Search
290 articles for “hybrid material”
-
Thermal Stability and Sound Absorption Behaviour of Sisal–Luffa Hybrid Epoxy Composites for Automotive Interior Applications
Abstract: Natural fiber–reinforced composites are gaining popularity as substitutes for synthetic fiber composites because of their environmental and sustainability advantages. Their adoption is steadily increasing across various industries. In automotive interior applications, these materials must exhibit strong thermal stability and efficient sound absorption to meet performance requirements. In this experiment, composites were made by mixing sisal and luffa fibers with epoxy resin. The hand lay-up method was used for fabrication. Two …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 144–157 Read article
-
Experimental Investigation of Mechanical Properties of the Composite Materials Reinforced by Agro-based Waste Materials
Abstract: In this work, experiments were carried out to develop the glass fiber reinforced composites using the hand layup method and analyze the mechanical properties of the GFRP hybrid composites. The ultimate Tensile strength (UTS) using rice as a filler (GFRPC/R) was 3.04% and 12.89% higher than coir and wheat as filler, respectively. The hybrid composite using coir as a filler (GFRPC/C) revealed 12.54% greater flexural strength, and the hybrid composite …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 186–196 Read article
-
ML-Enhanced Self-Healing Fiber-Reinforced Polymer Composites with Embedded IoT Sensors for Damage Prediction
Abstract: Fiber-reinforced polymer (FRP) composites are widely used in aerospace and structural systems; nevertheless, the potential for microcracking and fatigue-induced performance degradation remains an obstacle with respect to improved service life. Traditional self-healing methods, while performing well on a chemical level, often lack real-time diagnostic awareness and adaptive control. To circumvent this, we developed a machine-learning augmented self-healing FRP composite, in which a DCPD–Grubbs catalytic matrix was combined with IoT sensor …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 188–208 Read article
-
Enhancement of Mechanical Properties in Eutectic Al-Si Alloy Matrix Composites Reinforced with Kyanite and Graphite via Stir Casting
Abstract: The purpose of this work is to enhance the mechanical performance of a eutectic Al–Si alloy by incorporating hard ceramic (kyanite) and soft solid lubricant (graphite) reinforcements using a liquid-state stir casting route. Metal matrix composites were fabricated with kyanite contents of 2, 4, and 6 wt.% and a constant 2.5 wt.% graphite. Their microstructures and mechanical properties were systematically evaluated. The microstructure was examined using optical microscopy and energy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 90–100 Read article
-
Polymeric Nanocomposite Aided Bioaugmentation for Marine Oil Spills – A Review
Abstract: Bioaugmentation is a promising, cost-effective bioremediation technique that enhances the degradation of marine pollutants by introducing hydrocarbon-degrading microorganisms. This review explores recent advancements in the use of bioaugmentation for petroleum biodegradation in marine environments, emphasizing the integration of microbial systems with polymeric and composite materials. Innovative methods, such as the immobilization of microbial cells within biodegradable polymeric matrices (e.g., alginate, chitosan, polyvinyl alcohol), have significantly improved microbial viability, metabolic efficiency, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1049–1061 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Hybrid Polymer Nanocomposites with Enhanced Dielectric and Optical Properties for Wireless Communication Systems
Abstract: The incorporation of nanofillers into polymer matrices offers a promising approach to enhancing the multifunctional properties of composite materials. This study examines the effect of nanofiller concentration on the dielectric performance, mechanical strength, thermal stability, optical absorbance, and electromagnetic interference (EMI) shielding effectiveness of polyvinylidene fluoride (PVDF)-based nanocomposites. Titanium dioxide (TiO₂) and zinc oxide (ZnO) nanofillers were incorporated at varying concentrations to assess their influence on material properties. EMI shielding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 518–549 Read article
-
Greener 3D Printing: The Role of Artificial Intelligence in Sustainable Polymer and Composite Manufacturing
Abstract: The integration of sustainable materials with additive manufacturing (AM) technologies marks a significant step towards environmentally responsible production. Biodegradable polymers, recycled thermoplastics, and bio-based composites, when used in 3D printing, offer the potential to reduce the ecological footprint of manufacturing. However optimizing the interplay between material properties process parameters, and product performance remains a complex challenge. This review examines how artificial intelligence (AI) is being applied to address these challenges …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 288–300 Read article
-
Next-Generation Membrane Materials: Advances, Applications, and Challenges
