Search
491 articles for “surface properties”
-
Biosorption In Polymer Composites: Harnessing the Potential of Natural Materials for Enhanced Mechanical Properties and Efficient Medical Device Fabrication
Abstract: Biosorption is the process by which natural materials take in substances from their surroundings. It has gotten a lot of attention lately because it could be used in many different areas. One interesting way to use it is in polymer compounds, where adding natural materials can improve their dynamic qualities and make it easier to make medical devices. This article talks about how biosorption and polymer composites work together to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 06–21 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Tribological Study on SiC+Graphene Reinforced Al319 Composite andOptimization of Stir Casting Parameters
Abstract: The aluminium 319 (Al319) is a commonly used material for fabricating automobile components. Due to continuous friction and vibration, those components are subjected to significant wear. Therefore, it is necessary to improve the wear characteristics of this Al319. Hence, in this study Silicon Carbide (SiC) and Graphene nanoparticles (GNPs) are reinforce to Al319 via electro-magnetic stir casting method to optimize wear characteristics without its affecting mechanical properties. Various proposition of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 105–123 Read article
-
Machinability of Metal Matrix Composites using Wire Electric Discharge Machining: A Review
Abstract: Metal Matrix composites [MMCs] are increasingly being applied in the automotive and aerospace industries as high-performance substitutes for traditional materials. Due to these properties, namely, high strength-to-weight ratio, outstanding fracture toughness, and low density, a vast array of uses is feasible. We can control the properties of MMCs directionally as well, which makes them the perfect choice for military uses and marine and sports equipment. The machining of MMCs plays …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 303–311 Read article
-
Polymer Matrix-Based High-Performance Thermoplastic Composites for Automotive Applications: Design, Characterization, and Interface Behavior
Abstract: The study emphasizes the role of high-performance thermoplastic polymer matrices such as PEEK, PPS, and PA6, selected for their superior thermal stability, mechanical strength, and recyclability in automotive environments. The expanded usage of electric vehicles (EVs) and self-driving transportation creates a demand for advanced materials which are weight-conscious yet high in strength relative to their weight, impact-resistant yet still being environmentally friendly. This study aims to create and define fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 216–237 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Ce-TZP/Al2O3 Nanocomposites for Biomedical Implants
Abstract: Ceramic materials are widely used for biomedical applications because of their remarkable biological and mechanical properties. Titanium and titanium alloys are widely used for fabrication of dental implants. The foremost disadvantage of titanium is its dark greyish colour, negative delicate tissue states of the gingiva may prompt to compromised aesthetics. Anyway these days Zirconia implants were brought into dental implantology as an option in contrast to titanium implants. Zirconia seems …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 1–6 Read article
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article
-
Nanowire Photodetectors and Applications: A Review Study
Abstract: The utilization of nanowires and nanowire structures as photodetectors is an arising research subject. Novel gadget structures incorporated in single nanowire gadgets are additionally being effectively contemplated and created. Here, general NW-PD ideas are investigated, along with a point-by-point depiction of the actual phenomenon happening in nanowire photoconductors & phototransistors. Low dimensional frameworks like nanotubes and nanowires have intriguing, and technologically valuable, optical and electrical properties. Studies on these frameworks …
Published in Journal of Semiconductor Devices and Circuits · Vol. 10, Issue 2, 2024 · pp. 15–19 Read article
-
New Insight into the Composition and Structure of Sizing Agent from NMR Spectroscopy
Abstract: Sized carbon fibers (CFs) are of commercial significance as they form the main load-bearing component in advanced materials, namely, carbon fiber-reinforced plastics (CFRPs). Much of the knowledge of sizing composition and the process of sizing is a subject of intellectual property rights owing to its commercial relevance. In this original research article, deeper insights into the structure and composition of the sizing agent used for the surface modification of commercial …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 06–23 Read article
-
Development of PU/Graphene Anticorrosion/antifriction coatings
