Search
64 articles for “ASTM standard”
-
Mechanical Testing Under Tensile-load
Abstract: Mechanical testing is a technique used to establish a material's mechanical qualities by examining its strength, toughness, hardness, and other characteristics. Specimens produced of various materials whose qualities need to be examined are used to verify this property. In which a static load is applied and a dynamic load is applied, and the test is completed. Understating loads in mechanical testing is the topic of this research article. Any manufacturing …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 1–10 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Experimental Investigation of Various 3D Printing Materials for Making Travel Bag Wheels
Abstract: 3D printing is one of the emerging areas of manufacturing. Fused deposition modelling (FDM) is widely used 3D printing technique in various fields like jewellery, fashion, art and sculpture, medical, etc. In this paper, different polymer materials like ABS (Acrylonitrile Butadiene Styrene), PLA (Polylactic Acid), carbon fibre, PETG (Polyethylene Terephthalate), HIPS (High Impact Polystyrene), etc. were analysed for compressive strength by preparing standard specimens according to ASTM standard D695 to …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 1–7 Read article
-
Comprehensive Introduction: Epoxy and Polyurethane Floor Coatings—A Critical Evaluation for Modern Industrial Applications
Abstract: Industrial flooring systems are essential for ensuring operational durability, safety, and longevity in demanding environments. Epoxy and polyurethane (PU) coatings represent two predominant technologies, each offering distinct mechanical, chemical, and aesthetic profiles tailored to specific performance requirements. Epoxy systems, formed through the crosslinking of bisphenol-A-based resins with amine hardeners, excel in high-strength, chemically aggressive settings due to their superior hardness, adhesion, and chemical inertness. In contrast, PU coatings, synthesized from …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 14–23 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites Read article
-
Productions and Characterization of Biodiesel by Base Catalyzed Transesterification Reaction from Dairy Waste Scum of DEI Dairy, Agra
Abstract: With the increase in prices and rapid depletion of petroleum-based fuels, the investigation is being done to look over an alternative fuel source. Presently, the biodiesel is mainly produced from vegetable sources such as jatropa oil, karanja oil, rapeseed, soybean, and others that could overlap with nutritional requirement of the society if produced at large scale. Also, the production cost of biodiesel from vegetable and animal sources is very high …
Published in Research and Reviews : Journal of Dairy Science and Technology Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article
-
Design Analysis of PALF Natural Fiber Composite Laminate under Tensile Loading Condition using Simulation Approach
Abstract: Plant-based fibre reinforced materials are increasingly being employed for a variety of structural and non-structural purposes. Plant and animal-based fibres have different characteristics depending on a variety of circumstances. Mechanical qualities are primarily determined by parameters such as matrix, fillers, fibre content, fibre treatment, and fabrication techniques. The present work aim in analyzing the PALF natural fiber using simulation approach. In the process laminates are prepared as per ASTM standards …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 2, 2023 · pp. 23–29 Read article
-
Effect of hybridization on mechanical Characteristics of hemp,bamboo and jute reinforced epoxy bio composites
Abstract: In the present study, hemp, jute and bamboo fibres have been reinforced with epoxy resin to develop several bio-composites (hemp/epoxy, jute/epoxy, bamboo/epoxy, hemp/jute/epoxy, hemp, bamboo, epoxy and hemp/jute/bamboo/epoxy). Their mechanical characteristics (impact strength, flexural strength, and tensile strength) have been evaluated by conducting standardized ASTM tests on the fabricated bio-composite specimens. Among these, the hybrid epoxy composite reinforced with hemp, jute, and bamboo fibers has exhibited superior tensile and impact …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 81–91 Read article
-
Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites
Abstract: The inclusion of nano B4C particulates in Al-2219-Nano B4C alloy was investigated to understand their impact on hardness and wear characteristics. 500 nm-sized nano B4C particulates are used as reinforcements for structures in the Al2219 alloy matrix. The nanocomposites were fabricated using the two-stage liquid stir melt method with varying weight percentages (2, 4, 6, and 8 wt. %) of Nano B4C in the Al-2219 alloy matrix. Renewable energy dispersive …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 31–38 Read article
-
Optimisation of Biodiesel synthesis process from various edible oils using KOH and NaOH as homogeneous catalysts
Abstract: In the present experimental study, an optimization of biodiesel production from different kinds of edible oils (Palm oil, Cotton-seed oil and Sunflower oil) using KOH & NaOH as homogenous catalyst has been investigated by one step transesterification method. The research study was conducted into two parts. In the first experimental study, different types of edible oils (Sunflower oil, Cottonseed oil and Palm oil) have been optimised using KOH and NaOH …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 69–77 Read article
-
Eco-Friendly Tri-Layer Hybrid Composites: A Sustainable Approach to Polymer Matrix Materials
Abstract: In the current study, we explored the use of environmentally friendly natural fibers such as sisal, banana, and kevlar. These fibers were fabricated by hand lay-up technique, and their impact on tensile and dynamic properties was evaluated according to ASTM standards. The assessment was conducted under both dry and wet conditions, considering two different chemical dosage parameters for comparison. Additionally, the tri-layer fibers underwent two separate chemical treatments using 1% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 195–205 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Optimization of Tensile and Flexural Properties of PETG Filament in FDM 3D Printing Using Response Surface Methodology
Abstract: Now a days manufacturing trend has been changed from subtractive to additive. In additive manufacturing (3D Printing), layer by layer deposition occurs and final product can be obtained. The main advantages of additive manufacturing is to obtain customized product, complex geometry product. This research investigates the optimization of tensile and flexural Strength of PETG filament in Fused Deposition Modeling (FDM) 3-d printing by using of Response Surface Methodology (RSM). Specimens …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 39–58 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Assessment of Sustainable Composite for UAV structural Application
Abstract: Now-a-days aligned with global mission the growth of Unmanned aerial vehicle (UAV) application is enormous in the field of agriculture, defence, surveying etc., This research work investigates the improvement in strength of polymer matrix composite material of adding epoxy polymer resin with novel bio fibers such as Tamarindus and Morinda. The composite material was fabricated by using hand-layup method later its mechanical properties are analysed by numerical method as well …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 359–377 Read article