All articles
1751 articles
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Some Plant Extracts Potential in Cleaning Soil Environment Contaminated with Petroleum Hydrocarbon
Abstract: This research considered the trend of some agro-based plant extracts obtained from paw paw, mango and aloe-vera leaves for the purpose of treatment of a contaminated soil environment. The potential of each agro-based plant extract was tested with respect to its ability in the area of petroleum hydrocarbon clean-up in soil environment. The impact of the variation on the pH on each of the bioreactor set-up was monitored and the …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 27–39 Read article
-
Study on Single-Slope Solar Still for Experimental and Data-Driven Analysis for Improving Productivity with Different Basin Materials.
Abstract: This study investigates the single-slope solar still under the diurnal variation of water temperature and distillate yield under identical operating conditions. Experimental analysis was conducted to evaluate the performance enhancement through the incorporation of natural basin materials, namely hemp and sand. The water distillation process is focused on improving potable water productivity and thermal behaviour. The inclusion of hemp and sand in the basin leads to noticeable differences in productivity …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 31–46 Read article
-
Thermo-Mechanical Vibration Analysis of Simply Supported Laminated and Flat Plates Under Harmonic Loading
Abstract: This paper delves into a numerical exploration of the vibration characteristics and frequency response of two types of plates: a simply supported rectangular laminated plate and a simply supported flat plate. These plates are subjected to concentrated harmonic forces within a thermal environment. The determination of the critical buckling temperature guides the assessment of thermal load effects. Analytical formulations, incorporating first-order shear deformation theory (FSDT) to consider shear deformation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1519–1530 Read article
-
Production of Injection Moulded Natural Fiber Reinforced Hybrid Composites and Assessment of Hybridization’s Effect on Mechanical Properties
Abstract: Over the past two decades, rising environmental awareness, public concern over waste, and stricter government regulations have encouraged companies to reduce their reliance on petroleum-based fuels and products. Consequently, there is a clear need to find sustainable, eco-friendly substitutes for the materials currently in use. This shift has renewed attention on renewable resources and sparked wider interest in advanced composites and green materials research. With this in mind, the present …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 246–271 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Thermo–Electrical Performance Enhancement of a Lightweight Polymer–Metal Hybrid Electrostatic Precipitator Using Epoxy-Based Composite Housing for Industrial Particulate Control
Abstract: Airborne particulate emissions, particularly PM₁₀ and PM₂.₅ produced by industrial activities and combustion processes, they continue to pose a significant threat to both the environment and public health. Electrostatic precipitators (ESPs) are widely recognized for their ability to achieve high collection efficiencies; however, conventional metallic constructions often lead to increased system weight, higher fabrication costs, and long-term corrosion-related challenges. In this study, a lightweight hybrid material approach is proposed by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 652–668 Read article
-
Characterization and Performance of a Multiphase Lignocellulosic-Polymeric Composite Growth Media in an IoT-Automated NFT Hydroponic System
Abstract: Hydroponics utilizing the Nutrient Film Technique (NFT) entails a type of soilless agriculture involving the delivery of a continuously flowing and thin film of nutrient-filled solution onto the roots of plants. With the move toward sustainable and efficient urban agriculture in the contemporary world and need to produce more effective and resource-efficient solutions, there have been significant efforts aimed at improving these techniques through advanced materials and automation. A consistent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 542–555 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Non-Contact Quantification of Swelling-Induced Deformation in Polymer Hydrogels Using Image Analysis
Abstract: Swelling of polymer hydrogels governs transport, mechanics, and functional performance in biomedical systems, yet it is often reported using bulk ratios that conceal spatially heterogeneous deformation and boundary-driven instabilities. This study presents a non-contact image-analysis framework to quantify swelling-induced deformation by tracking shape and boundary evolution from time-lapse imaging. The approach segments the hydrogel region, extracts a sub-pixel refined contour, and computes boundary displacement descriptors including mean and upper-percentile normal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1499–1509 Read article
