Search
32 articles for “Chloride solution”
-
Aluminum and its Alloys to Recover from Corrosive Weather
Abstract: Corrosion is defined as deterioration of material, usually metal, because of reaction with its environment and which requires presence of an anode, a cathode, an electrolyte and an electrical circuit. Aluminum and its alloys are reactive to weather of exposure, e.g. ambient, acid and alkalis. Solid to pigments are prevented from corrosion by using inhibitors. Organic inhibitors are ever praised due to non-toxic performances. Basic processes are surface adsorption to …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 7–19 Read article
-
Anodic Polarization Study on Steel Bar in Concrete Powder Solution Extracts Contaminated with Chloride and Sulfate Salts
Abstract: In present work, anodic polarization tests are conducted on different steel specimens to find out corrosion zone potentials of various corrosion zones. The tests are done in the concrete powder solution extracts contaminated with the varying levels of admixed chloride and sulfate salts, at varying w/c ratios and cement types. The admixed chloride content is fixed at 3.5% and the sulfate content is used as 0, 2.5 and 5%, by …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 22–28 Read article
-
Durability Assessment of Geopolymer and OPC Concretes under Chloride and Sulphate Chemical Attack
Abstract: The main problems with durable concrete constructions are attacks by sulphates and chlorides on concrete. The primary objective of this study is to evaluate how the strength properties of concrete are affected by the incorporation of fly ash when exposed to environmental conditions involving sulphate and chloride solutions. In this research, geopolymer concrete (GPC) is utilized as a replacement for conventional ordinary Portland cement (OPC). The concrete composition is prepared …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 202–218 Read article
-
Dynamic deformation and microstructural characteristics of AA5083 under the influence of electrochemical behaviour using equal channel angular pressing
Abstract: Large-scale Equal channel angular pressing is a great engineering material that has more potential for AA5083 industrial applications. Uniaxial dynamic compressive tests across a temperature of 448 K were conducted for the ECAP technique AA5083 in order to create such a design framework. The microstructure was described using transmission electron microscopy and scanning electron microscope both before and after dynamic loading. The plastic flow behaviour of the AA5083 was described …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 95–112 Read article
-
Electrodeposition and Magnetron Sputtering of Rhenium Coatings on Carbon-Carbon Composites for Enhanced Corrosion Resistance and Structural Integrity
Abstract: It is well known that tailored materials are gaining in-roads to aviation and other manufacturing industries where stringent requirements are to be met, due to high temperature erosion, which is a problem. In order to counter these issues, materials which can resist a very high temperature are to be sought. One of the several methods to combat this high temperature issue is to provide a metallic refractory material coating on …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 35–44 Read article
-
Mechanical Analysis and Advanced Manufacturing of Eco-Friendly Groundnut Shell Powder Reinforced Epoxy Composites
Abstract: Polymer composites reinforced with natural materials are gaining significant attention because of their eco-friendly nature, cost-effectiveness, and favorable mechanical properties. This research explores the creation and mechanical analysis of epoxy composites strengthened with groundnut shell powder (GSP), exploring both untreated and benzoyl chloride-treated GSP variations. The research emphasizes utilizing agricultural waste material while achieving enhanced mechanical properties through surface modification and advanced fabrication techniques. The composites were manufactured using the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 174–185 Read article
-
Effect of Surface Modification on Properties of Kevlar/Epoxy Polymer Composites
Abstract: In this study, a high-performance Kevlar/epoxy polymer composite was prepared using a hand lay-up technique. The Kevlar fiber was treated with calcium chloride/ethanol solution (CaCl2/EtOH) to enhance the interfacial interaction between the fiber and the epoxy matrix. The optimization of fiber surface treatment and fiber content for the best tensile strength (TS) of Kevlar/epoxy polymer composite was achieved using Box-Behnken design (BBD) through response surface methodology (RSM). Three parameters: CaCl2 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 35–46 Read article
-
Diaminoglyoxime Palladium (II) Chloride As An Efficient Catalyst for the Suzuki-Miyaura Cross-Coupling Reaction under Aerobic Conditions in H2O/EtOH Solution
Abstract: The preparation of diaminoglyoxime palladium (II) chloride (PdCl2/DAG complex) and the use of this catalytic system in Suzuki-Miyaura cross-coupling reactions under aerobic and phosphine-free conditions in aqueous solutions is studied. Aryl halides, coupled with phenylboronic acids smoothly afford the corresponding cross-coupling products with excellent yields (80–98%). The catalytic system showed excellent performance for the Suzuki-Miyaura cross-coupling reaction of less reactive aryl chlorides with aryl boronic acids. The reaction conditions have …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 2, 2014 · pp. 35–43 Read article
-
The Effects of Dissolved Sodium Chloride (NaCl) on Well Injectivity during CO2 Storage into Saline Aquifers
