Search
602 articles for “Pneumatic Fitting & Tubing”
Nothing matched all of your words, so these match any of them.
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 859–873 Read article
-
Geometrical, Numerical and Materialistic Parameters used for Studying and Reducing Tube-Side Flow Inconsistency in Tube and Shell Heat Exchangers: An Overview
Abstract: A Shell and Tube Heat Exchanger (STHE) exchanges heat between two fluids flowing at different temperatures. More than 60% of the market is occupied by STHE’s out of all the different kinds of heat exchangers. Maldistribution is the uneven fluid flow distribution in the tubes of the STHE. The aim of this study is to provide a detailed review on the various methods used by researchers for reducing the maldistribution …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 603–621 Read article
-
Possible Risk Factors Associated with Tuberculosis Treatment Failure Among Patients Attending Tuberculosis Treatment Centers in Kano State, Nigeria
Abstract: The widespread failure of tuberculosis chemotherapy has led to an increase in mortality and morbidity associated with tuberculosis infection. This study was aimed at assessing the possible risk factors associated with tuberculosis treatment failure in patients attending Aminu Kano Teaching Hospital (AKTH) and Infectious Disease Hospital (IDH), Kano State. Treatment outcomes of the 436 tuberculosis patients attending selected hospitals in 2018 were obtained using a retrospective study (review of the …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 13, Issue 2, 2023 · pp. 1–9 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Numerical Analysis of Tube Fitted with Internal Baffles used in STHEx
Abstract: A numerical simulation was carried out for heat transfer in a circular tube fitted with rectangular internal baffles using CFD software. The Reynolds number and Prandtl number were varied in the range from 20 to 2000. In-house CFD solver is used for solving Navier-Stoke’s equation coupled with energy equation for internally fitted baffles as a computational domain. The baffles are attached alternately up and down equally spaced on the walls …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 46–54 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Assessment of Loneliness and Depression Status of Tuberculosis Patients Who Applied to Sakarya Tuberculosis Control Dispensary
Abstract: Background: This study was planned by using a descriptive and cross-sectional research model in order to examine the loneliness and depression status of tuberculosis patients who applied to Sakarya Tuberculosis Control Dispensary. Materials and Methods: The study was carried out with 100 tuberculosis patients who applied to Sakarya Tuberculosis Control Dispensary between September 2016 and February 2017, after obtaining institutional permission and ethics committee approval. Analysis of data collected using …
Published in Journal of Nursing Science & Practice · Vol. 10, Issue 1, 2020 · pp. 1–7 Read article
-
An Experimental Investigation towards Optimizing the Geometry and Material of Vortex Tube
Abstract: The main interest of this study is to know the effect of tube material having different thermal conductivities, on the performance of the vortex tube energy separation. Also, the study evaluates the optimal tube length to diameter ratio (L/D) and the effect of inlet pressure on the performance of the vortex. Experimentation consists of three different tube materials, Acrylic, Aluminium and Copper. By maintaining the tube diameter 20 mm as …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 1–9 Read article
-
GeneXpert MTB/RIF Assay (PCR Mycobacterium Tuberculosis): A Revolution in Management of Tuberculosis
Abstract: Background: Workup of pulmonary tuberculosis depends upon sputum microscopy. Sputum microscopy is less sensitive, human resource dependent and time consuming. Sometimes, it lead us to a delay in the diagnosis and may result in the spread of the disease. This seriously disturbs TB control program. There is a need for a more sensitive method. Similarly, early detection of rifampicin resistance is also of utmost importance to prevent MDR strains from …
Published in Research and Reviews : A Journal of Immunology · Vol. 8, Issue 2, 2018 · pp. 8–12 Read article
-
Application of Evaporative Cooling in Mushroom Farming: A Tube in Tube Type Evaporative Cooler
Abstract: The effort focuses on mushroom production using evaporative cooling. It has various advantages over conventional cooling techniques, including the ability to drop the temperature based on environmental conditions, the usage of 80 percent less energy than air conditioning, and the cost and maintenance requirements. With proper preparation, evaporative cooling in agriculture can assist lower the temperature and high relative humidity. Also, it helps in storing goods in cold storage using …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 1, 2022 · pp. 25–29 Read article
