All articles
326 articles
-
Role of Clay Liners in Municipal Solid Waste Landfills: A Review
Abstract: Rapid population growth has significantly increased the generation of municipal solid waste (MSW) in urban and suburban regions. Disposal of MSW in landfills without proper liner systems may lead to leachate migration and subsequent contamination of groundwater and surrounding soils. The use of liner systems at the base of landfills is therefore essential to minimize leachate percolation and protect the environment. Geosynthetic clay liners (GCLs) and compacted clay liners (CCLs) …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 2, 2026 · pp. 50–56 Read article
-
Sources and Health Effects of Arsenic, Fluoride, and Nitrate in Water
Abstract: Arsenic, fluoride, and nitrate are major inorganic contaminants in water that pose significant risks to human health. These contaminants are introduced into water sources through both natural geological processes and human activities. Arsenic is primarily released from arsenic-bearing minerals through weathering, dissolution, and erosion, while human activities such as agriculture, mining, and fossil fuel combustion further enhance its presence in water. Fluoride contamination mainly results from the dissolution of fluoride-bearing …
Published in Journal of Water Resource Engineering and Management · Vol. 13, Issue 2, 2026 · pp. 19–25 Read article
-
Seismic Response Characterization of Vertically Irregular Multi-Storey Buildings Incorporating Mass and Stiffness Variations Using E-TABS Software
Abstract: The increasing demand for innovative architectural designs has led to the widespread use of vertically irregular configurations in high-rise reinforced concrete (RC) buildings. However, such irregularities significantly influence structural performance under seismic loading conditions, leading to complex structural behaviour and stress concentration at specific levels This study focuses on evaluating the seismic behaviour of vertically irregular multi-storey buildings using nonlinear time history analysis, which provides a realistic representation of structural …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 3, 2026 Read article
-
Performance-Based Wind Response Analysis of Tall RCC Iregular Structures Using Autodesk Revit and Robot Structural Analysis
Abstract: The increasing trend of vertical construction has made wind effects a critical consideration in the design of tall reinforced concrete (RCC) buildings. The response of such structures is largely governed by their geometric configuration, stiffness characteristics, and modelling accuracy under wind loading conditions Wind loads are evaluated based on standard provisions such as IS 875 (Part 3): 2015, which provide essential guidelines for structural safety This study focuses on evaluating …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 3, 2026 Read article
-
Application of Artificial Neural Networks in Optimizing Polyhouse Roof Truss Design
Abstract: Polyhouses are specialised agricultural structures developed to maintain controlled environmental conditions for crop cultivation, thereby ensuring consistent productivity even under adverse climatic circumstances. The performance of these systems largely relies on the structural stability and cost efficiency of the roof truss, which must achieve an effective balance between strength, adaptability, and economy. In this research, an Artificial Neural Network (ANN)-based modelling framework is introduced to optimise the members of polyhouse …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 15–25 Read article
-
Review on Comparative Analysis of Lateral Load Response of UG+G+7 Building Using Shear Wall, Bracing and Moment Resisting Frame Systems
Abstract: This review paper provides a relative analysis of lateral load-resisting systems in multi-storey buildings, specifically focusing on high-rise structural configuration. The study synthesizes findings from research Papers to evaluate the performance of shear wall systems, bracing systems, and moment-resisting frame systems under seismic and wind loading conditions. With the rising requirement for safe and efficient urban structures, understanding the behavior of different structural systems under lateral loads has become essential.The …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Performance Based Seismic Evaluation of G+12 RCC Structures in Seismic Zone IV with and without Corner Shear Walls Considering Soil Types I, II, and III
Abstract: Seismic behavior of multi-storey buildings is significantly influenced by structural stiffness and supporting soil conditions. This study investigates the seismic response of a G+12 reinforced concrete building by comparing two structural configurations, namely buildings with shear walls and buildings without shear walls, under three soil conditions: Type I, Type II, and Type III soils. The analysis is carried out using the response spectrum method in accordance with IS 1893 (Part …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Digital Innovation in Heritage Management: Exploring possibilities of I-BIM and H-BIM through Borobudur Temple and Dhanyakuriya
Abstract: Heritage buildings are vital links to our past, embodying the architectural, cultural, and historical significance of earlier eras. Their preservation has become increasingly complex due to environmental degradation, structural aging, and the evolving urban landscape. This paper investigates the application of Heritage Building Information Modelling (H-BIM) as a comprehensive methodology for documenting and conserving these structures. H-BIM leverages advanced digital technologies such as photogrammetry, laser scanning, and Geographic Information System …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 2, 2026 Read article
-
Enhanced Sustainable Concrete Mix Design Using LLMs and Advanced Machine Learning Techniques
Abstract: Large Language Models (LLMs) are emerging as transformative tools in materials science, offering human-like reasoning, zero-shot problem solving, and the ability to integrate fuzzy laboratory knowledge with structured data. This study extends and reinterprets the original systematic benchmark for using LLMs in sustainable concrete design, particularly for Alkali-Activated Concrete (AAC). We introduce an enhanced, multi-model framework combining LLM-based inverse design, Random Forest regression, Gaussian Process Regression (GPR), and a lightweight …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
IS-Aligned Strategic Evaluation of Fire Protection Systems for Improving Fire Safety in Mixed-Occupancy High-Rise Buildings
Abstract: This paper presents a substantially reworked Indian-context evaluation of fire protection systems in a 14-building high-rise sample from Indore. The study reuses the original field dataset but replaces the earlier code mix with an explicitly IS-aligned and NBC-oriented analytical framework. Physical observation, document review and interview inputs were screened against requirements related to means of egress, compartmentation, fire detection and alarm, hydrants and hose reels, extinguishers, emergency lighting, smoke control, …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Comparative Performance Assessment of Shear Wall and Diagrid Systems in an Octagonal Tall High-Rise Building under Seismic and Wind Loads
