Search
1018 articles for “Metallic”
-
Effects of Weight Fractions on Properties of Aluminium-Fly Ash Metal Matrix Composites
Abstract: With particles of fly ash as the particulate addition, the properties of pure Al can be greatly improved. The incorporation of fly ash brings significant changes in some of its core properties like hardness, density, stiffness, strength, wear resistance. A comparison of the mechanical properties of pure Al have been done with three sets of Al-fly ash composites containing 6, 8 and 10% by weight fly ash which are manufactured …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 44–48 Read article
-
Hot Corrosion Behaviour of Sol-Gel Alumina Coated IN625 Alloy in Alkali Metal Chlorides and Sulphates Salt Deposit Systems
Abstract: Sol-gel derived alumina coating was applied on Inconel 625 alloy using dip coating technique and their hot corrosion studies were carried out in LiCl-NaCl and Na2SO4-K2SO4 salt deposits system at 650 °C and 850 °C respectively. Oxidation kinetics measurement indicated the occurrence of an order of magnitude lower oxidation rate and around 15–20 % higher activation energy for the coated substrate as compared to uncoated one. EDS analysis of the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 9–16 Read article
-
On a Nanocomposite Metal Oxide Thin-film Transistor with Nanofilm Gate Dielectric Material: Material Chemistry, Sol–Gel Process and Electronic Worthiness
Abstract: ABSTRACT : ILO based MOTFT is fabricated with PBZ gate dielectric. PBZ is formed over doped Si substrate by cheap sol-gel process. Thin film PBZ is analysed with XRD, UV-Vis and AFM. IZO is used as bottom gate to contact TFT. This device needs only 5V as operating voltage, and so is good for lower electronics <40V. It shows excellent e-mobility 4.5cm2/V/s, with on/off ratio 5x105 and sub-threshold swing 0.35V/decade.
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 3, 2019 · pp. 8–12 Read article
-
Fabrication and Experimental Investigation on Mechanical Properties of Quartz Particulate Reinforced Aluminium Composite
Abstract: Composites are processed by adding a reinforcement phase in a base metal. The base material is known as a matrix and the constituent that is added is called reinforcement. The matrix acts as a support while the reinforcements attach themselves in their respective positions which results in the synthesis of a material which has different mechanical and thermal properties compared to their raw materials. Since aluminium is used as a …
Published in Journal of Production Research & Management · Vol. 14, Issue 3, 2024 Read article
-
H2 Production by Methanol Steam Reforming over Copper Impregnated Anodized Aluminum Oxide (AAO)
Abstract: Hydrogen production by methanol steam reforming (MSR) is easy and simple as compared to other reforming methods using fossil fuels such as methane steam reforming. The catalysts for MSR are well developed and available commercially. When constructing a small or micro reformer, the catalyst often needs to be coated on the wall of the metal substrate. In this case, the bonding between the metal surface and the catalyst layer must …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 1, 2014 · pp. 23–28 Read article
-
Catalytic Activity Advancements in Organometallic Chemistry
Abstract: Organometallic chemistry is essential to catalysis and synthesis, helping to shape a wide range of chemical reactions. The study of the interactions between organic compounds and metal elements is known as organometallic chemistry. Modern synthetic chemistry and catalysis have been greatly influenced by the field of organometallic chemistry. It entails the investigation of substances that have metal-carbon bonds because they can have special catalytic and reactive qualities. Applications for these …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 2, 2023 · pp. 10–25 Read article
-
Fabrication of MOF5 -GO nanocomposites by tailoring graphene oxide
Abstract: The present paper focusses on the synthesis of graphene oxide and its nanocomposite with metal organic framework (MOF-5). Graphene oxide (GO) was prepared using modified hummer’s method with different concentrations of oxidizing agent to vary the presence of functional group on the surface of GO. The presence of functional group plays a crucial role in determining the interactions between GO and MOFs. To confirm the presence of different functional groups …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 101–114 Read article
-
Analysis of fabrication methods on Mg-based MMCs –A Review
Abstract: Magnesium is an essential material for resolving the applications in automotive applications such as in the use of gearbox bearings, casting dies etc. In the current studies, various researchers have made efforts to improvise the casting methods and to invent new fabrication procedures for Mg metal matrix composites (MMCs). This paper shows a basic study of fabrication methods of Mg-based MMCs. Such as pressureless infiltration, mechanical alloying, stir casting etc. …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 101–108 Read article
-
Corrosion and Corrosion Protection of Cast iron due to Bio-organism
Abstract: Cast iron is a high tensile strength metal. It is generally used for making tools, pipe fitting, electrical fitting equipment and rail track. It interacts with corrosive substances to develop electrochemical cell on their interface. Corrosive substances are acids, bases, salts, bio-wastes, particulates and pollutants. These substances produce hostile medium for materials. These harmful wastes discharge by industries, households, agricultural, urbanization, development of infrastructure, construction works, thermal power stations, hydropower, …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 105–114 Read article
-
STUDYING OF CHARACTERISTICS OF HYBRID COMPOSITE MATERIAL PRODUCED BY STIR CASTING METHOD
