All articles
326 articles
-
Analytical Study of Concrete-encased Steel Column Building against Blast Load
Abstract: Study of behavior of composite building with Concrete-Encased Steel (CES) columns for blast loading is done. This is compared with the behavior of conventional building having reinforced concrete (RC) columns. In the following study, both composite and RC buildings are subjected to 0.1 ton, 0.3 ton and 0.5 ton TNT equivalent charge weight of blast load with a standoff distance of 20 m, 30 m and 40 m. To study …
Published in Journal of Structural Engineering and Management Read article
-
Improvement of Productivity in Indian Shipbuilding Industry to Global Stature
Abstract: A case is presented to closely look at the Productivity improvement of Indian Shipyards through foreign collaborations. It is proposed that Government of India, adopt two well intentioned strategies relating to carriage of Indian Cargo in Indian Built ships. All Indian Navy vessels shall be constructed in Indian Shipyards only. It is proposed that Government of India sets up a Shipbuilding Technology Centre in the immediate future. Steps have been …
Published in Journal of Offshore Structure and Technology Read article
-
Design, Fabrication and Testing of Safety Valve Vent Silencer with Cyclone Separator for Industrial Applications
Abstract: The aim of this research work is to safeguard the infill materials, which is used inside the safety valve vent silencer. This research will help the infill materials from the wet steam and increases the life of the infill materials. The main parts of the research project are the cyclone chamber, center pipe. This cyclone separator drains the condensate through the lower part of the silencer and the steam releases …
Published in Journal of Industrial Safety Engineering Read article
-
A Comparative Study on Beam Slab and Flat Plate Building Frame under Seismic Load
Abstract: The study delves to evaluate the performance of beam slab and flat plate slab in the building frame due to seismic load. Two models of the same layout plan and story levels were compared under seismic load as per BNBC 2016—one was a typical frame structure with beam slab i.e., model 1 and another one was a frame structure with a flat slab, i.e., model 2. Frame structure with beam …
Published in Journal of Structural Engineering and Management Read article
-
Technology Strategy for Improved Safety Management in Steel Industry
Abstract: In last three-four decades, complete technological revolutions have been underwent in Iron and Steel industries. In a relatively short time, the steel industry has observed the almost elimination of hazard and cost inefficient old technologies to state-of-the-art technologies. Strategy for sustainable development is to increase the production value along with other aspects such as techno-economic effectiveness, effective utilization of resources, projection of occupational health and safety, and environment of employees …
Published in Journal of Industrial Safety Engineering Read article
-
Comparative Study on Unsymmetrical G+15, G+20, G+25 Story Building with Flat Slab, Conventional Slab, And Flat Slab Without Drop
Abstract: There are different types of slabs from which the slab supported by column and beam is called as Conventional slab and the slab which is supported by Column and drop but the beam is not used in this slab is called as flat slab. Live and dead loads are transferred from slab to drop and then it is transfer to columns. This type of slab mostly preferred for long span …
Published in Journal of Structural Engineering and Management Read article
-
A Study on Site Selection Component of Model Logistics Park: A Case of Uttar Pradesh, India
Abstract: Uttar Pradesh, India’s 4th largest state and 3rd largest economy eyeing being a One trillion-dollar economy. Among the top 5 manufacturing states of India, home to the second-highest number of Micro, Small, and Medium Enterprises (organized and unorganized) in India. The National Highways Logistics Management Limited under the Ministry of Road Transport and Highways (MoRTH) and the National Highways Authority of India proposed Multi-Modal Logistics Parks (MMLPs) as an initiative …
Published in Trends in Transport Engineering and Applications Read article
-
High Strength Bolt Tightening and Verification Techniques for Steel Connections: In-Depth Study and National Survey
Abstract: The current means and methods of verifying that high strength bolts have been properly tightened is very laborious and time consuming. In some cases, the techniques require special equipment and in other cases the verification itself may be somewhat subjective. While some commercially available verification techniques do exist, there are drawbacks such as being costly, time-consuming, and impractical to use in the field. The main objectives of this project were …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Lumped Construction Sequence for Column Shortening Analysis in High Rise Building with Outrigger System
Abstract: The exact value of column shortening is not a straightforward task. Various parameters are affected on column shortening results like rate of construction sequence and reinforcement ratio. The building should stand with high stiffness and must be able to resist lateral deformation without having discomfort to the user. The excessive drift is controlled by using outrigger system. In high rise buildings, the construction sequence analysis and conventional sequence analysis are …
Published in Recent Trends in Civil Engineering & Technology Read article
-
DEM Simulation of Macro and Micro-scale Behavior of Granular Materials during Loading and Unloading
Abstract: The present paper aims at comparing the simulated stress-strain behavior of granular materials quantitatively with the experiment and exploring the evolution of the micro-scale behaviors during loading and unloading using the discrete element method (DEM). A numerical sample consisting of 9826 randomly generated spheres similar to the experiment was prepared. The numerically prepared isotropic sample was subjected to loading and unloading under strain controlled condition. It is noticed that the …
Published in Journal of Geotechnical Engineering Read article
