Search
148 articles for “MPa”
-
Strategic Enhancement of Composite Strength Explored Through Comprehensive Integration of Flax Fiber and Cenosphere in Epoxy Resin Matrices
Abstract: The Current research delves into the mechanical attributes of composite specimens, integrating flax fiber and cenosphere fillers within an epoxy resin matrix catalyzed by K-6 hardener. Executing a meticulous approach involving a vacuum bagging method and a specific formulation of 10 wt.% cenosphere, 50% epoxy resin, and 40% flax fibers, the study rigorously scrutinized tensile and flexural strengths. Notably, the first specimen exhibited a peak tensile strength of 94.329 MPa, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 199–217 Read article
-
Geopolymer Concrete Composites and its Properties- A Clean and Sustainable Development
Abstract: Production of geopolymer composites, an inventive and environmentally friendly substitute for regular Portland cement concrete, involves the polymerization of several industrial waste materials, including fly ash, powdered granulated blast furnace slag, silica fume, and rice husk ash, using solutions that are very alkaline. Because this technique removes the requirement for calcination, which is a significant contributor of CO2 emissions during the manufacturing of OPC, GPC is more ecologically friendly. Alkaline …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 284–300 Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article
-
Comparative Analysis of Different Mechanical Properties of Banana Pseudostem Fiber and Pineapple Leaf Fiber Reinforced Polymer Composite
Abstract: In this research, a hybrid natural fiber polymer composite is prepared using different combinations of banana pseudostem fiber and pineapple leaf fiber in a discontinuous reinforcement phase and epoxy polymer in a continuous matrix phase. For the preparation of the composite, the hand layup technique is used and important mechanical characteristics, namely tensile, flexural, and impact strength, are determined. The findings of this investigation represent that the highest values of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1248–1256 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Evaluating The Durability and Environmental Sustainability of Hybrid Natural - Synthetic Fiber Composites
Abstract: This study examines the characteristics of hybrid composites composed of natural fibers (such as jute, hemp, or kenaf) and synthetic fibers (such as glass or carbon) integrated within polymer matrices. The hybridization method seeks to enhance the advantages of both fiber types, hence augmenting overall performance relative to single-reinforced composites. Mechanical properties like tensile strength, flexural strength, impact resistance and hardness were evaluated through experimental tests. The results demonstrate that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 93–102 Read article
-
Graphene-Derived Reinforced Polymer Composites for Self-Healing and Durability Enhancement in Concrete Structures
Abstract: This study presents a matrix-centric polymer-composite repair binder: an epoxy–polyamide network reinforced with graphene derivatives (GO/rGO, 0.1–1.0 wt%). The polymer drives function via segmental mobility that closes microcracks, while 2D-filler topology densifies the interphase, improves load transfer, and enforces tortuous moisture pathways. Adhesion was high: pull-off (ASTM D4541) reached 13.5 MPa at 2.0 mm displacement; slant-shear (ASTM C882) reached 12.1 MPa at 2.8 mm, with greater deformation capacity (zero stress …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 77–91 Read article
-
Cementing Sustainability: Utilizing Waste Foundry Sand to Enhance Concrete Performance and Reduce Environmental Impact
Abstract: The incorporation of waste foundry sand into concrete production represents an environmentally conscious and cost-effective approach. This method involves substituting discarded foundry sand for a portion of traditional fine aggregates in concrete mixtures. The primary objective is to address environmental concerns associated with waste disposal while simultaneously achieving cost efficiency in construction materials. By integrating waste foundry sand into concrete, this practice promotes sustainability by reducing landfill waste and conserving …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 13–21 Read article
-
Mechanical and Morphological Analysis of Jute/Manila Hemp Hybrid Composites for Enhanced Structural Performance
Abstract: Natural fiber composites are renowned for their lightweight, strength, corrosion resistance, and high strength-to-weight ratio, often surpassing traditional metals. Despite challenges such as poor fiber-matrix adhesion and moisture susceptibility, hybridizing composites present a viable solution by enabling tailored properties for optimal performance. This study investigates hand-lay-up processed natural fiber composites, specifically woven jute/epoxy, non-woven manila hemp/epoxy, and their hybrid variants. Extensive testing was conducted on mechanical properties including hardness, flexural …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 1–11 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Harnessing Marine and Agro-Waste Resources: Bioengineered Seaweed Polysaccharide–Coconut Films for Next-Generation Sustainable Packaging
Abstract: The increasing demand for biodegradable alternatives to petroleum-based plastics has led to significant interest in marine biopolymer-based packaging materials. This study focuses on the development of eco-friendly biocomposite films by reinforcing carrageenan, extracted from Kappaphycus alvarezii, with alkali-treated coconut at varying loadings (5%, 10%, and 15% w/w). The films were fabricated via solvent casting and subjected to comprehensive characterization. Mechanical analysis revealed substantial enhancement in tensile strength from 21.3 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 217–227 Read article
-
Evaluation of Mechanical Properties of Terminalia Chebula and Teak Wood Sawdust Reinforced Polymer Hybrid Composites
Abstract: This study examines the mechanical characteristics of polymer hybrid composites augmented with sawdust from teak wood and Terminalia chebula (Kadukkai). To examine their effects on mechanical performance, the composites were made with different percentages of biofiller (10%, 20%, 30%, 40%, and 50%) while keeping the proportions of the two reinforcements same. Tensile, flexural, and impact tests were performed to assess their strength properties. The findings showed that flexural strength varied …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 469–476 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Neuroinflammation Is Aggravated by the Aqueous Extract of Myrmecodia Platytyrea Tuber
Abstract: Myrmecodia platytyrea, commonly known as the ant plant, is a medicinal epiphyte traditionally used in Southeast Asia for its purported health benefits, including anti-inflammatory, antioxidant, antimicrobial, and anticancer activities. Its tuber contains abundant secondary metabolites, including flavonoids, tannins, phenolic compounds, and saponins. While these phytochemicals are generally associated with therapeutic effects, the biological activity of Myrmecodia extracts varies depending on the type of extract, dosage, and route of administration. In …
Published in International Journal of Brain Sciences · Vol. 3, Issue 1, 2026 · pp. 5–14 Read article
-
Development and Evaluation of Hybrid Natural Fiber Composites
Abstract: Natural fiber based polymer composites are becoming more common because they are cheap, sustainable, and operate effectively across mechanical and environmental settings. Natural fibers (NFs) like bamboo and roselle are being used to strengthen polymer composites. They are being used in textiles, medical equipment construction, and car making. People are becoming more interested in these fibers because of the unique properties. Bamboo fiber is an effective option for reinforcement in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 908–915 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article