Search
1192 articles for “MnCl2.4H2O salt reinforcement”
Nothing matched all of your words, so these match any of them.
-
Deep Reinforcement Learning-Based Intelligent Energy Management Strategy for Battery–Supercapacitor Hybrid Energy Storage Systems in Electric Vehicles
Abstract: As the number of EVs increases, smart solutions for energy management are needed that will optimize energy use, prolong battery life and boost vehicle performance. The application of conventional rule based and optimization-based Energy Management Strategies (EMS) for Battery–Supercapacitor Hybrid Energy Storage Systems (HESS) often leads to sub-optimal power management, supercapacitor mismatch and battery degradation when subjected to varying driving conditions. This study aims to design an intelligent energy management …
Published in International Journal of Advanced Control and System Engineering · Vol. 4, Issue 2, 2026 Read article
-
Physical and Mechanical Characterization of Boron carbide(B4C) and waste granite dust reinforced hybrid aluminium composite.
Abstract: In this particular study the concussion of B4C and waste granite dust reinforced on AA6082-T651 hybrid aluminium matrix composite (AMCs)which was fabricated using the stir casting process was investigated.These reinforcements were mixed and varied in the ratio of 1:0,0:1,1:1,1:3,3:1 respectively in the aluminium metal matrix composite .The physical and mechanical characterization of these AMCs were investigated.The obtained results indicate that the density of the composite XCM-5 increased by increasing the …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 17–26 Read article
-
Performance based seismic design of reinforced concrete asymmetrical building
Abstract: The nonlinear static analysis of asymmetrical G+20 reinforced concrete building is carried out using design tool. Nowadays, in most of the RCC framed buildings irregularities are commonly observed. Buildings needing simple regular geometry suffer much less damage than buildings with irregular configuration. The poor performance and structural damages in an irregular building type of structures during the frequent earthquakes increased the need to determine and evaluate the damages in the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 29–36 Read article
-
Finite Element Analysis and Validation of Axial Capacity of RC Columns Made of Steel Fiber Reinforced Concrete (SFRC)
Abstract: Steel Fiber Reinforced Concrete (SFRC) possesses many excellent dynamic performances such as; high resistance to explosion and penetration. It has little effect on pre-cracking behavior in uniaxial compression, but substantially enhances its post cracking response. This response leads to a greatly improved ductility and toughness. Steel fibers in SFRC are capable of preventing crack propagation as well as brittle failure of columns under uniaxial compression. To this end, four reinforced …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 2, 2015 · pp. 9–14 Read article
-
Water Permeability of Hybrid Steel Fiber Reinforced Concrete
Abstract: Results of an investigation conducted to study the water permeability of (HySFRC) are presented. Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations corresponding to 0.5, 1.0 and 1.5% fiber volume fractions. A reference concrete mix containing no fibers was also cast for comparison purpose. A total number …
Published in Journal of Construction Engineering, Technology & Management · Vol. 4, Issue 2, 2014 · pp. 30–37 Read article
-
Experimental Investigation of Mechanical Properties of Hybrid Fiber (Basalt and Steel) Reinforced Concrete
Abstract: The paper reports experimental investigations on hybrid-reinforced concrete. The proportion of basalt fiber and steel fiber was 50% respectively of the total fiber taken as sample. Effect of fiber on various strengths of concrete is studied. Fiber content varied from 0 to 4% at an interval of 1% by weight of cement. Various considerations for investigation are compressive strength, flexural strength, split tensile and bond strength. Cube of size 150 …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 2, 2013 · pp. 5–10 Read article
-
Experimental Investigation on Hybrid Laminated Composites Reinforced with Basalt-Pineapple-Bamboo Fibers
Abstract: In the majority of technological applications, particularly in automotive and building materials, natural fibre-reinforced composites are now more common. Natural fibre developments have seen a tremendous rise in demand recently. As a filler material, Snail Shell Powder was utilized in the current work to evaluate the mechanical and thermal characteristics of hybrid reinforced composites constructed from natural fibres such as basalt, pineapple, and bamboo. Snail shell powder weighed six grams …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 3, 2023 · pp. 9–15 Read article
-
Investigations on Mechanical Properties of Al 8011 Reinforced with Micro B4C/Red Mud by Stir Casting Method
Abstract: Aluminium metal matrix composites are emerging as the most versatile material for unique automotive, aviation, aerospace, defense, marine applications and other structural applications due to their excellent mixture of properties. In the present investigation, a hybrid composite of Al8011 aluminium alloy reinforced with B4C and red mud was fabricated by stir casting method. Red mud is one of the major waste material extracted from the bauxite ore of alumina during …
Published in Journal of Electronic Design Technology · Vol. 7, Issue 1, 2016 · pp. 32–38 Read article
-
Soft Computing Based Prediction of Deviator Stress of Waste Plastic Reinforced Sand
Abstract: In the recent past, the soft computing techniques have received a significant attention for solution of the geotechnical stability problems. Following the trend, the present study tries to explore the use of different soft computing techniques such as random forest regression, support vector machines (SVM) RBF kernel, SVM poly kernel and M5P model tree for the prediction of deviator stress of sand reinforced with waste plastic strips. The deviator stress …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 3, 2019 · pp. 1–7 Read article
-
