Search
1362 articles for “performance testing”
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Polymer Encapsulants for Photovoltaic Modules: Electrical Insulation Performance and Long-Term Durability under Accelerated UV Exposure
Abstract: Influence on the reliability and service life of PV modules is a major issue, which is influenced by the encapsulant degradation in long-term exposure to the sun's ultraviolet (UV) radiation. A systematic accelerated UV aging study of Ethylene Vinyl Acetate (EVA), Polyolefin Elastomer (POE), and Polyvinyl Butyral (PVB) films under IEC 61215-2:2021 specified test chamber conditions of Q-UV is conducted. The material properties were tested at various exposure intervals including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 384–408 Read article
-
Effect of Particle Size of Sand on the Interface Shear Behavior of Sand and Non-woven Geotextile
Abstract: Soil-geosynthetic interface is the weakest zone for shear failure. It is influenced by size, shape, density and water content of sand. It is also influenced by the properties of geosynthetic such as texture and structure. This paper explores the influence of the size of sand on the behavior of sand-geotextile interface. Three types of sands namely coarse, medium and fine sand and non-woven geotextile were used in this study. Several …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 4, 2021 · pp. 44–54 Read article
-
Effect of Particle Size of Sand on the Interface Shear Behavior of Sand and Non-Woven Geotextile
Abstract: Soil-geosynthetic interface is the weakest zone for shear failure. It is influenced by size, shape, density and water content of sand. It is also influenced by the properties of geosynthetic such as texture and structure. This paper explores the influence of the size of sand on the behavior of sand-geotextile interface. Three types of sands namely coarse, medium and fine sand and non-woven geotextile were used in this study. Several …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 44–54 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Diagnosis of Dengue by NS1 Detection: Comparison of Rapid Immunochromatography versus ELISA Kits
Abstract: Dengue is an acute infectious disease of viral etiology. It is probably one of the most important arthropod borne viral disease in terms of human morbidity and mortality. The spectrum of disease ranges from self-limited dengue fever to more severe forms of dengue hemorrhagic fever (DHF) or dengue shock syndrome (DSS). So, to reduce mortality and morbidity early and accurate diagnosis of dengue is essential. Study assessed comparison of currently …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 6, Issue 2, 2016 · pp. 18–22 Read article
-
Effect of Silica Fume in High-performance Selfcompacting Concrete with Conplast SP430
Abstract: Concrete is a construction material used worldwide since ages. Self-compacting concrete is that type of concrete which is firstly being developed in Japan in early 1990s and is capable to flow under its own weight and completely fill the formwork, without vibration effect, and cohesive enough to be handled without segregation and bleeding. Self-compacting concrete is known to be new class of high-performance concrete which is used to facilitate and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 11, Issue 2, 2021 · pp. 12–18 Read article
-
Formulation and Evaluation of Herbal Hair Gel
Abstract: India is renowned for its traditional medical practices, such as ayurveda, yoga, Unani, and siddha. The use of herbal plants and their cosmetic preparations to improve human appearance is gaining popularity globally due to their effectiveness, quality and safety. This study aimed to create an herbal hair gel that promotes not only hair growth and health but also offers effective styling. The gel was made by combing ingredients known for …
Published in Research & Reviews : Journal of Herbal Science · Vol. 13, Issue 3, 2024 · pp. 1–9 Read article
-
Mechanical Properties of High Performance Glass Fibre Reinforced Concrete with Super Plasticizer
Abstract: High performance concrete (HPC) has been used in various structures all over the world since last two decades. Glass Fibre Reinforced Concrete (GFRC) is a relatively new type of building material and it is being increasingly used in different countries. Glass-fibre reinforced concrete (GRC) is a material made of a cementitious matrix composed of cement, sand, water and admixtures, in which short length glass fibres are dispersed. The usage of …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 11–16 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Evaluating the Optimal Alccofine-1203 Replacement Ratio in M20 Grade Concrete
Abstract: The primary objective of this research is to investigate the potential of partially replacing cement with Alccofine 1203 in M20 grade control concrete and to evaluate the resulting effects on the mechanical properties of the concrete. Alccofine 1203, a high-performance mineral admixture known for its ultrafine particle size and high reactivity, was used as a partial cement substitute at varying replacement levels of 5%, 10%, and 15% by weight of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 294–299 Read article
-
An Abnormal Expression Detection System (AEDS) Using Deep Learning Algorithms
