Search
450 articles for “optimum”
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
Representation-Theoretic Symmetry Reduction and Fuzzy-Grey Optimization of Modular Vibration Systems
Abstract: This paper presents a representation-theoretic framework for symmetry-aware vibration control in modular structural systems. Exploiting cyclic symmetry, the mass, damping, and stiffness operators are block-diagonalised into irreducible representations, reducing the full structural dynamics to a collection of lower-dimensional modal subsystems. This decomposition provides both computational efficiency and a rigorous mathematical description of symmetry-preserving dynamic behaviour. To account for imperfections arising in practical implementations, near-symmetry defects in stiffness and damping are …
Published in Emerging Trends in Symmetry · Vol. 2, Issue 1, 2026 · pp. 22–30 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1308–1322 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 367–385 Read article
-
Tri-Band Edge-Cut Rectangular Microstrip Patch Antenna on Composite Substrate for RF Energy Harvesting in IoT Networks
Abstract: The increasing use of Internet of Things devices underscores the pressing need for sustainable energy solutions, since traditional batteries necessitate regular replacement and constrain scalability. Radio frequency energy harvesting is a viable option; nonetheless, antenna design continues to provide a significant problem owing to the requirements for compactness, efficiency, and multi-band functionality. A hybrid composite substrate configuration combining FR4 (εr = 4.3) and RT Duroid (εr = 2.2) is employed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–883 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 212–226 Read article
-
Cooling test's impact on photovoltaic solar panel systems
Abstract: Temperature changes have a massive effect on the performance of photovoltaic (PV) solar panels that are currently extensively used for the conversion of solar power into electrical energy. The output of solar systems is limited, especially in hot climates, as heating of the panel causes output voltage and efficiency to drop. The paper explores the effects of cooling on the quality and performance of photovoltaic (PV) solar panels. In this …
Published in International Journal of Electronics Automation · Vol. 4, Issue 2, 2026 Read article
-
Thermodynamic Analysis of Cascaded Organic Rankine Cycle for Optimizing Thermal Efficiency
Abstract: AbstractPower cycles converting medium temperature heat (~300°C) into electricity using working fluids like toluene, benzene etc. result in vacuum on condenser side operating near ambient temperatures. To overcome this, two stage cascaded power cycle is proposed with toluene in the top cycle and R- 245fa as a bottom cycle working fluid. In this scheme, condensation heat of toluene is used as a heat source for R- 245fa. A realistic analysis …
Published in Journal of Thermal Engineering and Applications · Vol. 5, Issue 3, 2018 · pp. 30–35 Read article
-
Analysis on Heat Recovery of an Engine Radiator using (CH2OH)2 Based Nanofluid Having TiO2 Nano Particles
Abstract: Automobile engine produces high amount of heat in the process of combustion. This internal heat rises the temperature of engine to very high level and can damage or seize the engine parts. Hence for the safety of engine components, it needs to run at much lower temperature, which is called engine working temperature. Ethylene glycol based nanofluids are used as the working fluids for the radiator and Titanium Dioxide, Silver, …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 10–23 Read article
-
Single Axis Solar Tracking System Using Arduino And 555 Timer IC
Abstract: This research focuses on the topic of development and advancement of single axis solar tracker with the help of Arduino UNO, which is cost efficient, less complex, and capable of achieving maximum efficiency and maximum output. In this research, light dependent resistors (LDR) are used to detect solar radiation and capture optimum light intensity. Servo motor is used to rotate the solar panel and to sense the maximum light intensity …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 8–15 Read article
-
Recent developments in Nano technology applications in direct absorbing solar collectors: A Review
Abstract: Solar energy harnessing is widely promoted amongst the nations so as to encourage environment conservation. Use of solar energy is very important in the context of global warming and decrease in carbon dioxide generations. Here it becomes important for the researchers to find new methods for optimum utilization of solar energy in collectors by design modifications thereby reducing heat losses along with considering the reductions in high initial costs. Addition …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 23–34 Read article
