Search
26 articles for “ANSYS Fluent”
-
Analysis of Submarine Hydrodynamics and NACA Aerofoils Using Ansys Fluent
Abstract: This study investigates the hydrodynamic behaviour of submerged offshore vehicles, including submarine hull and NACA aerofoils through simulation and fluid flow analysis, using ANSYS Fluent. The study models the interaction between fluid flow and offshore submerged vessels i.e. a Standard Submarine Model and various NACA profiles, simulating pressure distributions and drag forces that affect offshore operational stability. The analysis comprises of the study of multiple mesh profiles required to calculate …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 2, 2025 · pp. 48–55 Read article
-
Thermal Management of Different Composites Materials Using a Convergent and Straight Vortex Tube
Abstract: The present study focuses on an in-depth and meticulous exploration into the intricate realm of thermal management in three distinct yet widely utilized composite materials—namely, Liquid Crystal Polymer (LCP) Composites, Glass Fiber Reinforced Polymers (GFRPs), and Aramid Fiber Composites (Kevlar). This investigation employs an innovative counter-flow vortex tube system, meticulously analyzing and comparing the thermal efficiency of these materials under different intake configurations. Specifically, two distinct geometrical intake designs—a straight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 252–266 Read article
-
A Study of The Performance of surface modified NACA 2416 Airfoils at various Angles of Attach at Re80000
Abstract: This study delves into the aerodynamic effects and characteristics of surface-modified NACA 2416 airfoils, placing a greater emphasis on the aerodynamic efficiency of a two-dimensional surface-modified NACA 2416 airfoil under subsonic flow conditions at Re=80000 and various angles of attack (AOAs). The surface-modified airfoils were crafted using CATIA V5, and simulations were conducted in ANSYS Fluent for angles of attack ranging from 0° to 12°.The CFD results encompass a broad …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 34–39 Read article
-
Optimizing Heat Transfer Performance in CO2 Finned-Tube Gas Coolers: A Comparative CFD Study of Design Variations
Abstract: Computational fluid dynamics (CFD) simulations and mathematical analysis are used in this study to examine the heat transfer efficiency of CO2 fined tube gas coolers. To maximize heat transfer efficiency, CFD simulations were carried out on a variety of gas cooler designs with variable fin geometry, including offset strip fins, using the ANSYS Fluent program. Under the baseline design, there was a finned tube cooler measuring 610 mm in length, …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 1–13 Read article
-
Hydrodynamic Analysis of Symmetrical Naca Airfoils: A CFD Simulation Approach
Abstract: This study presents a comprehensive numerical investigation of the hydrodynamic characteristics of selected NACA airfoil profiles using advanced computational fluid dynamics (CFD) simulations performed in ANSYS Fluent. The primary objective is to evaluate the fluid–structure interaction behavior of these airfoils when subjected to marine flow conditions relevant to offshore and submerged engineering applications. By modeling the interaction between incompressible fluid flow and various NACA geometries, the study systematically analyzes key …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 31–38 Read article
-
Rotational Speed Influence on Weld Temperature in Friction Stir Lap Joint of Aluminium Alloy 6061 Using Numerical Simulation
Abstract: The weld quality assessment in friction stir welding depends on the choice of suitable weld parameters. Rotational speed is one such parameter. The study utilizes a computational fluid dynamics model to examine the influence of various rotational on the workpiece and weld interface temperature. The workpiece selected for this study is an Aluminium Alloy 6061, while the tool employed is a truncated conical pin tool featuring a conical shoulder in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 235–245 Read article
-
Fabrication and Testing of Advanced Concrete Made with Carbonized Bio Waste Available Locally: Special Consideration of Waste from Rajasthan
Abstract: In today's world, the construction sector must contend with a number of challenges on account of factors such as increasing urbanization and diminishing natural resources. More ecologically friendly building materials are being produced by industry as a result of increased awareness of the effects of climate change. Among other possible substitutes, rice husk ash (RHA), sugarcane bagasse ash (SCBA), and bamboo leaf ash (BLA) are already being used in the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 571–581 Read article
-
Study and Thermal Analysis of a Rectangular Duct with Z-shaped Baffle Using Ansys
Abstract: This project aims to enhance heat transfer in a rectangular duct by utilizing Z-shaped baffles. It involves creating a 3D CAD model using SolidWorks and validating it in ANSYS Fluent 2019 R2. The study focuses on analyzing the effect of baffle arrangement, height, and angle on heat transfer rate. Comparative analysis is conducted between rectangular ducts with a 60° angle and heights of 4 mm, 6 mm, and 8 mm. …
Published in International Journal of Energy and Thermal Applications · Vol. 1, Issue 2, 2023 · pp. 14–30 Read article
-
Optimizing Heat Dissipation: Analysis of Air Cooled Fins for Electronic Equipments