Abstract: In the last decade, many deep learning algorithms have achieved remarkable success and gained popularity in various computer vision tasks, including object detection, image recognition, and segmentation. This AEDS (Abnormal Expression Detection System)leverages the power of deep learning algorithms to detect abnormal facial expressions in real-time automatically. AEDS proposed two important models; those are Deep CNN and RNN. CNN is responsible for learning discriminative features from facial images and capturing …
Published in Journal of Computer Technology & Applications · Vol. 14, Issue 2, 2023 · pp. 72–79 Read article
-
Embedded Real Time Operating Systems Performance Analysis for ARM7 Platform
Abstract: An embedded RTOS is a software part of an embedded system that is used in the almost all the real-time application development process. It has a considerable effect on the reliability, robustness and performance of system under design and test. This paper addresses the concern of parameterized performance characteristics of two different RTOSs i.e. μC/OS-II and FreeRTOS ported on same common controller platform from ARM7TDMI family. Different OS services are …
Published in Current Trends in Signal Processing · Vol. 4, Issue 2, 2014 · pp. 24–29 Read article
-
In vitro Anthelmintic and Antibacterial Potentialities of Methanol Extract from the Leaf and Bark of Lawsonia inermis Linn. (Family: Lythraceae)
Abstract: Due to the availability of the genus Lawsonia in Bangladesh, the present study was aim to investigate the phytochemical screening, anthelmintic and antimicrobial potentialities of methanol extract from the leaf and bark of Lawsonia inermis L. The phytochemical screening was performed by chemical group tests for both the extract which indicate the presence of several chemical groups including steroids, alkaloids, flavanoids, tannins and saponins. The anthelmintic activity was performed by …
Published in Research & Reviews : Journal of Botany · Vol. 4, Issue 2, 2015 · pp. 1–5 Read article
-
Engine Performance Analysis of Cottonseed Based Biodiesel Using Design Expert Statistical Based Tool
Abstract: Biodiesel is a biofuel acquired by substance forms from vegetable oils or creature fats and liquor that can be utilized in diesel engines alone or mixed with diesel oil. It is characterized as the mono-alkyl esters of unsaturated fats got from vegetable oils or creature fats. In basic words biodiesel is the item that gotten when vegetable oil or creature fat is artificially responded with a liquor to deliver unsaturated …
Published in International Journal of Industrial and Product Design Engineering · Vol. 1, Issue 1, 2023 · pp. 1–5 Read article
-
Dimensionality Reduction using Eigenfaces and Fisherfaces for Face Recognition Applications using Kernel LMS Algorithm
Abstract: AbstractFace recognition is an intricate numerical technology in computer systems that can support recognition of human faces using methods such as principal component analysis (PCA), linear discriminant analysis (LDA), etc. by comparing the given facial uniqueness with the already available face database. PCA and LDA are classical feature extraction and data representation techniques used in face recognition algorithm involving unsupervised statistical methods. The 2-D facial image can be transformed into …
Published in Journal of Computer Technology & Applications · Vol. 6, Issue 2, 2015 · pp. 29–55 Read article
-
Linseed Released Varieties Adaptation Trial at Sidama and Hadya Zones of Ethiopia
Abstract: Among oil crops, linseed is the third important commodity next to sesame (Sesamumindicum L.) and noug (Guizotiaabyssinica Cass.) in Ethiopia. Testing the adaptability of a variety over diverse environments is commonly evaluated by the degree of its interaction with different environments in which it is grown. An evaluation experiment was conducted in three districts, namely, Bule (Gedeo zone), Dara (Sidama zone) and Hosanna (Hadiya zone), Southern Ethiopia, during 2018 and …
Published in Research and Reviews : Journal of Crop science and Technology · Vol. 9, Issue 3, 2020 · pp. 10–14 Read article
-
Heart Disease AI-based Prediction: A Comparative Analysis
Abstract: The present investigation looks at how well various machine learning algorithms predict cardiac disease. Since heart disease is one of the major causes of death worldwide, early detection and precise diagnosis are essential for managing and treating the condition. Our goal is to enhance diagnostic processes and improve patient outcomes by leveraging machine learning techniques. Six widely-used machine learning algorithms are evaluated in this research paper. These algorithms were selected …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 21–29 Read article
-
Drawbacks of the Water Monitoring System
Abstract: Water quality stands as a paramount determinant influencing human existence. Purity tests for the water must often be performed immediately. There will need to be testing at multiple locations if the area to be studied is large. If the geographical area under consideration is extensive or large, testing will need to take place at multiple locations within that area. Continual assessments of the water's quality will be difficult and time-consuming. …
Published in Journal of Water Pollution & Purification Research · Vol. 10, Issue 1, 2023 · pp. 14–21 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article