-
Dynamic Analysis of Irregular Building with Box Type Shear Wall at Center under Different Type of Soil
Abstract: Building engineers are being shown to accept High rise construction due to increase shortage and land cost. The development of high-rise buildings presents many challenges with the type of lateral load. In High rise buildings getting better efficiency and the high-strength shear wall is an effective solution. The Optimum location of the shear wall depends upon the structural shape of buildings. For irregular structures, inner shear walls provide more strength …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Analysis of Proposed Diagrid Geometry Using Golden Ratio in Non-Linear Regime of Material
Abstract: Lateral loads are critical in the design of high-rise structures. The buildings need to have high stiffness and must be able to resist lateral deformations and torsional rotations without having discomfort to the user. Diagrid structural system is one of the systems used in resisting lateral forces. In this study, diagrid geometry is generated using the ‘Golden Ratio’ concept and used to model 40, 50, and 60 story structures. Two …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Seismic Retrofitting of Floating Column Building with Fluid Viscous Dampers and Structural Bracings by using Fast Non-linear Time History Analysis
Abstract: In some of the building structures, even in the newly constructed one, floating columns are used to achieve an aesthetic view or to satisfy the space requirement criteria of building areas like reception lobbies, parking spaces, conference rooms in malls etc. With the use of proper design considerations, buildings built with floating columns, which otherwise are not advised by the codes, can withstand vertical loads, i.e., gravity loads and live …
Published in Journal of Offshore Structure and Technology Read article
-
Study of Behavior of Buckling Restrained Bearing Frame Along with Soil Structure Interaction
Abstract: Lateral forces due to earthquake are the major consideration for design of earthquake resisting structures, these forces can be resisted by various systems like braced frames, shear walls, moment frames, etc. Energy dissipation is one of the most convenient option for earthquake resistance, as it can absorb input energy from earthquake protecting the main structure. Past research revealed that the Buckling Restrained Braces (BRB) are the best type of energy …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Study on the Response of Strengthening Strategies for Masonry-infilled Open Ground Storey Framed Building
Abstract: The strengthening of reinforced concrete (RC) frame buildings with masonry infill wall and with open ground storey is a very timely and significant topic because of the poor performance against seismic action. The absence of infill walls in the ground storey makes the ground storey less stiff and weaker than the all upper storys which results in a poor performance against lateral loads. Soft storey mechanism prevails in these cases …
Published in Journal of Structural Engineering and Management Read article
-
Comparative Study of Soft Soils Characteristics with Cement Waste Dust, Lime Powder and Boiled Rice Water
Abstract: Improvement of soft soil properties and effective pavement system performance of soft soils can be done only by stabilization process. It is an effective method. Jointly or individually, Chemical and/or Mechanical stabilization is done for various soils depending on the nature of that soil. As far as soft soils are concern, they are having reactive nature and so chemical stabilization is the best choice to improve such soil. Mainly, in …
Published in Recent Trends in Civil Engineering & Technology Read article
-
Effect of Particle Size of Sand on the Interface Shear Behavior of Sand and Non-woven Geotextile
Abstract: Soil-geosynthetic interface is the weakest zone for shear failure. It is influenced by size, shape, density and water content of sand. It is also influenced by the properties of geosynthetic such as texture and structure. This paper explores the influence of the size of sand on the behavior of sand-geotextile interface. Three types of sands namely coarse, medium and fine sand and non-woven geotextile were used in this study. Several …
Published in Journal of Geotechnical Engineering Read article
-
Evaluation of Heat Stress Exposure to Occupational Workers at Workplace
Abstract: Heat stress is considered as an occupational health hazard encountered in indoor as well as outdoor environments. In industries, many operations are carried out which involve either heat generating sources like boiler, furnace, dryers etc. or hot operations like welding, melting, glass blowing and pouring. Moreover, the extremes of temperature in summer also add to the level of exposure to heat stress. Exposure of occupational workers to heat stress can …
Published in Journal of Industrial Safety Engineering Read article
-
Modal Analysis of RC Masonry Infill Model and Prototype Frames with Openings
Abstract: Modal evaluation is the technique of figuring out the inherent dynamic traits of the shape in phrases of herbal frequencies and mode shapes and the usage of them to create a mathematical version for its dynamic behavior. The dynamics of a structure is defined by frequency and position. Modal evaluation offers the records regarding to exceptional modes of vibration, exceptional form that may be taken up via way of means …
Published in Journal of Structural Engineering and Management Read article
-
Comparative Analysis of Conventional Formwork with Specialized Emerging Formwork Regarding Project Engineering Factors for High-rise Building
Abstract: Today, because of globalization, there have been a number of improvements in the construction of modern technology worldwide, as a result of the quick and reliable distribution of new and emerging technologies through societies worldwide and the cross-border information sharing. Shaping which helps to mount the concrete in the desired shape It is a critical component of the construction to support the loads placed on it, as well as supporting …
Published in Recent Trends in Civil Engineering & Technology Read article