Search
44 articles for “load testing machine”
-
Design & Development of Helical Compression Spring Using Composite Material
Abstract: The paper embodies the manufacturing of a helical compression spring using composite material. The main motive for the use of composite material spring is its low density and greater stiffness to that of a steel spring. The composite material spring has greater stiffness to weight ratio as compared to the steel spring. We have manufactured carbon fibre and glass fibre spring using filament winding technique as less as possible economical …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 16–23 Read article
-
Fabrication and Evaluation of Mechanical Properties of Banana Fiber Reinforced Epoxy Composites
Abstract: Natural fiber reinforced composites are gaining attention in recent days due to eco-friendly nature, sustainability, low cost and easy availability. The natural fibers are enriched with favorable mechanical properties which diversify artificial fibers are bio-degradable, nonhazardous, light weight. In this submission, specimens of the banana fiber reinforced epoxy composites are developed to evaluate the mechanical properties. The composite sample specimens are designated with different fiber orientations using the hand lay-up …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 37–47 Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
Effect of Cryogenic Treatment on Wear Characteristics of T42 High Speed Steel
Abstract: In this study cryogenic treatment is performed on AISI T42 HSS material and its wear characteristics are studied. Test of treated and untreated samples is taken on pin on disc wear testing machine at different loads and RPMs. The wear of the sample is measured. The wear resistance of the samples is also measured by weight loss method. The results are tabulated. An experimental effort to evaluate tool wear improvement …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 2, 2016 · pp. 70–79 Read article
-
Estimation of Mechanical Properties of Kevlar/Basalt Intrawoven Composite Laminates Containing Nanoparticles
Abstract: Purpose: The research describes estimation of various Mechanical properties like compression, tensile, shear and impact strength of Kevlar/Basalt (KB) Intrawoven 1×1 composite laminates, each comprising 1%, 3% and 5% of Al2O3 (Aluminium oxide) nanoparticles. Design/methodology/approach: These are woven with the help of manual handloom weaving machine, compression moulding technique was adopted for the fabrication of hybrid composite laminates. Attempts have been made to analyse the mechanical properties of Kevlar/Basalt intrawoven …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 1–12 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Analysis and Improvement in Tribological Properties of Coated HSS Tool
Abstract: The use of low friction coatings like TiAlN and AlCrN is to improve the tribological properties of tools for metal cutting, forming and machine elements. It is strong scientific interest to conduct fundamental tribological research on the materials that exhibits low friction and can be used for surface coating on surfaces to rub against with reduced friction and wear. Parameters influence the quality of the products in turning process. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 1, 2018 · pp. 23–36 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Study of High Strength Fiber Reinforced Metakaolin Concrete under Flexure and SplitTensile Strength
Abstract: An experimental investigation was carried out to study the effect of inclusion of metakaolin and steel fibers on high strength concrete in flexure and split tensile strength. The beams of 150x150x700 mm were casted. M60 grade of concrete was used. Superplasticizers were used to improve workability. The metakolin was added upto 20% with the increments of 5% and steel fibers were added upto 5% with the increment of 0.5%. Various …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 70–80 Read article
-
Developing a Model in Matlab/Simulink Environment for Induction Motor Considering Core Loss and Stray Load Loss
Abstract: This paper focuses on a Matlab/Simulink model of a squirrel-cage induction motor with consideration of core loss and stray load loss. This model is based on some mathematical expressions and also described through an equivalent circuit including core loss and stray load loss. The model of induction motor has been developed based on the state space equations in a synchronously rotating reference frame, where core loss and stray load losses …
Published in Trends in Electrical Engineering · Vol. 4, Issue 2, 2014 · pp. 1–12 Read article
-
Ni-MH Battery Dynamic Model with Reversible DC Machine and a Constant Load for Electric Vehicle Applications
Abstract: The global issues like fossil fuel burning and pollution created have become a headache for the whole world, and therefore the Electric Vehicles (EV) are getting high attention. This paper deals with the Ni-MH battery model for the EV applications. The model described in the paper is entirely dynamic. A test bench is created in the Matlab/Simulink® for the dynamic battery model. Few tests were conducted to prove the adaptability …