Abstract: Corrosion inhibition and reduction of frictional wear is a necessary requirement in launch vehicles. Organic coating proves to be the cheapest and most advantageous owing to its high mechanical resistance and high adhesion, better chemical stability, low permeability for corrosive components etc. Among the organic coatings reported, Polyurethane is found to be the most suitable candidate it being relatively durable, softer and more elastic than other organic coatings. However, graphene …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 45–56 Read article
-
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by solution casting. The resulting films were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), vibrating-sample magnetometry (VSM), thermogravimetric analysis (TGA), and tensile testing. XRD showed the characteristic cubic spinel reflections …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Innovative Porcelain Insulators: Prolonged Durability and Anti-Contamination Efficiency via Nano-TiO2 Photocatalyst Integration
Abstract: Porcelain has long been a critical material in high-voltage electrical insulation due to its exceptional mechanical, thermal, and dielectric properties. However, environmental contamination and material degradation over time pose significant challenges to its durability. This study investigates the integration of nano-sized titanium dioxide (TiO2) photocatalyst coatings on porcelain insulators to enhance their performance and prolong their operational lifespan. Local clay compositions were analyzed, and a comparative study of untreated and …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 18–23 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Metamaterial-Based Thermal Shielding Structures for Reusable Hypersonic Space Transportation Systems
Abstract: The rapid development of reusable hypersonic space transportation systems has intensified the need for advanced thermal protection technologies capable of withstanding extreme aerodynamic heating conditions encountered during atmospheric re-entry and sustained hypersonic flight. Conventional thermal shielding materials often suffer from high structural weight, limited adaptability, thermal fatigue, and degradation under repeated thermal cycling. This study proposes a novel Metamaterial-Based Thermal Shielding Structure for Reusable Hypersonic Space Transportation Systems, integrating engineered …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Optimization of Drilling Parameters on Hemp-Pineapple Hybrid Natural Fiber Composites
Abstract: Composites are tailor made heterogeneous materials to meet desired mechanical properties for intended applications. Among all the composites, fiber reinforced composites gained wide attention because of ease in synthesis and light weight. Issues such as delamination and surface finish during drilling of composites offers challenges. The present investigation uses design of experimentation method for setting processing parameters such as drill diameter, feed, rotation speed for evaluation of minimum surface roughness …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 33–39 Read article
-
Synthesis of Zinc Oxide Nanoparticles Through Polymeric Precursor Route and their Integration into Functional Nanocomposites
Abstract: A polymer precursor approach for creating zinc oxide (ZnO) nanoparticles with regulated size and shape is described in this work. By stabilising and capping particles, the polymer-assisted pathway efficiently reduces particle agglomeration while facilitating controlled nucleation and growth. The surface shape and dispersion of the produced ZnO nanoparticles were assessed using the scanning electron microscopy (SEM). When compared to traditional synthesis techniques, the addition of polymer greatly enhanced surface homogeneity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 883–890 Read article
-
Effect of Electrochemically Synthesized Zno/CoO Nanocomposites on Optical, Electrical and Viscosity Properties of Polyvinyl Alcohol Films
Abstract: AbstractZnO/CoO nanocomposites doped poly vinyl alcohol films were prepared by casting method using water as a solvent. X-ray diffraction, IR spectroscopy UV-visible spectroscopy, and scanning electron microscopy techniques were used to characterize the synthesized nanocomposite films. Study of the structural changes and complexation of nanoparticles with polymer matrix were performed using X-ray and IR techniques. Optical characterization studies revealed a blue shift in the absorption edge with increasing nanoparticle concentration …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 52–62 Read article
-
An overview of dissimilar metals welding by cold metal transfer technique
Abstract: Cold Metal Transfer (CMT) welding has emerged as a promising technique for joining dissimilar materials, offering enhanced weld quality and mechanical properties. This review article explores the application of CMT welding in joining different metal alloys, focusing on two significant cases: magnesium-aluminium and aluminium-stainless steel combinations. CMT welding minimizes intermetallic compound formation and produces high-strength joints in magnesium-aluminium combinations. CMT welding with a friction-surfaced aluminum coating offers strong metallurgical bonding …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 167–174 Read article