Search
228 articles for “ALU”
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Properties of Binary Waste Based Geopolymer Concrete Composite: A Review
Abstract: Concrete composite as construction material is utilized all over the world and it is not considered as eco-friendly because cement is provided as a binder in it. Therefore, replacing binder in concrete composite by alumina and silica rich by-products in presence of chemical activators give rise to geopolymer concrete composite which is eco-friendly in nature. Geopolymer concretes composite can be used to build a variety of structural configurations, have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 44–52 Read article
-
A Review of Embodied Energy Strategies to reduce the carbon emissions in Sustainable Buildings
Abstract: Buildings in India account for almost one-fifth of the nation's carbon emissions, making it the third- largest carbon emitter globally. These emissions are expected to climb by 50% over the next 20 years, which is the biggest increase of any nation. You would have to go into a jungle to avoid concrete, steel, and aluminium since they are so common. Just these three substances are responsible for 23% of the …
Published in International Journal of Architectural Design and Planning · Vol. 3, Issue 1, 2025 · pp. 18–27 Read article
-
A Review on Materials and Working Process Parameters of Selective Laser Sintering
Abstract: The potential for additive manufacturing technology to replace some of the current conventional manufacturing methods makes it one of the research and development fields that is expanding quickly. With additive manufacturing, three-dimensional physical models are produced layer by layer from computer-aided design (CAD) models. Fully dense metal things may be produced more rapidly and accurately with additive manufacturing. The Selective Laser Sintering (SLS) procedure uses powder bed fusion, in which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 522–529 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Studies on the antioxidant content and antimicrobial activity of cucumber (cucumissativus) peel collected from bagmari, kolkata, west bengal, india
Abstract: Cucumber (Cucumis sativus) is widely consumed across the globe, yet its peels are commonly discarded as waste, despite possessing a wealth of bioactive compounds. Recent studies have highlighted that these peels contain substantial amounts of antioxidants, antibacterial, anti-inflammatory, and anti-carcinogenic properties, making them a promising candidate for value-added applications. In this study, methanolic extracts (80% v/v) of cucumber peels were systematically analyzed to assess their total phenolic content (TPC), total …
Published in Emerging Trends in Metabolites · Vol. 2, Issue 2, 2025 Read article
-
ANN Approach to Forecasting the Strength of Nano Silica Incorporated Geopolymer Composite
Abstract: Coal and steel industry by-products, such as fly ash (FA) and blast furnace slag (GGBS), have gained significant attention as precursors for geopolymer concrete (GPC) due to their high aluminosilicate content, offering a sustainable alternative to conventional cement. Nano silica (NS), recognized for its exceptional pozzolanic activity and ability to refine microstructure, has shown potential to enhance the mechanical and durability properties of GPC. This study investigates the influence of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 267–278 Read article
-
The Silent Mineral: Structural Complexity and Industrial Utility of Natural Kaolin
Abstract: Kaolin, a naturally occurring aluminosilicate clay predominantly comprising the mineral kaolinite (Al₂Si₂O₅(OH)₄), exhibits a 1:1 layered silicate structure that imparts distinctive physicochemical properties suitable for extensive industrial utilization. Deposits of kaolin are broadly classified into primary (residual) and secondary (sedimentary) categories, each defined by their geological origin and mineralogical features. The industrial processing of kaolin encompasses stages such as raw material extraction, beneficiation, and purification, aiming to optimize parameters including …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 52–61 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Synthesis of Thermal Resistant and Transparent Al2O3 Reinforced Epoxy-Based Composite Coatings
Abstract: This study explores the influence of thermal treatment on the structural, optical, and surface wettability characteristics of epoxy-based composite coatings reinforced with 3 wt.% aluminum oxide (Al₂O₃) nanoparticles. The coatings were synthesized via a dip-coating method on carbon fiber substrates and subjected to controlled thermal treatments at 300 °C, 400 °C, and 500 °C to assess their thermal resilience. X-ray diffraction (XRD) analysis confirmed the structural integrity of the composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 178–183 Read article
-
Optimization of Turning Process Parameters by Genetic Algorithm Approach
Abstract: In this research, turning parameters were optimized through a genetic algorithm for the purpose to minimize surface roughness and to maximize the material removal rate. High finish quality is guaranteed through minimum surface roughness, and efficient process planning is facilitated through maximum material removal rate optimization. For predicting surface roughness and material removal rate with respect to spindle speed, feed rate, and depth of cut, the empirical models were developed …
Published in Journal of Production Research & Management · Vol. 15, Issue 1, 2025 · pp. 33–41 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Utilization of Banana Peel Biopolymer as a Natural Coagulant for Wastewater Treatment: A Sustainable Approach to Bio-Composite Applications
Abstract: This study explores an eco-innovative approach to wastewater treatment by utilizing banana peel powder (BPP) as a sustainable, low-cost bio-coagulant. Although effective, conventional chemical coagulants like aluminum sulfate and synthetic polymers are often non-biodegradable, toxic, and economically burdensome, particularly in decentralized or low-resource settings. In contrast, BPP—an agro-waste material rich in bioactive functional groups such as hydroxyl, carboxyl, and phenolic compounds—provides a renewable and environmentally friendly alternative. To enhance its …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 106–115 Read article
-
Facile Synthesis and Characterization of Cd²⁺ Doped NiAl₂O₄ Nanoparticles for Advanced Polymer Composite Integration
Abstract: Ni1-xCdxAl2O4, where 0 ≤ x ≤ 0.5, was successfully synthesized using the chemical co-precipitation technique, a scalable and cost-effective route suitable for composite material applications. X-ray diffraction (XRD) analysis revealed a crystalline cubic spinel structure for the resulting nanoparticles, with determined crystallite sizes ranging from 36 to 12 nm for NiAl2O4 and Cd-doped NiAl2O4. The respective band gaps for the materials were found to be 3.51 and 4.18 eV. Infrared …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 59–72 Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article
-
Tribological Performance and Wear Coefficient Prediction of AA2024–TiC Composites via Python-Based Machine Learning
Abstract: Determining wear coefficient accurately serves as a critical factor to maximize engineering materials' tribological characteristics. The experiment examines the wear characteristics of TiC-reinforced AA2024 aluminum alloy subjected to different tribological operating conditions. A pin-on-disc tribometer performed wear tests under different conditions of load and TiC weight fraction and sliding speed and duration. ANOVA statistical results show that load intensity and TiC reinforcement density stand out as principal variables that affect …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1099–1112 Read article
-
Evaluate The Engineering Properties of Low Load-Carrying Capacity of Expansive Soil by Using Magnesium Chloride and Dry Leaf Ash Powder
Abstract: The swell-shrink behavior of expansive soils poses numerous challenges with the substructure and distress in infrastructures such as buildings, pavements, breast walls, etc. The behavior of expanding soil has been carefully examined by geotechnical engineers, who have then put adequate management techniques into place. Present investigation intends to investigate potential benefits of dry leaf ash (DLA) powder and magnesium chloride (MgCl2) to enhance geological characteristics of soil, particularly addressing problems …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 33–45 Read article
-
Analysis of Friction Stir Welding Utilizing ANSYS: A Study Based on Simulation
Abstract: Friction Stir Welding (FSW) represents a sophisticated solid-state welding methodology that has attracted considerable scholarly attention due to its efficacy in amalgamating high-strength, lightweight substrates including aluminium, magnesium, and titanium alloys. FSW enables the fabrication of defect free products with a substantial amount of mechanical and wear properties. The process is highly sensitive to various parameters that significantly influence the quality and strength of the final product. Studies have shown …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 62–77 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article