The metal casting is a complicated but a mass production manufacturing technique. But on the otherhand, the chances of casting rejection are also more if proper attention is not made at every stage ofcasting production. In the metal casting process, higher yield and minimum defects level are expectedby the foundry industries. In the present global and competitive world metal casting industries needsto perform efficiently with a reduction in rejections. This requirement can be fulfilled by a propermethod design by casting simulation. The aim of the present study is to identify regions of hot spots,micro porosity, and shrinkage formation in a ‘T’ shape junction Aluminum base alloy casting. Theregions with heavy cross section are prone to getting produced with hot spot and shrinkage defect.Here various experiments were conducted with varying Feeder and neck dimensions which plays animportant role in maximizing casting yield. The objective of this study is to study effect of feeder sizeand location on casting defect formation like hotspot, microporosity and shrinkage in Aluminumcasting T Section and to identify most influencing gating system design factor like feeder dimension.The T shaped model is used as bench mark in prediction of defect location of Al-Cu cast alloy bygreen sand-casting process and with Click2Cast casting simulation software.
Ayar MS, Ayar VS, George PM. Simulation and experimental validation for defec t reduction in geometry varied aluminium plates casted using sand casting. Mater Today Proc. 2020;27:1422 –
Hodbe GA, Shinde BR. Design and Simulation of Lm 25 sand casting for defect minimization. Mater Today Proc. 2018;5(2):4489–97. doi:10.1016/j.matpr.2017.12.018.
Naveen KG, Abhishek R, Chakraborty Saurabh A. Development of feeder design using casting simulation. Int J Eng Sci Math. 2017;6(8):432–9.
Jathar Kiran R, Hankare Anant V, Sapkal AA. Gating system and feeder design of aluminium alloy (AA6063) casting for rectangular component. J Adv Sci Technol. 2017;13(1):35–40.
Khade US, Nimbalkar V. Application of 3D CAD modeling and casting simulation to eliminate casting defects. International Journal of Research in Advent Technology. 2016.
Rohith KR, Rahul R, LiroyOppa n, et al. Design and analysis of gating system for SB -CNC tail stock base casting. Int J Adv Eng Glob Technol. 2016;4(2):1814–18.
Jacob E, Chiniwar DS, Savitri S, et al. Simulation -based feeder design for metal castings. Indian Foundry J. 2013;59(12):39–44.
Sikorski S, Dieckhues GW, Sturm JC. Systematic optimization of aluminum sand casting gating systems. Vol. 120. American Foundry Society; 2012. p. 13–21.
Nandi T, Behera R, Kayal S, et al. Optimization of Riser size of aluminium alloy (LM6) castings by using conventional method and computer simulation technique. Int J Sci Eng Res. 2011;2(11).
Davis JR. Aluminum and aluminum alloys. ASM International; 1993.
Related articles
Other papers on this site that share keywords with this one, closest match first.