Search
529 articles for “Thermally Developing”
-
Experimental Investigation of Heat Transfer Enhancement Using Cross Inserts Having Different Pitch Rectangular Cuts
Abstract: This work presents experimental investigation of heat transfer enhancement using strip insert with cross configuration having rectangular cut. The heat transfer enhancement study in a circular copper tube of 10 mm internal diameter is carried out using three different inserts. The three inserts are of cross configuration with rectangular cuts of different pitches. The heat transfer enhancement in hydro-dynamically developed and thermally developing fluid region is studied. It is found …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 2, 2014 · pp. 1–6 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Recent Developments in Solar Photovoltaics and Thermal Hybrid Technology
Abstract: The electrical performance of solar PV panel decreases with increase in the panel/module temperature which is cause of concern in the summer season. To decrease the effect on electrical performance due to increase in module temperature, heat is extracted from the module and used as thermal energy. Heat exchanger or heat extraction device is put on the rear surface of the PV panel and working fluid or coolant is flowed …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 6, Issue 1, 2015 · pp. 14–34 Read article
-
Exploration of Different Microcantilever Geometries for Thermal Sensing using COMSOL and Development of ANN Model
Abstract: In this paper, modeling and simulation results of a thermal sensor which is capable of producing increase in length and deformation with increase in temperature is analyzed. Different geometries of a microcantilever beam are accounted. Further, the simulated results are used to develop an artificial neural network (ANN) model of slotted triangular type of microcantilever. A comparative study of COMSOL and ANN results of different types of cantilever models is …
Published in Recent Trends in Sensor Research & Technology · Vol. 2, Issue 1, 2015 · pp. 5–10 Read article
-
Design and Construction of a Thermosiphonic Solar Photovoltaic – Thermal Water Heating System for Sustainable Development in Temperate Regions of Africa
Abstract: AbstractThe atmospheric temperature of some temperate regions of Africa is mostly about 30–45°C, it incites 30–80°C heat over the panel since black body of the PV panel observes more heat, and this temperature affects the electrical efficiency of the panel. The importance of energy availability in the economic growth, social and political development for every nation cannot be overemphasized. Affordable and reliable energy availability is the precondition for sustainable development. …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 3, 2017 · pp. 1–8 Read article
-
Development of Graphene Based Super Strong and Thermal Resistant High Nano Composite Materials
Abstract: The main goals of the research is to present the investigation in graphene based super strong and thermal resistant nano composite material and study their structural and mechanical properties after intensive severe plastic deformation. It is observed that the mechanical properties of graphene based super strong Nano composite materials show an intensive severe plastic deformation as accumulative roll bonding process was changed. Severe plastic deformation refined grains in the aluminium …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 9–14 Read article
-
Current Status of Thermal Spray Coatings for High Temperature Corrosion Resistance of Boiler Steel
Abstract: In the thermal power plants, the conventional steels used in boilers are unable to sustain the hot corrosion issues. To reduce the problem of hot corrosion in the boilers, many types of surface coatings have been used in the recent past. Thermal spray techniques have been used to develop these coatings on the components of boilers. Thermal spray coating techniques are important means to develop coatings to increase the corrosion …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 29–35 Read article
-
Review on Design and Development of Cleaning and Cooling System for 15 kw (Thermal) Down Draft Gasifier with Producer Gas Analysis
Abstract: In this global world, energy crisis is increasing day-by-day, but fulfilling of that energy by conventional energy generation produces pollution problem and it is also costly. The process of biomass gasification was carried out in a downdraft gasifier by using different biomass like neem wood, babul wood, coconut coir and sugarcane bagasse as feed materials. The product gas or syngas produced was studied by varying parameters like temperature of operation, …
Published in Journal of Thermal Engineering and Applications · Vol. 3, Issue 2, 2016 · pp. 31–37 Read article
-
Fabrication and Parametric Analysis of Thermal Sensing Dielectric PZT Thick Film Nano Ceramic Device Developed by SOL GEL Technique
Abstract: AbstractExtensive investigation carried out during earlier half of twentieth century, prominently established that the ionic radius of an atom gets reduced to significant levels with decrease in coordination number. The findings of Goldsmith and Pauling showed that ionic radii contracts by 4, 6 and 12% when coordination number is reduced from 12 to 8, 6 and 4 respectively. It is obvious that coordination number reduction takes place at the surface …
Published in Research & Reviews : Journal of Physics · Vol. 4, Issue 1, 2015 · pp. 31–37 Read article
-
Development and Validation of RP-HPLC Method for Determination of Thermal Degradation Impurity in Macrolide Immunosuppressant Substance and Drug Product
Abstract: The present study describes a simple and stability-indicating reverse phase high-performance liquid chromatography (RP-HPLC) method for the quantification of the thermal degradation impurities of Tacrolimus (FK506) namely Ally ester rearrangement impurity (Impurity R) in Tacrolimus capsules and drug substances. Successful separation of impurity R from Tacrolimus, its other related substances and its tautomers were achieved on a Zorbax XDB C8 (150×4.6 mm, 5 μm) and detector of UV at 210 …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 3, Issue 1, 2016 · pp. 14–19 Read article
-
Modeling Cogeneration System in Shallow Geothermal Installations
