All articles
1475 articles
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Study of pH Behaviour of Slurry on Surface Morphology of Copper Material with Single Pole Magnetic Abrasive Finishing Process
Abstract: The chemical oxidizers—sodium hydroxide, Marshall’s acid salt, and hydrogen peroxide—were effectively employed in the wet polishing of copper using the SPMAF experimental setup. The manuscript explores preparation of slurry used for polishing copper material using single pole magnetic abrasive finishing (SPMAF) framework. The slurry contains distilled water, 1200-grit aluminum oxide abrasives, sodium hydroxide (NaOH), potassium persulfate (K₂S₂O₈), and hydrogen peroxide (H₂O₂), combined in precise amount. Specifically, 100 ml of distilled …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1887–1896 Read article
-
Spin Coated Polyvinylidene Difluoride / Ionic Liquid Nanocomposite Thin Films with Enhanced Dielectric and Piezoelectric Properties
Abstract: This study introduces a novel approach to enhance the piezoelectric and dielectric properties of polyvinylidene difluoride (PVDF) by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) ionic liquid via a spin-coating method— a processing route that has been rarely reported for PVDF/ionic liquid composites. Structural and morphological analyses using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) confirm the successful integration of [BMIM][BF₄] into the PVDF matrix. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1190–1204 Read article
-
Fault Diagnosis of Air Compressor (AC) System using Local Mean Decomposition (LMD) and Logistic Regression (LR) Machine Learning Classifier
Abstract: This article presents a detailed and systematic procedure for performing fault diagnosis in an air compressor (AC) system by analyzing the audio signals generated during its operation. The analysis covers both normal (healthy) conditions and seven distinct types of faults, including bearing failure, flywheel malfunction, inlet valve leakage, outlet valve leakage, non-return valve failure, piston ring defect, and rider belt issues. To acquire the acoustic signals, the researchers utilized a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 416–427 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Polymer Composite Nodes for Smart IoT Environmental Monitoring: Applying ML-Calibrated RF Sensors for Exceptionally Low-Power, Flexible, and Dependable Performance
Abstract: The quick usage of the Internet of Things (IoT) for monitoring the environment needs sensor platforms that are accurate, responsive, adaptable, energy-efficient, and able to work in many different conditions. This work presents polymer composite nodes equipped with machine learning (ML)-calibrated radio-frequency (RF) sensors that adhere to stringent criteria. Sensor substrates built of flexible polymer matrices with conductive fillers are strong, light, and flexible enough to fit on surfaces that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1205–1221 Read article
-
Implement Explainable Machine Learning to Improve Conductivity in Polymer-CNT Nanocomposites: Supporting Adaptive, Flexible, and Long-Lasting IoT Wrap-Around Electronics Applications
Abstract: The rapid growth of Internet of Things (IoT) technologies requires electronic components that are adaptable, lightweight, and durable, and that can continue to function well in diverse contexts and circumstances. Polymer–carbon nanotube (CNT) nanocomposites have become interesting choices for these kinds of uses because they are more flexible, conduct electricity better, and can be made to fit specific needs. However, improving conductivity in these heterogeneous systems remains a major challenge …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 238–254 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Combustion Synthesis and Comprehensive Characterization of Pure and Ni-Doped CuFe₂O₄ Nanoparticles for Functional Composite Applications
Abstract: The CuFe2-xNixO4 (x = 0, 0.1, 0.3, and 0.5) nanoparticles were synthesized using a combustion method and comprehensively characterized to understand their suitability for polymer-based composite applications. X-ray diffraction confirmed the formation of a single-phase spinel ferrite structure with crystallite sizes of 20–30 nm. Energy-dispersive X-ray spectroscopy verified the successful incorporation of Ni ions into the CuFe₂O₄ lattice, while FE-SEM analysis revealed uniformly dispersed nanoscale particles desirable for composite reinforcement. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Next-Generation Lightweight Nanocomposite Structures for Electric Mobility
Abstract: The rapid expansion of the electric vehicle (EV) sector has intensified the demand for battery enclosures that are lightweight, mechanically strong, thermally stable, and environmentally sustainable. This research focuses on the design and sustainable fabrication of hybrid nanocomposites for advanced EV battery housings. The proposed material system integrates carbon fiber, glass fiber, and graphene nanoplatelets within a bio-based epoxy matrix, resulting in improved mechanical strength, enhanced thermal stability, and superior …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1147–1156 Read article
-
Managing Blow-by in Modern Engines: A Comprehensive Review of Crankcase Ventilation Technologies