-
Design and Development Pneumatic Operated Washer Making Machine
Abstract: This research article presents the advanced method design and development of pneumatic operated washer making machine. The pneumatic system has gained a large amount of importance in last few decades. This project work mainly includes the main components of designs of pneumatic operated washer making machine such as: design of cylinder, selection of direction control valve, and selection of tube, design of aluminum sheet, plastic sheet, tar felt sheet and …
Published in Trends in Machine design · Vol. 4, Issue 3, 2017 · pp. 12–20 Read article
-
Pathogenesis and Treatment of Tuberculosis (T.B) Disease
Abstract: Tuberculosis (TB) is an infectious illness spread through the air that is caused by organisms from the Mycobacterium tuberculosis complex. M. tuberculosis is a lung infection in primary stage, but it can infect any area of the body. M. tuberculosis infection can progress from latent TB infection, in which the bacteria are isolated within granulomas, to infectious infection, in which the patient develops symptoms such as cough, fever, night sweats, …
Published in Research and Reviews : A Journal of Immunology · Vol. 11, Issue 3, 2021 · pp. 42–48 Read article
-
Pneumatic Car: Solution to Fossil Fuels
Abstract: AbstractUse of conventional source of energy such as petrol, diesel etc. has rapidly affected the environment by means of rapid emission of greenhouse gases such as NOx, SOx,CO2 etc. These modern sources of energy are readily available thus their consumption has increased over the years and it is assumed that after 30 years these conventional sources of energy will be completely exhausted from the modern arena, also there will be …
Published in Journal of Industrial Safety Engineering · Vol. 5, Issue 1, 2018 · pp. 18–27 Read article
-
Comparative Study of Seismic Performance of Conventional Tube Structures and Diagrid Structure
Abstract: AbstractConstruction of tall building is rapidly increasing throughout the world. Advances in construction technology, structural systems, analysis and design software facilitated the growth of the buildings. Recently, the diagrid structural system has been widely used for tall buildings due to the structural efficiency and aesthetic potential provided by the unique geometric configuration of the system. The “diagrid” is a combination of the two words i.e. diagonal and grid which form …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 32–38 Read article
-
Assessment of exacerbation of Depression in pulmonary tuberculosis patients by using PHQ-9 scale at Tertiary Care Hospital
Abstract: Context: Depression leads to more dysfunction and stress, which could affect the patient's life condition. Tuberculosis is a leading cause of comorbidity with depression. Those suffering from tuberculosis and depression are at higher risk of bad health-seeking nature, resulting in higher morbidities, drug resistance, and mortality. The relationship is not well established. Aims: To identify multiple variables/ dependent factors affecting depression respectively in tuberculosis patients and check the medication adherence …
Published in International Journal of Pathogens · Vol. 1, Issue 2, 2024 · pp. 24–31 Read article
-
First Insights into Whole Genome Sequencing of the Mycobacterium tuberculosis Complex: Molecular Diversity and Drug Susceptibility Patterns in Senegal
Abstract: Background: We conducted a bibliographic analysis of the Mycobacterium tuberculosis complex (MTBC) in sub-Saharan Africa, which included the analysis of 8,139 genomic sequences from 34 of the 49 sub-Saharan African countries. Notably, only one complete sequence from Senegal was identified, which had been generated in the United States. Our primary objective was to utilize whole genome sequencing (WGS) to detect resistance in anti-tuberculous strains of the MTBC in Senegal. This …
Published in Recent Trends in Infectious Diseases · Vol. 2, Issue 1, 2025 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Design and Analysis of Vortex Tube
Abstract: AbstractNowadays refrigeration plays a vital role in our day to day life for the preservation of food, medicine, and air conditioning. In the current situation conventional refrigeration system most of the time uses freon as a refrigerant. Which is mainly responsible for the depletion of the ozone layer and hence it indirectly affects the health of the human being. To overcome all these difficulties vortex tube can be used as …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 30–36 Read article