Search
700 articles for “mechanical test”
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Utilization of Recron Fibers for Improving Subgrade Stability of Expansive Soils
Abstract: The major interest in the utilization of synthetic fibers is used as reinforcing material for developing reinforcing effect into the entire soil composition laid bellow the structures whare as construction works are going on. Various articles are published on soil reinforcement, yet some of them fibers used are prepared by using with synthetic materials, one type of synthetic fibers were Recron fiber it is used as a reinforcing element to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 170–178 Read article
-
Investigation of Mechanical Characteristics of 3D Printed Composite Materials (Thermoplastic Urethane and Nylon (PA6))
Abstract: 3D printing has emerged as a game-changer, progressively replacing conventional metals and thermosetting polymers, primarily due to its capacity to create lightweight structures with impressive mechanical attributes. The technology's advantages, such as minimized material wastage, design adaptability, and the ability to craft intricate structures, have propelled its widespread adoption. Within the realm of additive manufacturing, Fused Deposition Modeling (FDM) stands out as a technique capable of producing intricate functional components. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 65–76 Read article
-
A Study to Assess the Effectiveness of Body Mechanics Training Programme on Reducing Low Back Pain Among Nursing Officers Working in Selected Hospitals, Bangalore
Abstract: Background: Low Back Pain (LBP) is a common work related injury and costly problem among the nursing profession. Numerous studies indicate a greater occurrence of back pain and work-related back injuries among nursing officers in comparison to other occupations. Prevention of LBP is a very important technique to maintain proper body mechanics. This study aimed to assess the effectiveness of body mechanics training programme on reducing low back pain among …
Published in International Journal of Orthopedic Nursing and Practices · Vol. 2, Issue 1, 2024 · pp. 29–62 Read article
-
Investigation into mechanical Characterstics of laminated composite materials (PMMA and NYLON) using FDM
Abstract: The widespread embrace of 3D printing technology stems from its capacity to minimize material waste, offer versatile design options, and enable the production of intricate structures. 3D printed polymer composites reinforced with fibers (carbon, glass, nylon etc.) have been extensively used in automobile, marine, aerospace and energetic applications due to their excellent properties. Nylon fiber is light weight, resistance to damage from oil and chemicals, tough, strong and has higher …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 108–121 Read article
-
Use of Alccofine and Porcelain Waste Aggregate in Concrete Composite for Strength Enhancement
Abstract: Building construction applications benefit from recent studies on alumino-silicate alkaline activation geo-polymers and their supplementary modifier alccofine as well as new process advancements characteristics including flexural strength and split tensile strength determine structural performance and durability. The construction sector utilizes supplementary cementitious materials, waste materials, and Geo Polymer Concrete (GPC) for concrete composites because it requires environmental sustainability along with better functionality and longer service life of concrete structures. This …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 23–33 Read article
-
Enhancing Fire Performance of Steel Reinforcement in RCC Structures: A Comprehensive Investigation
Abstract: The assessment, repair, and rehabilitation of fire-damaged structures have become crucial due to the rise in significant building fires.This particular field necessitates proficiency in various domains including concrete technology, material science and testing, structural engineering, and repair materials and processes. Researchers and developers are currently engaged in extensive efforts to tackle the challenges related to improving the fire resistance of steel reinforcement in reinforced concrete (RCC) structures. These endeavors involve …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 33–40 Read article
-
Investigation on mechanical performance of 3D printed PLA-Kraft Lignin composites
Abstract: Bio-based polymer composites are becoming more popular due to the growing need for sustainable and biodegradable materials in additive manufacturing. PLA-kraft lignin composites were created and their mechanical performance in fused deposition modeling (FDM) applications was assessed in this work. Polylactic acid (PLA) was mixed with Kraft lignin, a sustainable by-product of the paper industry, at weight percentages of 0%, 1%, 3%, 5%, and 7%. Melt blending was utilized to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1002–1015 Read article
-
Effect of PWHT Cycle on Microstructure and Mechanical Properties of 1.25Cr-0.5Mo Weld
Abstract: Post Weld Heat Treatment (PWHT) is a process of reducing residual stresses and enhancing material properties of any material after welding. The process depends on many parameters like type of material, the thickness of material, PWHT temperature, soaking time, heating and cooling rate, etc. The Post Weld Heat Treatment process of material could effect on tensile strength, impact toughness, hardness, microstructure, etc. If the Process of PWHT is performed incorrectly …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 1, 2019 · pp. 7–16 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Design and Fabrication of a 3D-Printed Femur Model: Insights into Mechanical Properties and Implant Research