Abstract: Blow-by in internal combustion (IC) engines occurs when high-pressure combustion gases escape past the piston rings into the crankcase. These gases typically carry oil aerosols, unburned hydrocarbons, and fine particulate matter, which, if not effectively managed, can disrupt lubrication, accelerate component wear, and contribute to harmful emissions. Effective crankcase ventilation is therefore essential not only for ensuring engine durability but also for meeting increasingly stringent emission regulations. This paper examines …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 317–324 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
A Retrospective Analysis of Resin-Based Polymer Composites and Bioactive Glass-Polymer Hybrids Regarding Secondary Caries and Durability
Abstract: Aim- To compare the 2-year clinical survival and failure modes of a Resin-Based Polymer Composites and BioactiveGlass-Polymer Hybrids in Class I and II posterior restorations. Methods-A total of 550 restorations were placed in adult patients across various private dental practices in India to ensure a diverse clinical demographic. Teeth were randomly assigned and restored with either a hybrid composite (Te-Econom, IvoclarVivadent; n=275) or a Resin-Modified Glass Ionomer Cement (GC Gold …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1089–1095 Read article
-
In Vivo Biocompatibility and Interfacial Stability of Thermoplastic Polyurethanes and Nanofilled Resin Composites: A Bioanalytical Study of Polymer-Host Interactions Under Dynamic Loading
Abstract: The widespread application of thermoplastic polyurethanes (TPU) and nanofilled resin composites in biomedical devices requires rigorous assessment of their biocompatibility under mechanical stress. While nanofilled composites utilize filler particles (<100 nm) to enhance surface properties and wear resistance, the biological response to these materials in a hydrolytic, enzymatic environment remains a critical area of investigation. Objective: To analyze the in vivo bio-molecular response at the interface of TPU aligners and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1112–1119 Read article
-
Green Energy and Intelligent Transportation: The Role of Composite Materials in Electric and Automotive Sectors
Abstract: The global transition toward sustainable mobility is accelerating, driven by mounting concerns over climate change, urban congestion, and the rapid development of green energy technologies. At the heart of this transformation lie intelligent transportation systems (ITS) and electric vehicles (EVs), which are collectively reshaping the future of modern transportation. Within this context, composite materials have emerged as key enablers, offering lightweight, durable, and energy-efficient solutions that enhance vehicle performance, range, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1096–1111 Read article
-
Interfacial and Tribo-Mechanical Performance of a TiO₂–Castor Oil Polymeric Nanofluid During Sustainable Machining of AISI 316L Stainless Steel Under MQL Conditions
Abstract: This research examines the tribo-mechanical performance and interfacial film characteristics of a TiO₂-reinforced castor-oil polymeric nanofluid during the turning of AISI 316L stainless steel under minimum-quantity lubrication (MQL). A Taguchi L9 orthogonal array was utilized to assess the synergistic effects of cutting speed, depth of cut, and coolant composition on surface integrity, while machining experiments were performed under dry, conventional, and TiO₂-nanofluid lubrication techniques. ANOVA and multiple-regression modeling were used …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 901–914 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Optimization of Sustainable Electrochemical Machining Parameters for Polymer based Materials Using AHP Integrated TOPSIS Method
Abstract: The current paper describes the use of the AHP-TOPSIS method to optimize process parameters in sustainable electrochemical machining of polymer composites. Combine lightweight polymer matrices with reinforcing particles or fibers such as TiB₂, SiC, or Al₂O₃, offering high strength-to-weight ratio, corrosion resistance, and design flexibility, making them ideal for aerospace and automotive applications. Non-conductive and heterogeneous nature poses challenges during electrochemical machining, as it affects current distribution and material removal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1048–1059 Read article
-
Role of Strontium in Structural and Dielectric characterstics of Barium Titanate
Abstract: Ba₀.₇₅Sr₀.₂₅TiO₃ (BST) compound was synthesized through the conventional solid-state reaction methodology, aimed at investigating its structural, microstructural, and dielectric characteristics. The structural characterization was executed employing X-ray diffraction (XRD), and the resultant diffraction patterns were refined utilizing the Rietveld method, which substantiated the establishment of a single-phase perovskite configuration exhibiting tetragonal symmetry and belonging to the P4mm space group. The refined lattice parameters revealed subtle distortions correlating with the substitution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1157–1163 Read article
-
Design and Analysis of Honeycomb Rear Door Map Pocket by Application of Finite Element Method
Abstract: In modern automobiles, the door trim plays a vital role in both functionality and occupant safety. It integrates various convenience features such as armrests, power window switches, and map pockets, while also contributing to crash energy absorption during side impacts. In such collisions, the occupant's body typically contacts the door trim, making its design and material selection critical for minimizing injury through controlled deformation and energy dissipation. This research focuses …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 940–951 Read article