-
Quantitative Image-Based Assessment of Degradation Patterns in Polymer-Based Medical Implants
Abstract: Polymer-based medical devices are widely used in clinical practice, where long-term material degradation can compromise performance and patient safety. Traditional polymer degradation studies predominantly rely on laboratory-based experiments, which often fail to capture real-world operational and usage conditions. In this study, a multimodal, data-driven framework is proposed for the quantitative assessment of degradation patterns in polymer-based medical devices using publicly available clinical failure data. Structured operational parameters, including cumulative usage …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1510–1518 Read article
-
Experimental Investigation and Optimization of Machining Parameters for Al6351 Alloy Using a Modified Taguchi Approach
Abstract: Machining processes encompass both conventional and non-conventional techniques and optimizing machining parameters is crucial for achieving high-quality outcomes. However, simplifying these processes remains a significant challenge. This study focuses on determining the optimal machining parameters—cutting speed, feed rate, and depth-of-cut to enhance performance characteristics in Al6351 alloy plates. The parameters evaluated include surface roughness (Ra), material removal rate (MRR), resultant forces (RF), and temperature at the tool- workpiece interface (Temp). …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1463–1481 Read article
-
Advances in Photocatalytic Catalysts for Wastewater Treatment
Abstract: Water is a fundamental component of the life support system and is indispensable for the survival of all living organisms. Life cannot exist without water, and human societies depend on it for drinking, agriculture, industry, and sanitation. Water resources are increasingly under pressure in terms of both quality and availability, largely due to rapid industrial development, expanding urban areas, and rising population levels. These human-driven activities have played a major …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 · pp. 44–56 Read article
-
Solid Acid Catalysts for the Selective Conversion of Biomass to Levulinic Acid
Abstract: Levulinic acid (LA) has emerged as a versatile platform chemical with significant potential for producing renewable fuels like gamma-valerolactone (GVL), biodegradable polymers, and fine chemicals from biomass (both terrestrial and marine which ae rich in carbohydrate). The selective conversion of biomass-derived carbohydrates to LA requires efficient catalytic systems that can overcome the recalcitrance of the biomass, namely the stiff-necked structural integrity of cellulose and the kind of strong interactions between …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Fibre Orientation and Void Distribution Analysis in Polymer Composite Structures Using Image Processing
Abstract: Fibre orientation and void distribution are critical microstructural features that govern the mechanical performance and reliability of polymer composite materials. Accurate and simultaneous characterisation of these features remains challenging due to their complex spatial interactions and dependence on processing conditions. In this work, an integrated image-processing framework is proposed for the quantitative analysis of fiber orientation and void distribution in polymer composite structures. High-resolution composite microstructure images are processed through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 925–933 Read article
-
Image-Based Crack Morphology Characterisation for Electrical Failure Analysis in Conductive Polymer Composites
Abstract: Electrical performance in conductive polymer composites is strongly governed by crack-network evolution, yet failure analysis typically relies on qualitative image inspection or electrical anomaly detection in isolation. This work proposes an end-to-end framework that converts optical/SEM crack imagery into a standardised crack morphology signature and quantitatively links it to electrical degradation indicators. A two-stage learning strategy is adopted: crack-representation pretraining using the public Concrete Crack Images for Classification dataset, followed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1375-1386 Read article
-
Polymer Composite-Enhanced Anaerobic Digestion of Kitchen Waste for Optimised Biogas Production: Process Design, Parametric Study, and Simulation Analysis
Abstract: There is an urgent need for decentralised sustainable biogas production from organic waste due to the rising amount of food waste in cities. The application of polymer composite material including HDPE tanks, PVC pipes, and FRP secondary containment systems presents a promising option compared to conventional MS digester fabrication in terms of durability, excellent thermal insulation capability, light weight, and easier installation. This study explores the possibility of adopting a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 803–818 Read article