Search
529 articles for “Thermally Developing”
-
Thermistor based ultra-sensitive thermal probe and its signal processing methods suitable for solution calorimeter
Abstract: A sensitive thermometric probe to measure a minute change in temperature of the order of mK, is designed and developed as a prerequisite for the in-house development of solution calorimetry system to study the heat of solutions of the compounds containing alkali metals. A measurement range of 2 K is considered in commensurate with the volume of the solution and the sample size. In this paper, construction of the probe …
Published in Journal of Instrumentation Technology & Innovations · Vol. 2, Issue 2, 2012 · pp. 23–31 Read article
-
Relative Study on the Behavior and Performance of Various Electrolyte Materials for Solid Oxide Fuel Cells
Abstract: Aim of the present study is to provide an insight of development of electrolyte material for solid oxide fuel cells (SOFCs) with principle emphasis on materials aspects. In recent years, the major interest is to reduce the working temperature of SOFC, so that, the problems like thermal instability, high chemical reactivity, high cost etc. can be minimized as well as life of a fuel cell can be increased with reduction …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 17, Issue 3, 2015 · pp. 33–39 Read article
-
Comparative Study on Design and Analysis of an Iron-Box Using Different Materials
Abstract: In this study, a steady-state thermal analysis of the soleplate is conducted using four different materials (Aluminium, Stainless Steel, Titanium, and Ceramics) using ANSYS Workbench. Also, it ensures that the design adheres to safety standards and promotes efficient energy usage while examining heat distribution. In electric iron, the soleplate is the crucial part, so an analysis is done on this part. Also, a change in design was made to increase …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 192–201 Read article
-
Enhancing Maintenance Decision-Making in Thermal Power Plants Using Generative AI-Based Fault Diagnosis
Abstract: The growing complexity of operation and power consumption of thermal power stations involve the need to have intelligent fault diagnosis systems that can be used to guarantee reliability and safety in operation. In this research, a Generative AI (GenAI)-based hybrid architecture of early fault detection and predictive maintenance is proposed to improve the decision-making process of the maintenance team. The data-driven analytic approach combines methods of data-driven analytics, Generative AI …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 25–33 Read article
-
A High-Efficiency Fuzzy-Logic-Controlled Wireless Charger Enabling the Safe Integration of Electronics in Carbon Fiber Reinforced Polymer E-Bikes
Abstract: The integration of advanced electronics into structures made from carbon fiber reinforced polymers (CFRP) presents significant challenges, including thermal management constraints, electromagnetic interference (EMI), and the imperative for lightweight components. This study addresses these challenges by designing and validating a fuzzy logic-based wireless charging system specifically engineered for lightweight E-Bikes employing CFRP frames. The system mitigates thermal risks associated with the low thermal conductivity of polymer composites by implementing a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1159–1172 Read article
-
A Thermal Review and Simulation of An Earth Tube Heat Exchanger
Abstract: AbstractConventional energy is the renewable source of energy. It is the best source of energy and free in nature also in abundance. At the present situation, heating and cooling is a major concern in environment due to global warming. Air conditioning systems has been developed to resolve major part of energy is being engaged in such issues. So, Earth tube heat exchanger is a renewable source of energy for heating …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 1–10 Read article
-
Hybrid Additive-Subtractive Manufacturing of Multi-Material Functionally Graded Components: Integration of Laser Powder Bed Fusion with High-Speed CNC Finishing for Aerospace Applications
Abstract: The synergy involved in the merging of additive and subtractive manufacturing technologies is the game changer to generate multi-material functionally graded components to be used in the aerospace industries. The paper is an in-depth review of a proposed hybrid additive-subtractive manufacturing, which synergistically merges laser powder bed fusion (LPBF) fashioning with rapid computer numerical control finishing production processes. The multi-material deposition, thermal issues, and optimization of post-processing are the challenges …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 398–418 Read article
-
Hybrid Polymer Nanocomposites with Enhanced Dielectric and Optical Properties for Wireless Communication Systems
Abstract: The incorporation of nanofillers into polymer matrices offers a promising approach to enhancing the multifunctional properties of composite materials. This study examines the effect of nanofiller concentration on the dielectric performance, mechanical strength, thermal stability, optical absorbance, and electromagnetic interference (EMI) shielding effectiveness of polyvinylidene fluoride (PVDF)-based nanocomposites. Titanium dioxide (TiO₂) and zinc oxide (ZnO) nanofillers were incorporated at varying concentrations to assess their influence on material properties. EMI shielding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 518–549 Read article
-
Incorporating Fly Ash into Road Construction: Sustainable Infrastructure Development
Abstract: With the rapid pace of industrialization and urbanization, there has been a concerning surge in the demand for cement usage. Simultaneously, the substantial production of fly ash and pond ash from thermal plants has led to environmental pollution. To address these pressing issues, the effective utilization of fly ash through partial cement replacement in high-strength concrete has emerged as a viable solution. Experimental investigations have demonstrated the feasibility of this …
Published in Trends in Transport Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 14–22 Read article
-
3D Printing of Polymer-Based Functionally Graded Materials: Recent Developments and Challenges
