Search
318 articles for “Nano composites”
-
Effect of Aging on the Performance of Polymer Composite: A Review
Abstract: The exceptional robustness, corrosion resistance, and lightweight design, polymer composites (PCs) are crucial to modern engineering escalating the utilization of polymer composite in structural applications including aerospace engineering, automobile engineering, etc. With a greater number of positive aspects, the polymer composite also deteriorate by different environment conditions with their exposing duration considered as aging of polymer composites. However, a variety of elements influencing the ageing process determine their long-term performance. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 752–768 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
Nanoelectronics Based on Carbon Nanotubes
Abstract: Nanoelectronics, the study and application of electronic components and systems at the nanometer scale, plays a pivotal role in advancing modern technology toward faster, smaller, and more energy-efficient devices. Among the various nanomaterials explored for these applications, carbon nanotubes (CNTs) have emerged as one of the most promising candidates due to their exceptional electrical conductivity, mechanical strength, and thermal stability. This project report presents an in-depth exploration of the role …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 3, 2025 · pp. 40–53 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
High-Velocity Impact Response of CFRP and Hybrid Composites: A Comprehensive Review on Ballistic Resistance and Damage Mechanisms
Abstract: This review consolidates recent advances in the study of high-velocity impact response of carbon fiber reinforced polymer and hybrid composites. Carbon fiber reinforced polymer composites are widely applied in aerospace, automotive, and defense due to their high strength-to-weight ratio, stiffness, and durability. However, their susceptibility to impact damage such as delamination, matrix cracking, and fiber breakage limits their performance under dynamic loading. To overcome these challenges, researchers have explored reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 100–122 Read article
-
Wear Attribute of Aluminium Metal Matrix Composite Reinforced With MWCNT, Produced By FSP, On A Vertical Milling Machine
Abstract: The exceptional properties of Aluminium metal matrix composites (AMMCs) like good hardness, specific strength, enhanced wear rate made huge demand in the automobile and aerospace industries. The classical methods of manufacturing AMMCs leave problems at the interface of matrix and reinforcement segregation, like an agglomeration of reinforcements, wettability etc. To overcome this, an alternate, innovative method of fabricating aluminium matrix surface composites has been invented, which is termed friction stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 525–539 Read article
-
Structural, Electrical and Optical Properties of RGO-Incorporated PVA Nanocomposites for UV Shielding Applications
Abstract: Polymer matrix-based nanocomposites reinforced with appropriate nanoparticles have the potential to exhibit improved electrical, optical and mechanical properties, as well as improved UV-shielding capabilities. These materials are currently being utilised for various commercial applications, such as window shields and automotive components. We prepared reduced graphene oxide (rGO)-incorporated polyvinyl alcohol (PVA) polymer nanocomposites employing a solution casting method. XRD and SEM results confirmed that the rGO nanosheets were dispersed well in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 119–137 Read article
-
Structural, Optical, Surface and Gas-Sensing Properties of rGO/Sn1-xZnxO₂ Nanocomposites
Abstract: rGO/Sn₁₋ₓZnₓO₂ nanocomposites with x = 0.00–0.75 were synthesized by sol–gel auto-combustion followed by wet impregnation with reduced graphene oxide. The adopted synthesis route enabled homogeneous Zn incorporation into the SnO₂ matrix and uniform distribution of rGO, leading to improved structural integrity and interfacial contact between the two components. XRD confirmed a dominant tetragonal cassiterite SnO₂ structure, while FTIR, FESEM, EDS, UV–visible, and BET analyses verified oxide–rGO coupling, Zn-dependent structural modification, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Biopolymer-Based 3D Composite Scaffolds for Bone Tissue Engineering: Photothermal-Responsive Systems with Controlled Pt (IV) Prodrug Release
Abstract: Biopolymer-based composite scaffolds have attracted significant attention as multifunctional platforms at the intersection of polymer science, regenerative medicine, and cancer nanotherapy. In this study, a dual-functional scaffold was developed for simultaneous osteosarcoma treatment and bone regeneration using poly (L-lactic acid) (PLLA) reinforced with bioactive glass (BG) and integrated with a glutathione-responsive platinum (IV) prodrug system (PDA@Pt). To improve interfacial adhesion, photothermal conversion efficiency, and tumor-specific activation, the Pt (IV) prodrug …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 351–361 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Interfacial and Tribo-Mechanical Performance of a TiO₂–Castor Oil Polymeric Nanofluid During Sustainable Machining of AISI 316L Stainless Steel Under MQL Conditions