Abstract: The increasing demand for high-rise structures due to rapid urbanization necessitates the adoption of efficient lateral load-resisting systems to ensure structural safety, stability, and serviceability. This study presents a comparative evaluation of the seismic and wind performance of a Ground plus Fiftystorey high-rise building with an octagonal plan, incorporating different structural configurations such as shear wall arrangements and a diagrid system. A total of six analytical models, including a conventional …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Review On BIM-Based (Revit+Robot Software) Comparative Wind Load Analysis of High-Rise RCC Buildings in Zone-III, IV and V
Abstract: Wind load is one of the most critical factors influencing the design and serviceability of high-rise reinforced concrete (RCC) buildings. As building height increases, wind-induced effects such as storey drift, lateral displacement, and structural stiffness become dominant design considerations. Numerous studies have been conducted using conventional and advanced techniques such as Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and Building Information Modelling (BIM). However, limited research focuses on comparative …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
From Baseline Survey to Management Plan: A Systematic Framework for Port-Specific Mitigation of Underwater Radiated Noise
Abstract: The growing recognition of underwater radiated noise (URN) as a significant marine pollutant necessitates the development of actionable management frameworks at the port level, where noise sources are concentrated, and impacts can be particularly acute. While international guidelines exist, a standardized methodology for ports to transition from assessment to implementation is lacking, particularly in regions with high biodiversity and developing maritime infrastructure. This paper presents and demonstrates a systematic, four-phase …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 22–30 Read article
-
An Exploratory Study on the Application of Locust Bean Pod Extract as a Natural Binder in the Manufacture of Laterite Blocks for Affordable Housing Construction
Abstract: This study investigates the potential application of locust bean pod extract as an alternative binding material in the production of laterite blocks for local building construction. It also examines the availability and distribution of locust bean pod resources across Nigeria and other parts of Africa. Locust bean pods are typically treated as agricultural waste and discarded after the seeds are removed, creating an opportunity to convert this underutilized by-product into …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 36–45 Read article
-
Intersection Safety in Urban Environments: A Review of Risk Factors and Crash Patterns
Abstract: Urban intersections are critical points of interaction between multiple road users, including cars, buses, two-wheelers, cyclists, and pedestrians. As cities continue to expand rapidly, the density and complexity of traffic at intersections increase, making them among the most dangerous segments of the roadway network. Numerous studies show that intersections account for nearly half of all urban road crashes, making them central to safety research and planning. This review paper synthesizes …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 31–35 Read article
-
Comparative Seismic Response of Irregular High-Rise RCC 25 Storey Buildings with and without Shear Walls Considering P–Delta Effect
Abstract: The seismic performance of high-rise reinforced concrete (RCC) buildings is significantly affected by plan irregularity, lateral stiffness distribution, and second-order (P–Delta) effects. Irregular structural configurations may generate torsional response and increased deformation demand under seismic excitation while geometric nonlinearity further amplifies displacement and internal forces in tall structures . This study presents a comparative seismic assessment of a G+24 storey RCC building having overall plan dimensions of 30,000 mm × …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 2, 2026 Read article
-
Enhancing Construction Safety Performance Through Artificial Intelligence: A Systematic Review
Abstract: The construction industry is still one of the most dangerous sectors globally because of its dynamic working environment, the employment of heavy machinery, and the complexity of operational processes. Traditional safety management methods are largely dependent on manual monitoring and reactive measures, which are not always effective for accident prevention. In recent years, Artificial Intelligence (AI) has been recognized as a revolutionary technology in construction safety, with capabilities such as …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 13–30 Read article
-
Development of a Model on Pavement Condition Index
Abstract: India has one of the most extensive road networks globally, comprising various categories such as National Highways, State Highways, District Roads, and Village Roads. Each category of road plays an impressive role in economic development and connectivity among different important roads. But, the condition of these roads varies effectively due to difference in traffic intensity, construction quality, maintenance practices and climatic condition. The present research work conducted pavement condition surveys …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 1–7 Read article
-
Fire Safety in Healthcare Facilities: An Indian Perspective
Abstract: Fire protection and safety measures in hospitals are of utmost importance to ensure the safety of patients, staff, and visitors. Due to the patients' limited mobility, hospitals are more susceptible to fire disasters. Short-circuits, basements being used as storehouse, inappropriate storage of flammable liquids, improper power supply load, false ceiling panel lined with thermocol, faulty electric wirings, and overheating leading to burning of wires are some of the common causes …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 1, 2026 · pp. 8–12 Read article
-
Hydrodynamic Assessment of a Proposed FSRU Development in the Visakhapatnam Outer Harbour
Abstract: This study presents a detailed hydrodynamic assessment of a proposed Floating Storage andRegasification Unit (FSRU) in the Visakhapatnam Outer Harbour. A depth-integrated, two- dimensional hydrodynamic model was developed using MIKE-21 Flexible Mesh (FM) to quantify theinfluence of the terminal layout, dredged pocket configuration, and vessel presence on tidal circulation, freshet-driven flows, and extreme-event conditions. Baseline simulations were performed using existing bathymetry and operational geometries, followed by proposed configurations that included …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 39–49 Read article