength, and flexural strength tests. Bentonite powder is substituted at varying levels of 0, 10, 20, and 30%, while steel slag is incorporated consistently at 60% as a replacement for coarse aggregate. The objective …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 1–8 Read article
-
Experimental Evaluations of the Tensile and Impact Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers
Abstract: In marine engineering design, polymeric composites reinforced with natural fibers are frequently used. Through hybridization, natural fiber plastic composites' mechanical properties can be improved. Assessing the performance of recycled newspaper fiber (rNF) and rNF/glass fiber (GF) hybrid polypropylene composites is the aim of the current experiment. Using maleic anhydride (MA) as a coupling agent, the effects of GF loading on the impact strength and tensile behavior of composite materials with …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 30–39 Read article
-
Mechanical Properties of Geopolymer Concrete Paver Block
Abstract: Geopolymer concrete (GPC) is an innovative material and a real alternative to conventional Portland cement concrete. It relies on minimally processed natural materials or industrial by-products to significantly reduce its carbon footprint. However, the development of this material is still in its infancy, and a number of advancements are still needed. This paper focuses on the production of geopolymer concrete paver block (GPCPB) without using sodium hydroxide and investigates the …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 1, 2016 · pp. 51–55 Read article
-
Effect of Ni Addition on the Hardness and Tensile Strength of Al – Cu Alloy Prepared by Powder Metallurgy Technique
Abstract: Aluminium alloys are becoming potential engineering materials offering excellent combination of properties such as high specific strength, high specific stiffness, electrical and thermal conductivities, low coefficient of thermal expansion and wear resistance. Generally, copper and nickel were used as alloying elements in aluminium alloy to increase high temperature strength.Both powder metallurgy as well as casting techniques is used to produce Al-Cu-Ni alloys.However, P/M technique is better suited for preparing this …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 19–23 Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
Predicting flexural strength from alccofine and fly-ash as partial replacement of cement for high strength concrete
Abstract: Materials of different sourced has been applied by researchers to partially replace cement, this has been producing commendable results, the intension of these studies are to reduce waste generation from some of this materials and reduced cost, most of this material are sourced locally, this implies that it will be economical for construction engineers as this concept are achieving tremendous results, the study is to monitor flexural strength from Alccofine …
Published in Recent Trends in Civil Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 40–64 Read article
-
Advance green fiber reinforced thermosetting composites for reliable assistive device fabrication
Abstract: The biodegradable green fibers derived from natural plants are abundantly available and are currently considered as potential reinforcements. Present study aims at investigating the mechanical properties of green jute fiber reinforced thermoset composites as possible alternatives to the inorganic glass fiber reinforced prosthetic assistive device. Continuous green jute fiber are treated with sodium hydroxide and acetic acid, and then added to epoxy and polyester at varying fiber loadings to produce …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 1–8 Read article
-
An Experimental Study on The Effect of Geopolymeric Composite Reinforcement on Soil Subgrade for Flexible Pavements
Abstract: The use of geo-synthetics, such as geotextiles, has the potential to enhance the inherent engineering and geotechnical properties of subgrade soils that exhibit poor conditions. The use of geotextiles in pavement construction has many advantages, including enhanced subgrade strength and the ability to construct flexible pavements that are both efficient and cost-effective since it reduces the pavement thickness. In the realm of flexible pavement system development, the significance of subgrade …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 132–140 Read article
-
Advancing Pavement Durability and Sustainability through Glass Fiber Reinforced Concrete Technology
Abstract: This research evaluates the application of Glass Fiber Reinforced Concrete (GFRC) for improving road pavement durability and sustainability. The primary objective was to ascertain the optimal glass fiber content that enhances pavement performance while maintaining economic feasibility. To achieve this, experimental investigations compared the mechanical properties of GFRC to traditional Portland Cement Concrete (PCC). The experiments focused on key performance metrics such as tensile, compressive, and flexural strengths, with GFRC …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 760–774 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Investigating the Combined Effect of FDM 3D Printing Parameters on Tensile Behavior of ABS Plastic Using Taguchi Method.
Abstract: Fused Deposition Modelling (FDM) is a commonly utilized method in additive manufacturing. FDM is greatly affected by its printing parameters, which is why selecting the proper parameters is crucial for obtaining the desired properties of 3D printed parts. In this paper we have experimentally and statistically studied the influence of FDM 3D printing parameters (infill pattern, infill density and layer thickness) on tensile strength using Acrylonitrile Butadiene Styrene (ABS) filament. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 161–169 Read article
-
Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded AA6061-T6 Joints
Abstract: Friction stir welding is a solid state joining process capable of joining similar and dissimilar materials, initially developed for joining of aluminium alloys. In the present work, the effect of friction stir welding parameters on the microstructure and mechanical properties of aluminium joints is studied. An attempt has been made to investigate the weldability of Al6061-T6 alloy using high speed steel tool in friction stir welding machine. Dye penetration test …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 10–16 Read article