Abstract: This research examines the tribo-mechanical performance and interfacial film characteristics of a TiO₂-reinforced castor-oil polymeric nanofluid during the turning of AISI 316L stainless steel under minimum-quantity lubrication (MQL). A Taguchi L9 orthogonal array was utilized to assess the synergistic effects of cutting speed, depth of cut, and coolant composition on surface integrity, while machining experiments were performed under dry, conventional, and TiO₂-nanofluid lubrication techniques. ANOVA and multiple-regression modeling were used …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 901–914 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Advances in Membrane Technology: A Comprehensive Review of Materials, Processes, and Applications
Abstract: Membrane technology has become a critical platform for sustainable separation processes across water treatment, energy generation, chemical processing, and healthcare. Over recent decades, advances in materials, fabrication methods, and process design have dramatically expanded the performance, efficiency, and applications of membrane-based systems. Polymeric membranes dominate the industry due to cost-effectiveness and scalability, while ceramic, metallic, and composite membranes offer enhanced thermal and chemical resistance for specialized environments. Nanostructured and bio-inspired …
Published in International Journal of Membranes · Vol. 2, Issue 2, 2025 · pp. 1–6 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Polymer Nanocomposites: Cutting-Edge Material for The Aviation Sector
Abstract: Due to current market demands and a need to produce structural materials for use in both military and civilian aircraft more efficiently, the aerospace industry is always pushing for higher productivity. The design and manufacturing of aeronautical components in the present and the future are heavily reliant on materials of the polymer composite class. The building of many airplane components uses polymer composites, which are generally helpful. Based on their …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 227–234 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article
-
Comparative Analysis of 3D-Printed and Molded Shape-Stabilized Phase Change Composites
Abstract: Thermal energy storage (TES) has become essential for efficiently storing and utilizing thermal energy across applications like industrial heating, power plants, batteries, medical devices, food preservation, and aerospace technology. Because of their high energy density, affordability, and environmental friendliness, phase change materials, or PCMs, are employed extensively. However, challenges like poor thermal conductivity and leakage limit their performance. To address these issues, 3D printing has emerged as a powerful tool …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 184–192 Read article
-
Iron Oxide/Chitosan Nanocomposite: Properties and Design for AI Enhanced Immunotherapy and Regenerative Medicine
Abstract: Biopolymers are valuable complex materials. They attract attentions of many scientists, engineers, and medical professionals’ due to their distinguished properties for various applications. In this research, emphasis is given to Fe3O4/Chitosan nanocomposite which has desirable biophysical properties compared to pure Chitosan nanoparticles. Following the green synthesis procedures and characterization methods including thermo gravimetric analysis, AI assisted biomedical application of; Fe3O4/Chitosan nanocomposite is presented. The effect of alkali typically, KOH, in …
Published in International Journal of Cheminformatics · Vol. 3, Issue 2, 2025 · pp. 22–32 Read article
-
Advanced Coating Techniques: Improving Metal Longevity through Nanocomposite Applications
Abstract: In order to protect metal and lessen wear and tear, this topic has scriptive issues pertaining to coatings that are applied to metal surfaces. Components in slurry pumps have better wear and abrasion resistance compared to their surface properties. An interface region has been used to separate at least two immiscible phases in the material that makes up a nanocomposite coating. Fillers have become a major constituent of the matrix, …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 01–08 Read article
-
Effect of Functionalization on glass transition temperature of Carbon Fiber reinforced Epoxy Nanocomposites using MD Simulation
Abstract: As we all know that the mechanical characterization of any material plays a vital role in performance of the material throughout its life cycle. One of the major parameters in calculating the mechanical properties of carbon fiber reinforced nanocomposite is glass temperature. Understanding glass transition behaviour of polymer nanocomposites are crucial for optimizing their mechanical properties and performance. We used “Molecular dynamics simulations” to calculate sequel functionalization effect on glass …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 1–8 Read article