Abstract: Among different options proposed for carbon dioxide (CO2) storage and sequestration, saline formations seem promising due to their wide availability and potentially large storage capability. As supercritical (SC) CO2 is injected into the formation, a variety of coupled processes takes place. Halite precipitation requires particular interest due to its potentially significant impact on permeability impairment, and thus reduction of injectivity in the near well bore region. The selected candidate for …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 11–22 Read article
-
Waste Plants as a Green inhibitor for Reinforced Concrete
Abstract: AbstractIn recent years, the use of inhibitors in producing high performance concrete has increased significantly as a result of chloride and sulfate attacks. The present inhibitors in market are toxic to the environment. Hence, the objective of the present investigation was to study a novel, eco-friendly and a hydrophobic green plant extracts’ inhibitor (rice husks) and study the effects of it on compression strength of reinforced concrete. The inhibitor above …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 53–58 Read article
-
Investigating the Influence of Process Parameters on Photochemical Machining of Phosphor Bronze Alloy Microchannels
Abstract: Microchannels are widely employed in microfluidic devices, biomedical systems, and compact heat exchangers, where their functional efficiency depends strongly on surface finish, dimensional control, and edge quality. Traditional machining techniques often face limitations in producing such features with the required precision, prompting the use of advanced micromachining methods. In the present work, photochemical machining (PCM) has been applied to fabricate serpentine-shaped microchannels in phosphor bronze. The study systematically investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 837–846 Read article
-
Effect of Spray Pyrolysis on the Properties of Chemically Sprayed CuO:Al Thin Films
Abstract: AbstractCuO:Al thin films were grown from 50 ml of spray solution on glass substrates by chemical spray at Ts=400°C using solution spray doping percentages of 0, 4, 5 and 6%. Copper acetate and aluminium chloride were used as Cu and Al sources, respectively. Independent of solution spray rate, the crystallites in CuO:Al films grow preferentially in the (201) plane, parallel to the substrates. The spray pyrolysis solution are using different …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Optimization of Polymer-Enhanced Sustainable Concrete: A Composite Approach with Bentonite and Crumb Rubber Aggregates
Abstract: The disposal of rubber tyres has become challenging; on the other hand, the utilization of rubber tyres is also increasing daily in society. The successful use of crumb rubber as an alternative aggregate and bentonite as a partial cement replacement in concrete composites has been well established through prior research. These materials have individually demonstrated their potential to enhance sustainability, improve concrete properties, and reduce environmental impact, paving the way …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 701–715 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article
-
Improving Environment Health through E-Waste Management
Abstract: The rapid growth in technology leads to “replacement market” in developing as well as developed nations. Due to this electrical and electronic waste (E-waste) is increasing day by day and it is of great concern. Environmental health issues and other related issues are making the scientists and technologist to think over it and come with some concrete solutions. This paper talks about these issues and also suggests some corrective steps …
Published in Journal of Microcontroller Engineering and Applications · Vol. 4, Issue 1, 2017 · pp. 4–6 Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 1–7 Read article
-
Influence of Agricultural Waste Materials in Concrete: A Sustainable Approach
Abstract: Urbanization and resource depletion have intensified the need for sustainable alternatives to traditional construction materials. The concrete industry, a major contributor to environmental issues due to cement production, is turning to waste materials to mitigate its impact. This review paper focuses on the use of agricultural waste as a partial replacement for cement and aggregates in high-strength concrete (HSC), with an emphasis on its influence on both fresh and hardened …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 26–32 Read article
-
Use of NMR and Other Spectroscopy Techniques in Heterocyclic Oxadiazole Derivatives Studies: A Review
Abstract: It was possible to create a number of novel symmetrical 2,5-dialkyl-1,3,4-oxadiazoles with substituents including carboxymethylamino, isopropyloxycarbonylmethylamino, and bromine at the terminal positions of the alkyl groups. The multistep process that was devised used hydrazine hydrate, phosphorus oxychloride, and commercially available acid chlorides that varied in alkyl chain length and terminal substituent.Diisopropyliminodiacetate was an easy way to substitute the intermediate bromine-containing 2,5-dialkyl-1,3,4-oxadiazoles. This was followed by hydrolysis in an aqueous methanol …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 1, 2024 · pp. 07–13 Read article
-
Synthesis, Characterization, and Reactivity of Bivalent Tin(II) with 4-Tert-butylphenol
Abstract: Bivalent tin(II)-4-tert. butylphenoxide of composition Sn(OC6H4X-4)2(I), where X = But, has been synthesized by the reaction of stannous chloride (SnCl2) with bimolar amounts of 4-tert. butyl phenol (HOC6H4But-4) in the presence of the base, diethyl amine, in tetrahydrofuran (THF) solvent. The resulting complex was characterized by elemental analysis, molecular weight determination, molar conductance measurement, IR, and 1H NMR spectral studies. The reactivity of the newly synthesized complex (I) with HgCl2 …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 1, 2024 · pp. 14–19 Read article