Search
334 articles for “fiber reinforced composite”
-
Preparation and Characterization of a Novel Lignocellulosic Fiber from Calotropis gigantea Stem Fiber for Thermoplastic Composites
Abstract: In the current article, Calotropis gigantea fiber mat (CGM)/thermoplastic polypropylene (PP) strengthened non-woven unidirectional composites were successfully manufactured by hot compression molding using the film piling method. Micromechanical and physicomechanical properties such as tensile, flexural, compressive, impact properties, thickness, swelling, and water absorption of CGM/PP composites were evaluated for the effects of CGF composition, mercerization of CGF as well as the inclusion of two types of coupling agents (vinyltriethoxysilane and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 15–33 Read article
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Effect of Carbon Nanotube on Mechanical Properties of Jute Fibre Reinforced Polyester Composite
Abstract: The current study studies how carbon nanotubes affect the mechanical characteristics of polyester composites reinforced with jute fiber, both treated and unprocessed. Alkali was used to cure jute textiles. Composites with treated and untreated jute fibre with 5%, 10% and 15% jute fibre loading with and without carbon nanotube were prepared using hand lay-up process. Carbon nanotubes varied from 0.2%, 0.4% and 0.6%. Tensile, flexural, and strength of impact all …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 1–9 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Effects of Fiber Hybridization on Tensile, Flexural, and Impact Strength of Hybrid Natural Fiber Epoxy Composites
Abstract: This study investigates the mechanical performance of epoxy composites reinforced with hemp, ramie, and flax fibers and evaluates the effect of fiber hybridization. Single-fiber composites were fabricated using hand lay-up followed by vacuum-bagging consolidation and compared with three hybrid systems: hemp–flax (HF), hemp–ramie (HR), and flax–ramie (FR). Tensile, flexural, and drop-weight impact properties were evaluated using standardized test procedures. Among the single-fiber composites, flax exhibited the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 295–305 Read article
-
A Review of Modifications of Cement Slurry Formulations for Carbon Dioxide Storage
Abstract: Climate action, which includes activities aimed at mitigating climate change or reducing its adverse impacts, is the thirteenth goal of the 2030 SDGs (Sustainable Development Goals). Tthe successful commercial deployment of CCS technology would heavily rely on the integrity of the cement sheath used to complete the wellbores at the CO₂ storage sites. It has been established that the cement sheath made from conventional ordinary Portland cement (OPC) is not …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 1–21 Read article
-
Drilling Effect on Fiber Composites: A Review
Abstract: Composites laminates show immense mechanical properties like strength-to-weight ratio, damage tolerance, fatigue and corrosion resistance therefore conventional materials are replaced by composites in many areas such as automobile and aircraft structure. Machining of composites is very difficult than machining of a conventional material because composites are inhomogeneous and extremely abrasive. In production drilling is important machining process used to produce hole for riveted and bolted joint. There are many improvements …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 3, 2015 · pp. 42–50 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
A Systematic Review of Advanced Composite Materials for High-Performance Spur Gear Applications
Abstract: This is a review which provides specific and detailed information regarding the fiber-reinforced polymer (FRP) composite to replace traditional steel in high-performance spur gears with emphasis on mechanical performance, computational modeling, and experimental validation. Methods: The current literature was thoroughly investigated that includes material properties, material simulation (e.g., finite element analysis, FEA), and experimental gear testing procedures (e.g., DIN 51354, ASTM G99). Certain case studies in the aerospace and automotive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 209–220 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
A Review on Advances in Polymer Composites and Nanocomposites: Design, Applications, and Life Cycle Assessment
Abstract: Materials based on polymer composites and nanocomposites have won the main status in several regions of industry by mare possessing excellent properties and broad range of application. This review focuses on the advancements in the design of fiber-reinforced polymers, structural composites, multifunctional composites, and biomimetic and eco-friendly composites. Emerging developments in biomedical composites, polymer foams, and smart composites are explored, highlighting their applications in medical, aerospace, automotive, and structural engineering. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 244–251 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Strengthening of RC Structures Using CFRP-Near Surface Mounted Technique
Abstract: This study reviews the literature on fiber-reinforced polymers (FRP) and their applications in near-surface mounted (NSM) applications. Since fiber-reinforced polymer (FRP) composites outperform many conventional steel reinforcing methods in terms of quality, they are nearly entirely dependent on advanced concrete technology. Many structures that will still be in use two decades from now have already been constructed. A portion of these structures must undergo enhancements or be replaced, as they …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 304–313 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Design and Development of Fiber Sandwiched Composite Materials for the Improvement of Mechanical Properties
Abstract: This research paper presents the development and mechanical characterization of fiber sandwiched composite materials (FSCM) to address the increasing demand for high-strength, lightweight, and corrosion-resistant materials in advanced engineering sectors such as automotive, aerospace, and transportation industries. Traditional homogeneous materials such as metals, ceramics, and polymers often fail to provide a balanced combination of properties like high tensile strength, low density, toughness, abrasion resistance, and impact resistance needed for modern …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 22–37 Read article
-
Critical Review on Multifunctional Polymer Composites for Weight Reduction and AI Based Battery Thermal Management in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for advanced materials and intelligent control systems capable of improving energy efficiency, driving range, thermal safety, and overall vehicle sustainability. This paper presents a critical review of multifunctional polymer composites and artificial intelligence-based battery thermal management systems (AI-BTMS) for next-generation EV applications. Polymer composites reinforced with carbon fibers, graphene, boron nitride, nanoclays, and carbon nanotubes offer significant advantages over …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 603–619 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Tensile Capacity of Corroded Steel Section Strengthened Using Fiber Composite Wrap
Abstract: Strengthening and rehabilitation of structures is a major concern for researchers in the civil engineering community in recent years due to the aging of structures and the need for effective methods of strengthening. Many researches are being carried out on strengthening of reinforced concrete structures using fiber composite materials. A very few researches are being reported on strengthening of corroded steel members using fiber composite materials. Since corrosion is an …
Published in Journal of Construction Engineering, Technology & Management · Vol. 2, Issue 1-3, 2012 · pp. 54–65 Read article