Abstract: A Metal framework composite is a composite material with no less than two constituent parts, one being a metal other fortification. At the point when no less than three materials are available, it is known as a mixture composite. Aluminum is generally utilized as a part of aviation and vehicle enterprises because of their low weight ratio and great mechanical properties, better consumption protection and wear, low temperature coefficient of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 2, 2018 · pp. 1–6 Read article
-
Waste Water Farming of Bottle Gourd and Lady’s Finger Induces Dietary Toxicity
Abstract: Objective: A large number of farmers are growing different vegetables and supplying them to the Solapur market. The majority of these farms are located on the banks of “nullah”, whose water is used for irrigation. From, a farm field in Degaon, a village on the Solapur-Mangalvedha road and on the bank of “nullah”, two fruit vegetables viz. bottle gourd (Dhoodhi bhopala) and lady’s finger (Bhendi) are evaluated in this study. …
Published in Research and Reviews: A Journal of Toxicology · Vol. 8, Issue 2, 2018 · pp. 21–30 Read article
-
Profiling of Essential, Potentially Essential and Non-essential elements in Onychomycosis affected nail samples using ICP-MS
Abstract: The Profiling of Essential, Potentially Essential, and Non- essential elements in Onychomycosis affected nail samples is done to understand the relationship between trace elements in the nail with Onychomycosis. The main objective of the study is to investigate the correlation between Onychomycosis and harmful heavy metal deposition in nail clippings based on the occupation, age, and sex of patients. About 14 Diseased and 5 normal human samples were used for …
Published in Research and Reviews: A Journal of Toxicology · Vol. 11, Issue 2, 2024 · pp. 46–55 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Impact of Fly Ash Pollution on Quality of Agricultural Soils Around Thermal Power Station
Abstract: The coal-fired Khaparkheda Thermal Power Station (KTPS) and its fly ash pond in Nagpur District, Maharashtra, India has been responsible for serious fly ash pollution incidents of agricultural soil. The present study was carried out on the quality of soil samples around the fly ash pond and KTPS. The physicochemical and chemical characteristics of soil samples were observed to be affected due to fly ash pollution. The fertility of soil …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 1, 2025 · pp. 6–17 Read article
-
Synthesis and Characterization of a Naphthalene-Derived Schiff Base for Fe³⁺ Sensing Applications
Abstract: The development of chemosensors for metal ions has gained significant attention due to their crucial role in industrial, environmental, and biological applications. Metal ion detection is essential for monitoring environmental pollution, industrial processes, and biological systems where metal homeostasis plays a vital role. In this study, we focus on the synthesis, characterization, and application of a novel naphthalene-based Schiff base ligand, derived from the condensation reaction between 1,8-diaminonaphthalene and 3-nitrobenzaldehyde. …
Published in International Journal of Cheminformatics · Vol. 2, Issue 2, 2024 · pp. 1–8 Read article
-
A Review: Distortion Control in 20MnMoNi55 Material Using GTAW and SAW Process
Abstract: Gas tungsten arc welding (GTAW) is high quality and high precision welding process which is suitable for welding thin metals. Inert gases such as helium and argon, carbon dioxide, nitrogen etc. are used as shielding gases to prevent the weld bead from air, dust and other contaminations in welding. There are so many welding process parameters affecting the weld quality in GTAW. Important process parameters which mainly affect the weld …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 3, 2016 · pp. 34–38 Read article
-
Heavy Fermions to the Scheme from Semimetals
Abstract: This article is a study about heavy Fermions to scope strange and unknown features of scattering accounted to conduction electrons in the metal. Nucleons generated by heavy metal compounds are named heavy fermions. These generate from magnetic impurities that are present in the matter as unusual distribution in particulate forms. Parameter of quasi-crystal lattice instability of these compounds has significance in response to behave as non-Fermi liquids affected under magneto-transport. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 15–22 Read article
-
A Review of Thermal Spray Coatings
Abstract: Thermal spray coatings are applied on surface of metals to improve their functional properties. Thermal spray technique offers the possibility to deposit wide range of ceramic coatings on metallic components. In the present paper we discuss the various types of coatings deposited using thermal spray techniques. The effect of rare earth metal oxides on microstructure and mechanical properties of the coatings are being discussed.
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 1–6 Read article
-
Autonomous Optimization, Method Design of Casting and Its Experimental Validation: A Case Study
Abstract: The metal casting is a complicated but a mass production manufacturing technique. But on the otherhand, the chances of casting rejection are also more if proper attention is not made at every stage ofcasting production. In the metal casting process, higher yield and minimum defects level are expectedby the foundry industries. In the present global and competitive world metal casting industries needsto perform efficiently with a reduction in rejections. This …
Published in Trends in Machine design · Vol. 8, Issue 1, 2021 · pp. 1–10 Read article
-
Effect of different concentrations of mercuric iodide on the growth of Microcystis spp.
Abstract: Cyanobacteria are commonly called as blue green algae which are abundantly distributed in both aquatic and terrestrial ecosystem. They are procaryotic autotrophic organisms and have thallus structure. Such organisms are actively involved in the biological nitrogen fixation which can fix the atmospheric nitrogen and converts into ammonia compounds. Plants can utilize such converted components for their growth and metabolic activities. Since they are diazotrophs which is the suitable supplement to …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 13, Issue 1, 2023 · pp. 1–6 Read article