Abstract: Additive manufacturing (AM), specifically 3D printing, has become a useful technique for fabricating functionally graded materials (FGMs) because it can facilitate the spatial distribution of materials. Polymer FGMs (P-FGMs) have gained a great deal of interest due to their lightweight, customizable, multifunctional properties. In comparison to conventional fabrication, 3D printing allows better control of composition and microstructure, which results in materials with controlled mechanical, thermal, and biological properties. This review …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 338–347 Read article
-
A Thermal Review and Simulation of Renewable Tube Heat Exchanger – A Review
Abstract: AbstractRenewable energy is the conventional source of energy. It is the endless source of energy and quality available in nature. At the present scenario, heating and cooling is a major concern in environment due to global warming. Air conditioning systems has been developed to resolve major part of energy is being engaged in such issues, which also causes global warming. Renewable tube heat exchanger is a renewable source of energy …
Published in Journal of Nuclear Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 9–17 Read article
-
Design and Development of Metallic Isolators for Wedge Lock Mounted Printed Circuit Boards (PCBs)
Abstract: Wedge lock interfaces are preferred for mounting printed circuit boards (PCBs) in electronic packages of air borne vehicles. Merits of this particular mounting configuration are high mounting stiffness, high vibration dissipation and low thermal interface resistance. However, good amount of vibration dissipation occurs only in the close vicinity of wedge locks provided integral to PCBs; because of which electronic components can be mounted only near the wedge locks on PCB. …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 4, Issue 3, 2016 · pp. 27–34 Read article
-
Optimizing Power Generation from Building Ventilation Systems: A Study on Exhaust Fan Efficiency
Abstract: Due to population growth, the world's energy consumption has increased dramatically in both wealthy and developing nations in recent years, and by 2042, it is predicted to have doubled or more. Since a few years ago, the use of innovative sustainable power sources to meet energy demands has been gradually increasing. We've chipped away at a different idea because of this. As an alternative energy source, renewable energy (RE) resources …
Published in International Journal of Electrical Power and Machine Systems · Vol. 1, Issue 2, 2023 · pp. 22–27 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Hybrid Material Systems for Flexible Electronics Electro-Mechanical Performance and Future Prospects
Abstract: Flexible electronics are transforming the landscape of modern electronic systems, enabling devices that are lightweight, stretchable, and adaptable to complex surfaces. These technologies are particularly impactful in applications such as wearable health monitors, soft robotics, energy harvesting systems, and implantable biomedical devices. At the heart of this evolution are hybrid material systems—engineered composites that combine organic polymers and inorganic nanomaterials to achieve synergistic electro-mechanical properties. These materials address the limitations …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 7–12 Read article
-
Analysis of Thermoelectric Generator for Automotive Exhaust Energy Recovery
Abstract: Utilizing waste heat from thermodynamic systems has shown to be a successful tactic for reducing environmental emissions and improving overall energy efficiency. About 40% of the chemical energy generated during fuel combustion is rejected by exhaust gases in internal combustion engines. It is possible to increase vehicle fuel efficiency and lower greenhouse gas emissions by harvesting this otherwise lost heat energy and turning it into useable electrical power. A viable …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 21–33 Read article
-
Recent Advances in Crystal Defect Engineering of Semiconductor Photocatalysts for Sustainable Environmental and Energy Applications
Abstract: Semiconductor photocatalysis has emerged as one of the most promising green technologies for addressing environmental pollution and global energy challenges through solar energy utilization. Nevertheless, the practical application of conventional semiconductor photocatalysts is often limited by their narrow visible-light absorption, rapid recombination of photogenerated electron–hole pairs, insufficient active sites, and poor charge-transfer efficiency. Defect engineering has recently attracted significant attention as an effective strategy to overcome these limitations by deliberately …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 2, 2026 Read article
-
Management of Domestic Water Closed Loop System
Abstract: The paper describes a new technological process to reuse, thermally and hydraulically, the water inhome installations. The aim of the process is to reduce water wasting and take advantage of residualthermal energy to minimize energy expenditure. The system is especially developed for homeinstallations although it is also suitable for larger facilities. Filtering processes based on porous mediaensure the physical and chemical water quality while chlorination or disinfection by ultravioletradiation guarantees …
Published in Journal of Water Resource Engineering and Management · Vol. 10, Issue 3, 2023 · pp. 12–22 Read article
-
VARIATION OF THERMAL CONDUCTIVITY WITH POROSITY
Abstract: Thermal conductivity in porous media as a function of the grain size and porosity has been studied establishing a relation between these two parameters. The study has been developed for a homogeneous porous medium with grain size in a very close range of particle diameter. The study has been extended from very small particles to large ones, to cover most of the real grain size. As a result of this …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 1, 2020 · pp. 47–58 Read article
-
CMC/SWCNT Nanocomposites for Sustainable Smart Metering Sensors: Percolation-Driven Structure–Property Optimization, Experimental Validation, and Literature Benchmarking
Abstract: Biodegradable sensing materials are needed for sustainable smart electricity metering, yet cellulose/single-walled carbon nanotube (SWCNT) systems lack a unified percolation and structure–property description. This study develops carboxymethyl cellulose (CMC)/SWCNT nanocomposite films by solution casting, with SWCNT loadings of 0.0–5.0 wt%, and evaluates their electrical, mechanical, thermal, sensing, and biodegradation behavior. Percolation analysis of the insulator-to-conductor transition gave a critical threshold (φc) of 0.9 ± 0.1 wt% and a critical exponent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article