Published in Journal of Power Electronics and Power Systems · Vol. 8, Issue 2, 2018 · pp. 30–37 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Tribological Performance and Wear Coefficient Prediction of AA2024–TiC Composites via Python-Based Machine Learning
Abstract: Determining wear coefficient accurately serves as a critical factor to maximize engineering materials' tribological characteristics. The experiment examines the wear characteristics of TiC-reinforced AA2024 aluminum alloy subjected to different tribological operating conditions. A pin-on-disc tribometer performed wear tests under different conditions of load and TiC weight fraction and sliding speed and duration. ANOVA statistical results show that load intensity and TiC reinforcement density stand out as principal variables that affect …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1099–1112 Read article
-
Investigation, Fabrication and Testing of Spur Gear Using Composite Material
Abstract: Composite materials constitute one of the favorable, efficacious material zones for tomorrow’s sustainable future through identification of materials with higher strength to weight ratio. A composite material is combination of two or more different materials with varied qualities that work together to create a material that is better than the sum of its parts. Therefore, finding some alternative material for various mechanical applications to accelerate the Indian composite industry is …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 1–8 Read article
-
Comparative Evaluation of the Effect of Adhesive Restorative Techniques on the Reinforcement of Simulated Immature Permanent Teeth: An in Vitro Study
Abstract: The aim of the study was to compare the reinforcement effect of 3 different adhesive restorative techniques on simulated immature maxillary central incisors after apexification. A total of 30 simulated immature permanent maxillary central incisors were randomly assigned into 3 groups (n=10), according to the reinforcing technique used: Group 1: Nanohybrid composite. (Tetric N-Ceram Ivoclar Vivadent), Group 2: Short-fiber reinforced composite (everX posterior GC EUROPE) extended 3mm below CEJ, covered …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 69–75 Read article
-
Enhancing Power Conversion Efficiency in Tandem Solar Cells with Temporal Dynamic Graph Neural Network
Abstract: In modern homes, people want good comfort and also less electricity bill, so managing heating load and cooling load become very important. Heating Load (HL) and Cooling Load (CL) depend on many things like wall material, window size, sunlight, ventilation, and weather. Because of this many factors, calculation and optimization of HL and CL is little difficult and many time normal formulas give wrong or not perfect results. So in …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 · pp. 12–19 Read article
-
Experimental testing of spring for absorption of sudden impact on spring (Transmissibility)
Abstract: Shock absorber is used to sustain & absorb the shock & jerk during working / running condition of machine / Vehicle. This test rig is used to study performance of shock absorber at different operating speeds. This paper presents systematic Experimental investigations increasing dynamic load suspension system (coil spring). One of the major differences of this study from previous work is that it includes parametric sensitivity analysis in order to …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 28–32 Read article
-
Investigation of Inter Delamination Properties and Morphological Analysis of Natural Fiber-Reinforced Polymer Matrix Composites
Abstract: AbstractNatural fibers are strong, light weight, renewable, cheap, completely or partially recyclable, and biodegradable. The various types of natural fibers are flax, cotton, jute, sisal, kenaf pineapple, bamboo, banana, wood, etc. In this work, sisal fibers and banana fibers have been employed as the main reinforcing materials with epoxy resin as the matrix in order to increase the effectiveness of natural fiber-reinforced polymer matrix composites. In this study, it is …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 1–7 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Numerical and Experimental Investigation on I-type Damage Evolution in Glass Fiber Reinforced Laminates Subjected to Quasi Static Loading
Abstract: Glass fiber reinforced polymer composites has become more popular material used in aerospace and marine structural applications due to their specific strength and anti-corrosion properties. The present work discusses the numerical and experimental investigation on I-type damage evaluation in glass fiber reinforced laminates under quasi-static loading is presented. Three volume fraction of glass and resin (40/60, 50/50 and 60/40) plies were selected for both numerical and experimental damage analysis. The …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 3, 2017 · pp. 27–33 Read article