A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5%COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING SQUEEZE CASTING PROCESS
Abstract: Aim of the present investigation is to develop aluminium-4.5% copper alloy metal matrix composites by reinforcing with chopped alumina fibers in varying percentage like 10%, 20% and 30% and so on. The casting can be produced by using Squeeze casting process; these castings were studied for all its mechanical properties like tensile, hardness, wear and microstructure and corrosion analysis. It is observed that increase in reinforcement improves the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 22–31 Read article
-
Tensile and Impact Properties of Jute/Glass and Jute/Carbon Fiber Reinforced Polypropylene
Abstract: AbstractComposites have created a niche in the world market today as they provide a stiff, strong and lightweight material. Two types of composites polypropylene/jute/glass fiber and polypropylene/jute/carbon fibers were prepared by varying the percentages of jute, glass and carbon fibers, respectively. A proportion of 35:5, 30:10, 25:15 and 20:20 were maintained between jute and other reinforcing fiber (glass or carbon) in polypropylene matrix. Tensile and impact test specimens were prepared …
Published in Journal of Polymer & Composites · Vol. 4, Issue 3, 2016 · pp. 35–39 Read article
-
A Review on Hole Making in Carbon Fiber Reinforced Plastic Laminates
Abstract: AbstractThe existence of fiber reinforced plastic (FRP) laminates in the world since 1940s, and its application is till date growing continuously. The research papers published in this field focused on the manufacturing of laminates to its final uses. The FRPs can be manufactured by various processes, but its assembly of laminated product required a hole. Hole in laminate may be produced by means of conventional or unconventional machining. Major attention …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 44–51 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Potential of Midrib of Cocos nucifera Leaf for Reinforcement of Plastics
Abstract: AbstractCoconut palm (Cocos nucifera) is an abundant crop of tropical areas. In the present work, mechanical properties of midrib of coconut palm leaf as tensile strength, tensile modulus, flexural strength, flexural modulus impact strength and elongation at break is experimentally determined and compared with other fibers. Single-fiber pull-out test is conducted to determine critical embedded length and interfacial adhesion between fiber and matrix for reinforcement in polyester resin. Tensile test …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 25–32 Read article
-
Taguchi Analysis of the Thrust Force and Delamination in Drilling of Glass Fiber Reinforced Epoxy/Clay Nanocomposites
Abstract: AbstractComposites are replacing several materials due to their superior properties such as high strength to weight ratio, high stiffness to weight ratio, better impact characteristics, corrosion resistance and design flexibility. Drilling is often required to facilitate the assembly of the parts to get the final product. However, drilling induced damage affects the quality of the drilled components. The present investigation is an attempt to study the effect of the cutting …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 14–23 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Fabrication and Characterization of Magnesium Matrix Nanocomposites Reinforced with Multiwall Carbon Nanotubes
Abstract: Multiwall Carbon Nanotubes (MWCNTs)-reinforced magnesium nanocomposites were fabricated through powder metallurgy route and then hot extruded as secondary process. CNTs were added by 0.5, 1 and 1.5 wt% with magnesium powders and ball milled to obtain a homogeneous mixture. The effect on mechanical properties of Mg nanocomposites due to the reinforcement of MWCNTs was investigated. The effect of mixing through high-energy ball milling, sintering temperature and extrusion process on the …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 17–21 Read article
-
Studies on Mechanical Properties of Ultra High Molecular Weight Poly Ethylene (UHMWPE)-Basalt Fiber Reinforced Hybrid Polymer Matrix Composites
Abstract: Composite materials have become a preferred material now days because of their strength and also they are light. An additional material can be produced by a combination of matrix and reinforcement. The connections also give the flexibility of the design, because many of them can be formed in complex shapes. The economic significance of composite materials is now illustrious. There is strong indication far and wide that this importance will …
Published in Journal of Polymer & Composites · Vol. 7, Issue 3, 2019 · pp. 8–19 Read article
-
Nanoparticle Reinforced Base Material Thermal Properties Using Numerical Model: A Review Paper
Abstract: Present paper deals with the review of the analysis of base materials thermal properties. Nanoparticles are reinforced into the base material to analyse their thermal properties using different numerical models. Mixture rule and Maxwell model are considered to analyse the thermal properties of Al6061/Al7075 base material thermal properties reinforced with silicon carbide, aluminium oxide and copper nanoparticles. From the analysis, it has been found that addition of the nanoparticles into …
Published in Journal of Production Research & Management · Vol. 9, Issue 2, 2019 · pp. 9–11 Read article
-
Optimization of Surface Roughness in Cylindrical Traverse Cut Grinding of Glass Fibre Reinforced Epoxy Composite
Abstract: Glass fibre reinforced plastic materials are increasingly used in many engineering applications. Making these materials with high level of dimensional accuracy and fine finish has increased enormously. Present work is planned to investigate the effects of grinding parameters infeed, longitudinal feed and work speed on surface roughness in traverse cut cylindrical grinding of glass fibre reinforced epoxy composite. Box-Behnken experimental design has been used to conduct the experimental runs. Analysis …
Published in Journal of Production Research & Management · Vol. 10, Issue 3, 2020 · pp. 27–33 Read article