Abstract: This paper focuses on the thermal management of electronic components in modern technologies like RADAR electronics, UAV and Drone technologies,Automotive Electronic Components etc. The main objective of this research is to design and develop an efficient heat dissipation system, using fins, for an electronic component with dimensions of 80 x 300 mm, dissipating 30W heat. The process starts by calculating essential parameters for fin design, followed by modeling the fins …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 3, 2025 · pp. 26–50 Read article
-
Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature
Abstract: This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the substances that, undergo through a phase transition, such as melting from solid to liquid by absorbing or releasing a significant amount of energy as heat. PCM is advantageous for the thermal control of batteries because of this characteristic. As the battery produces heat, the PCM surrounding it absorbs the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 19–31 Read article
-
Numerical Simulation of Air Flow Field of A Gas Turbine Engine Air blast Atomizer
Abstract: One of the most crucial process that occurs before the fuel is burned in the combustion chamber is atomization. The performance of a engine will be depend mainly on the fuel mixture. Performance of the engine depends on atomization process because it breaks the bulk fuel into small droplets and injects it into the combustion chamber, in order to make this happen consequently the dimensions of most of the fuel …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 169–180 Read article
-
Revealing the Hemodynamic Orchestra: Contrasting Analysis of Blood Flow Patterns in a Bifurcated Carotid Artery
Abstract: Understanding blood flow patterns in the carotid artery (CA) is crucial for detecting cardiovascular diseases. Computational fluid dynamics simulations compared non-Newtonian (non-Newt) and Newtonian (Newt) models under pulsatile and laminar flow. CA geometry was accurately designed using ANSYS Space Claim & Fusion360, and simulations were run in ANSYS Fluent. Discrepancies between non-Newt and Newt models were found, especially in bifurcation's distal regions prone to plaque. Pressure ranged from 27.870 Pa …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 229–247 Read article
-
Optimizing Fin Parameters to Enhance Passive Heat Dissipation in Photovoltaic Panels
Abstract: This study explores passive cooling techniques to enhance the thermal management of photovoltaic (PV) modules, which is crucial for maintaining efficiency. A computational fluid dynamics (CFD) model, using ANSYS Fluent, was developed to evaluate three fin shapes: rectangular, trapezoidal, and triangular, attached to the back of PV modules. The study varied parameters such as fin count, thickness, and length to determine optimal configurations for cooling. Among the designs, triangular fins …
Published in International Journal of Radio Frequency Innovations · Vol. 2, Issue 2, 2024 · pp. 25–35 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Design, Analysis, and Testing of a Carbon Fibre-based Solid Rocket Motors
Abstract: The goal of the research is to simulate the outer shell of a rocket in order to fulfil mission criteria. Case failures can occur for a number of causes, including poor material selection, carelessness in the service conditions, inadequate non-destructive testing during crucial stages of production, and poor design and analysis. For this reason, it is crucial to simulate rockets with precise design and analysis. The study entails the designing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 650–669 Read article
-
Integrated Optimization of Solar Photovoltaic Systems Using Taguchi Method and Computational Fluid Dynamics for Enhanced Efficiency
Abstract: The transition to renewable energy demands efficient and reliable photovoltaic (PV) systems to meet rising global energy needs. This study presents an integrated optimization framework combining the Taguchi method and Computational Fluid Dynamics (CFD) to improve the thermal and electrical performance of solar PV systems. A structured experimental design using an L9 orthogonal array evaluates the influence of three key parameters—material type, panel thickness, and cooling mechanism—on system efficiency. Analysis …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 3, 2025 · pp. 10–25 Read article
-
Numerical Analysis of Straight Wire and Helical Wire wrap 2x2 Rod Bundle with Supercritical Water
Abstract: Investigations using computational fluid dynamics (CFD) have been conducted on a 2x2 rod bundle that has been wrapped with both straight and helical spacer wires. The bundle has been wrapped with both types of spacer wires. There have been investigations conducted in this regard. The wires that have been coiled have been wrapped around another rod bundle that has been looped around them. An examination and investigation into the employment …
Published in Journal of Nuclear Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–5 Read article
-
A Computational Study of Lift and Drag Characteristics for NACA 4415 and NACA 2412 Aerofoils
Abstract: The performance of an aerofoil is crucial in designing wind turbine blades, aircraft wings, and other aerodynamic surfaces. This project presents a comparative analysis of two widely used aerofoil profiles, NACA 4415 and NACA 2412, to study their lift and drag characteristics under different flow regimes. The aerofoil geometries were developed using the NACA four-digit notation and modeled in ANSYS Design Modeler. Numerical simulations were conducted in ANSYS Fluent for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1298–1315 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article