-
Genesis of English Language with its Cybernetics Origin
Abstract: AbstractThis paper is looking into the genesis of the English language with its Cybernetics origins and hence looking into the possibilities of developing new techniques to be used in speech processing applications. As we all know, English is the third-most-spoken language in the world by a number of native speakers, which is used to create the present world, which is also a West Germanic language that was first spoken early …
Published in Current Trends in Signal Processing · Vol. 10, Issue 1, 2020 · pp. 19–28 Read article
-
Failed Component Image Acquisition Quality Optimization for Machine Vision System
Abstract: AbstractWith the rapid development of the global semiconductor industry, electronic products are required to have new ideas, diversified functions, and thinness and shortness. The ball grid array (BGA) packaging technique arranges solder balls in a matrix mode on the bottom of the component substrate, so as to increase the functional density. The dye stain test is extensively used for array component failure analysis; however, the operation takes time and extends …
Published in Current Trends in Signal Processing · Vol. 10, Issue 2, 2020 · pp. 17–25 Read article
-
Computation of IIR Filter Coefficient using Genetic Algorithm
Abstract: In the proposed paper the filter coefficient of the infinite impulse response filter is estimated by using genetic algorithm. Genetic algorithm is a computational optimization technique which optimizes fitness function. The paper finds the optimum coefficient of the infinite impulse response filter and compares it to the filter coefficients obtained after conversion of analog filter into digital infinite impulse response filter. It is found that the coefficients obtained after genetic …
Published in Current Trends in Signal Processing · Vol. 5, Issue 2, 2015 · pp. 24–26 Read article
-
Comparative Study of Future Processor Design Models for Energy Efficiency
Abstract: This paper describes the comparative analysis of the conceived future many core processor models not only for optimum performance but having the efficient power consumption too. There is a need of the energy efficient parallel cores along with the high throughput and higher performance sequential core to have future competent processors to meet the demand of the Moore’s law. One can have homogeneous cores structure as well as heterogeneous cores …
Published in Current Trends in Signal Processing · Vol. 4, Issue 1, 2014 · pp. 1–3 Read article
-
Survey of Advanced Control Techniques for Active Power Filters in Grid Integration
Abstract: Active power filters (APFs) can increase power quality, dependability, and stability on power utilities by compensating for harmonic and reactive current components in power supplies. The performance and stability of active power filters are greatly enhanced by the control strategies used with them. When these two crucial elements start to compete, it is impossible to achieve both unity power factor (UPF) and flawless correction of current harmonics. A systematic review …
Published in Current Trends in Signal Processing · Vol. 13, Issue 3, 2023 · pp. 24–34 Read article
-
Development of bio-based foam from Ximenia americana seed oil polyol: Studies on the effect of toluene diisocyanate (TDI) on some properties of the foam
Abstract: Polyurethane foam is a very important and valuable industrial product. In this study, polyol synthesized from Ximenia americana seed oil was used in the production of bio-based polyurethane foam. Different amounts (2mL, 4mL, 6mL, 8mL and 10mL) of toluene diisocyanate (TDI) were used in the formulation of the foams, and the effect of the varied amount of TDI was investigated by studying the foams’ properties such as the density, tensile …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 1, 2019 · pp. 5–11 Read article
-
Recovery of Struvite from Java Plum Leaves
Abstract: AbstractBio-degradation and leaching of java plum leaves liberates phosphate and can be recovered as struvite. Quantity of P2O5 obtained recoverable is 0.3009 g of P2O5/kg of leaves. Concentration of NaOH, ammonia, Magnesium sulphate was varied in aliquot. Process optimum variables were 12 g of 1N NaOH, 15 ml liquor ammonia, 5 g of magnesium sulphate yields 9.398 g of P2O5/kg of leave.
Published in Emerging Trends in Chemical Engineering · Vol. 2, Issue 2, 2015 · pp. 5–14 Read article