Abstract: Advanced membrane materials are better than regular polymers because they are more selective, permeable, and stable. New developments in nanomaterials, composite membranes, and surface engineering are making it possible to do more with water purification, gas separation, biomedical applications, and energy systems. Membrane technologies have become important tools in many areas, including biomedicine, energy systems, gas separation, and water purification. Recent progress in material science has made it possible to …
Published in International Journal of Membranes · Vol. 2, Issue 2, 2025 · pp. 19–28 Read article
-
Synthesis and characterization of mixed SnO2-ZnO Nano composites material to study the kinetics of catalytic reduction of Aromatic Nitro compounds
Abstract: A straightforward and cost-effective method was employed to synthesize zinc oxide (ZnO) nanostructures supported on tin oxide (SnO₂) for catalytic applications. This hybrid nanocomposite, formed by integrating ZnO with SnO₂, exhibited impressive catalytic activity in the reduction of various nitro compounds. The synergistic interaction between ZnO and SnO₂ significantly enhanced the surface area and active sites of the catalyst, thereby improving its overall efficiency. The resulting SnO₂-ZnO nanocomposite not only …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 3, 2025 · pp. 8–14 Read article
-
Review on Severe Plastic Deformation Techniques for Bulk Materials: Deformation Behavior and Properties
Abstract: This paper presents a detailed review of the efficient application of Severe Plastic Deformation for the fabrication of ultra-fine-grained and nanostructured crystalline bulk materials. Severe Plastic Deformation allows substantial grain refinement while largely preserving the original dimensions of the workpiece, making it especially suitable for ductile materials capable of sustaining very high strains under elevated hydrostatic pressure prior to failure. The study investigates the grain refinement mechanisms involved in Severe …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 40–72 Read article
-
Development and Evaluation of Hybrid Natural Fiber Composites
Abstract: Natural fiber based polymer composites are becoming more common because they are cheap, sustainable, and operate effectively across mechanical and environmental settings. Natural fibers (NFs) like bamboo and roselle are being used to strengthen polymer composites. They are being used in textiles, medical equipment construction, and car making. People are becoming more interested in these fibers because of the unique properties. Bamboo fiber is an effective option for reinforcement in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 908–915 Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Advanced Water Purification Techniques for Sustainable Clean Water Management: A Comprehensive Review
Abstract: The growing global demand for safe drinking water, coupled with increasing pollution from industrialization, urbanization, and agricultural activities, has intensified the need for efficient and sustainable water purification technologies. Conventional water treatment processes often fail to remove emerging contaminants such as pharmaceuticals, microplastics, endocrine-disrupting compounds, and heavy metals. Advanced water purification technologies—including membrane filtration, advanced oxidation processes (AOPs), nanotechnology-based adsorbents, photocatalysis, electrochemical treatment, and bio-inspired purification systems—have emerged as promising …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 47–52 Read article
-
Engineering Sustainable Interior Materials: Performance Analysis of PLA Composites Reinforced with Banana Stem Fiber and Spent Coffee Grounds
Abstract: This study presents the development and classification of eco-friendly composite panels reinforced with spent coffee grounds (SCG) and banana stem fibers (BSF) for interior applications. Hybrid composites were fabricated using polylactic acid (PLA) as the matrix with a constant filler loading of 30 wt%, varying BSF:SCG ratios (70:30, 60:40, 50:50). Mechanical testing revealed that the 70:30 composite exhibited the highest tensile strength (42 MPa) and flexural strength (58 MPa), whereas …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 94–105 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
Solar Thermal Energy Utilization: Design Innovations and Performance Enhancement Techniques
Abstract: The utilization of solar thermal energy has become increasingly significant in the pursuit of sustainable and low-carbon energy solutions. Unlike photovoltaic technologies that directly convert sunlight into electricity, solar thermal systems focus on harnessing solar radiation to generate heat, which can then be applied to diverse sectors such as water heating, space conditioning, industrial process heating, and power generation. In recent years, substantial research efforts have been directed toward enhancing …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
IoT-Enabled Self-Monitoring Polymer Composites for Solar Facade Systems with Cloud-Based Thermal Analytics
Abstract: The increasing demand for intelligent and energy-efficient building systems has hastened the production of smart solar facade systems. This paper presents an IoT-based self-monitoring polymer composite system, which includes thermal analytics running on the cloud to provide real-time assessments of the performance of the facade. The artificial composite panel has sensing capability built in which the material is able to measure both surface and internal thermal behavior simultaneously in dynamic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 657–681 Read article