Abstract: This study is an attempt to analyse the 3D printing of the female femur model of the central India region and provides ample suggestions for bone implant research. This article discusses the design development and experimental validation of finite element analysis (FEA) results with the 3D-printed bone model. Using CT scan data, the FE analysis is executed on a real femur bone of a 25-year-old female of 52 kg weight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 329–338 Read article
-
Experimental Analysis of Mechanical Characteristics of Aluminium Matrix Hybrid Composite Using Seashell Powder And Coconut Shell Powder
Abstract: The purpose of this study is to investigate the manufacturing processes and mechanical properties of composites made of marine shell powder, coconut shell powder, and aluminium. In our project, the MMC was made of aluminium with seashell powder and aluminium with coconut shell powder. A stir casting process fabricated the Composite. The composition of aluminium, seashell powder and coconut shell powder varies. According to the criteria established by the American …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 487–494 Read article
-
Efficient Malware Detection in Cybersecurity: Leveraging Advanced Data Structures for Enhanced Threat Identification
Abstract: The cybersecurity landscape is constantly changing with more advanced malware creating major challenges for detection systems. To address these challenges effectively, advanced data structures have become essential in optimizing how data is managed, processed, and analyzed for malware detection. This review paper delves into the role of several cutting-edge data structures—bloom filters, tries, hash tables, graphs, decision trees, and suffix trees—in enhancing the efficiency and accuracy of malware detection mechanisms. …
Published in International Journal of Data Structure Studies · Vol. 2, Issue 2, 2024 · pp. 32–40 Read article
-
Experimental Study on Sustainable Light Weight Concrete Incorporating with Oil Palm Industrial Waste
Abstract: In present days a very huge number of raw materials are used by the construction sector which releases very large amount of harmful gases such as carbon dioxide (CO2) into the environment. To avoid such problems research should be focused on sustainable materials, among which Oil Palm industrial waste that can be used in concrete. The main purpose of this research is to utilize the palm oil fuel ash (POFA) …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 1–18 Read article
-
Comparative Analysis of Polyethylene Terephthalate Based Blended Lean Mortar Mixes by Applying Mathematical Simulations and Regression Approach
Abstract: Currently, construction manufacturing units need an abundant number of non-renewable resources rising in the quarrying of natural strata, producing a disparity in our precious environment. Besides this, a plentiful amount of waste material like plastic waste in several forms such as solid, filler, etc., is generated gradually. Therefore, efficient sustainable disposal seemed like a threatening mission across the world. To mitigate the issue, in the present investigation, fine aggregate (sand) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 60–70 Read article
-
Advancements in Metal-Plastic Hybrid Structures: Experimental Analysis and Design Optimization of 3D-Printed Honeycomb Frameworks
Abstract: The exploration of metal-plastic hybrid structures has gained significant attention due to their potential for lightweight, high-strength applications across industries such as aerospace, automotive, and construction. This study investigates the experimental and design enhancements of a metal-plastic hybrid structure utilizing a honeycomb architecture produced through 3D printing. By integrating metals with plastic polymers in a honeycomb configuration, this hybrid approach aims to combine the high strength and stiffness of metals …
Published in Trends in Machine design · Vol. 11, Issue 3, 2024 · pp. 36–43 Read article
-
Evaluating The Durability and Environmental Sustainability of Hybrid Natural - Synthetic Fiber Composites
Abstract: This study examines the characteristics of hybrid composites composed of natural fibers (such as jute, hemp, or kenaf) and synthetic fibers (such as glass or carbon) integrated within polymer matrices. The hybridization method seeks to enhance the advantages of both fiber types, hence augmenting overall performance relative to single-reinforced composites. Mechanical properties like tensile strength, flexural strength, impact resistance and hardness were evaluated through experimental tests. The results demonstrate that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 93–102 Read article
-
Effect of 3D Printing Process Parameters on the Tensile Strength of Polylactic Acid (PLA)
Abstract: This study employs the Taguchi approach to systematically analyze and optimize critical Fused Deposition Modeling (FDM) parameters, focusing on their effect on the tensile strength of 3D-printed Polylactic Acid (PLA) components. The study explores three levels of layer thickness (0.15 mm, 0.25 mm, and 0.3 mm), infill densities (25%, 50%, and 75%), and nozzle temperatures (200°C, 205°C, and 210°C) across three infill patterns: Triangular, Gyroid, and Zig-zag. A total of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 128–140 Read article
-
Experimental Analysis of Glass Fiber Composite on Low Velocity Impacts
Abstract: This research specifically deals with determining the retained tensile strength after loading Glass Fiber Reinforced Polymer (GFRP) composites following low-velocity impact. The purpose is to determine the degree to which these impacts affect the structural performance and mechanical integrity of GFRP materials. Experimental tests were conducted on glass fiber composite specimens in order to observe variation in tensile strength upon impact. The results indicated significant tensile strength reduction in impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 789–796 Read article