Abstract: This paper presents a theoretical modeling of a cogeneration system using multiple heat exchangers and thermoelectric generator. The modeled system, designed for shallow geothermal energy, is a closed piping unit containing water as heat transfer fluid that circulates through a closed loop releasing thermal energy at the surface for heating and sanitary hot water. In addition, a Peltier cells array is attached to the piping system to generate electricity, thus …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 11, Issue 3, 2020 · pp. 13–23 Read article
-
Flame Spraying of Polymer-Abrasive Composites
Abstract: Polymer-based abrasive tools are distinguished by higher elasticity and resistance to chemically active media compared to tools with metal and ceramic binders. The former are effective at processing complex-profile and non-rigid surfaces. Tools based on coatings containing abrasive phenol- formaldehyde/epoxy resins and vulcanites are characterized by high cost and toxicity. In this paper, a study of composite flame-sprayed coatings, consisting of thermoplastic polymers and silicon carbide (volume ratio of 50-50), …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 96–104 Read article
-
Finite Element Analysis of Steam Turbine Components for Real Life Assessment Studies of 210 MW Steam Turbine
Abstract: The turbine rotor or steam turbine rotor is subjected to temperature variations in short periods of time due to the start and stop cycles of the turbine. This causes sudden changes in the temperature with transient thermal stresses being induced into the turbine rotor. The transient effect is due to the changes in the material properties like density, specific heat and Young’s modulus. The estimate of thermal stresses induced in …
Published in Trends in Mechanical Engineering & Technology · Vol. 2, Issue 2, 2012 · pp. 6–16 Read article
-
Indoor Thermal Comfort Range for Naturally Ventilated Residences in Warm and Humid Climate of Mumbai, Maharashtra, India
Abstract: Every third house in Indian cities will have an air conditioner by 2030, this poses great challenges of energy consumption and related emissions. 68.7% of the total GHG emissions in India (2014) are by energy sector, and half of that were due to electricity and heat generation. As the energy demand in India is expected to become 3.5 times from 2014 to 2030, it is important to reduce the energy …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 1, 2021 · pp. 42–62 Read article
-
Development of a Steady State Temperature Distribution Code (STD 1.0) for Predicting Thermal-Hydraulics Parameters of MNSR
Abstract: A steady-state temperature distribution code has been developed using Visual Basic 6.0 programming language for the estimation of steady-state temperature distribution in an averaged fuel element of Miniature Neutron Source Reactor. The STD 1.0 code is composed of three parts: Main Menu Window which shows the title of the code, picture of the Nigeria Research Reactor-1 in operation and the link to the other two windows; Radial Temperature Distribution Window, …
Published in Journal of Nuclear Engineering & Technology · Vol. 3, Issue 2, 2013 · pp. 1–13 Read article
-
Development of Environmentally Sustainable Epoxy Composites with Sunflower Seed Husk Fillers and Study on Thermal and Moisture Properties
Abstract: This study examines the development and characterization of epoxy composites reinforced with sunflower seed husk (SSH) fillers fabricated using the compression molding technique. SSH fillers were categorized into two distinct particle size distributions, namely, 4–53 µm and 79–463 µm, and were incorporated into the epoxy matrix at varying volume fractions ranging from 5% to 20%. The water absorption behavior of the composites was assessed according to ASTM standards, and thermogravimetric …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 28–37 Read article
-
Development of a Polymer-Encapsulated IoT-Based Sensor for Thermal and Electrical Protection of EV Batteries
Abstract: Electric Vehicles (EVs) mark a critical shift toward sustainable transportation, with Battery Management Systems (BMS) playing a vital role in ensuring battery safety, reliability, and efficiency. The proposed BMS in this project incorporates real-time charge monitoring, temperature sensing, and fire detection capabilities to address safety concerns associated with lithium-ion batteries. Key features include current and voltage tracking, State of Charge (SoC) estimation, fault detection, and a user-friendly LCD interface. By …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 582–591 Read article
-
Studies on Effect of Varying Geometric Parameters of Solar Receiver Tube on Thermal Loss Suffered By It
Abstract: AbstractThe radiative and convective heat losses from a solar receiver tube at a given operating temperature are a function of temperature of the outer glass envelope and outer surface area of the glass envelope. But the temperature of the outer glass envelope and its outer surface area are themselves a function of outer diameter of the heat pipe enclosed within the glass envelope and the annular gap between the outer …
Published in Research & Reviews : Journal of Physics · Vol. 4, Issue 1, 2015 · pp. 10–21 Read article
-
Thermal Engineering: Principles, Evolution, and Comparative Analysis with Classical Approaches
Abstract: Thermal engineering is the study of heat transfer, thermodynamics and energy conversion systems. However, through the years it has progressed from classical theories, which relied on empirical correlations, to enhanced computed and nanotechnology based approaches. This paper highlights the principles of thermal engineering, its important systems and latest developments of thermal engineering and provides extensive comparisons between the classical (traditional) methods and the most recent developments or innovations such as …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 2, 2026 Read article
-
Development of a Generative AI Model for Early Detection and Prevention of Electrical Faults in Thermal Power Plants
Abstract: Electrical faults in thermal power plants can lead to severe equipment damage, production downtime, and safety hazards if not detected in advance. This study presents the development of a Generative Artificial Intelligence (GenAI) model for the early detection and prevention of electrical faults using predictive analytics. The proposed framework integrates Generative Adversarial Networks (GANs) with deep learning (CNN) and machine learning algorithms (Random Forest, Logistic Regression) to enhance data diversity, …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 45–54 Read article