STM Journals Peer-reviewed research from Consortium e-Learning Network

Journal of Polymer & Composites Review Article Special issue

Use of Composite Materials for Sustainability

  1. Parveen Kumar Department of Civil Engineering, Maharishi Markandeshwar Engineering College, Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala
  2. Chadetrik Rout Department of Civil Engineering, Maharishi Markandeshwar Engineering College, Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala

Abstract

Composite materials have emerged as key components in the quest for sustainability, providing a means to decrease environmental impact while improving performance in several applications. Some of the major benefits of using composites are durability, cut down regular repairs and replacements, preserve natural resources, reduce waste generation, and carbon footprint related to manufacturing processes. Due to renewability of natural fibers, the use of composites boosts sustainability and minimizes the environmental impact as compared to synthetic fibers. This study explores the production, qualities, and uses of sustainable composite materials, with a focus on bio-based, recycled, and natural fiber-reinforced composites. Key production procedures and problems are discussed, as well as the environmental ramifications of employing these materials. It focuses on the mechanical characteristics, life cycle assessment, and end-of-life disposal issues of sustainable composites. Applications in construction, automotive, aerospace, renewable energy, etc. are investigated, demonstrating the adaptability and potential use of these materials. The future prospects of research and development are reviewed and discussed, with an emphasis on increasing recycling technologies and material performance. The study emphasizes the significance of sustainable composite materials in meeting environmental goals and promoting innovation in material science. It also stated research attempts to give a solid grip on the existing situation and future possibilities for sustainable composites.

Keywords

References (72)

  1. Goodland R, Daly H. Environmental Sustainability: Universal and Non‐Negotiable. Ecological Applications. 1996;6(4):1002-1017. doi:10.2307/2269583
  2. Xue M. Natural resource performance for a green economic growth: From short-term to long-term quality. Resources Policy. 2024;91:104654. doi:10.1016/j.resourpol.2024.104654
  3. Santos E. From Neglect to Progress: Assessing Social Sustainability and Decent Work in the Tourism Sector. Sustainability. 2023;15(13):10329. doi:10.3390/su151310329
  4. Maiti S, Islam MR, Uddin MA, Afroj S, Eichhorn SJ, Karim N. Sustainable Fiber‐Reinforced Composites: A Review. Advanced Sustainable Systems. 2022;6(11). doi:10.1002/adsu.202200258
  5. Campbell FC, editor. Lightweight materials: understanding the basics. ASM international; 2012.
  6. Mohanty AK, Misra M, Drzal LT. Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World. Journal of Polymers and the Environment. 2002;10(1-2):19-26. doi:10.1023/a:1021013921916
  7. Majewski P, Florin N, Jit J, Stewart RA. End-of-life policy considerations for wind turbine blades. Renewable and Sustainable Energy Reviews. 2022;164:112538. doi:10.1016/j.rser.2022.112538
  8. Andrew JJ, Dhakal HN. Sustainable biobased composites for advanced applications: recent trends and future opportunities – A critical review. Composites Part C: Open Access. 2022;7:100220. doi:10.1016/j.jcomc.2021.100220
  9. AL-Oqla FM, Hayajneh MT, Nawafleh N. Advanced synthetic and biobased composite materials in sustainable applications: a comprehensive review. Emergent Materials. 2023;6(3):809-826. doi:10.1007/s42247-023-00478-z
  10. Dornburg V, Lewandowski I, Patel M. Comparing the Land Requirements, Energy Savings, and Greenhouse Gas Emissions Reduction of Biobased Polymers and Bioenergy. Journal of Industrial Ecology. 2003;7(3-4):93-116. doi:10.1162/108819803323059424
  11. Ramesh M, Palanikumar K, Reddy KH. Plant fibre based bio-composites: Sustainable and renewable green materials. Renewable and Sustainable Energy Reviews. 2017;79:558-584. doi:10.1016/j.rser.2017.05.094
  12. Krauklis AE, Karl CW, Gagani AI, Jørgensen JK. Composite Material Recycling Technology—State-of-the-Art and Sustainable Development for the 2020s. Journal of Composites Science. 2021;5(1):28. doi:10.3390/jcs5010028
  13. Hagnell MK, Åkermo M. The economic and mechanical potential of closed loop material usage and recycling of fibre-reinforced composite materials. Journal of Cleaner Production. 2019;223:957-968. doi:10.1016/j.jclepro.2019.03.156
  14. Ramachandran A, Mavinkere Rangappa S, Kushvaha V, Khan A, Seingchin S, Dhakal HN. Modification of Fibers and Matrices in Natural Fiber Reinforced Polymer Composites: A Comprehensive Review. Macromolecular Rapid Communications. 2022;43(17). doi:10.1002/marc.202100862
  15. Skosana SJ, Khoathane C, Malwela T. Driving towards sustainability: A review of natural fiber reinforced polymer composites for eco-friendly automotive light-weighting. Journal of Thermoplastic Composite Materials. 2024;38(2):754-780. doi:10.1177/08927057241254324
  16. Elkington M, Bloom D, Ward C, Chatzimichali A, Potter K. Hand layup: understanding the manual process. Advanced Manufacturing: Polymer & Composites Science. 2015;1(3):138-151. doi:10.1080/20550340.2015.1114801
  17. Raspall F, Velu R, Vaheed NM. Fabrication of complex 3D composites by fusing automated fiber placement (AFP) and additive manufacturing (AM) technologies. Advanced Manufacturing: Polymer & Composites Science. 2019;5(1):6-16. doi:10.1080/20550340.2018.1557397
  18. Rajak DK, Pagar DD, Kumar R, Pruncu CI. Recent progress of reinforcement materials: a comprehensive overview of composite materials. Journal of Materials Research and Technology. 2019;8(6):6354-6374. doi:10.1016/j.jmrt.2019.09.068
  19. van Oosterom S, Allen T, Battley M, Bickerton S. An objective comparison of common vacuum assisted resin infusion processes. Composites Part A: Applied Science and Manufacturing. 2019;125:105528. doi:10.1016/j.compositesa.2019.105528
  20. Tatara RA. Compression Molding. Applied Plastics Engineering Handbook. 2024:389-424. doi:10.1016/b978-0-323-88667-3.00011-4
  21. Peters ST, Tarnopol'skii YM. Filament winding. InComposites Engineering Handbook 1997 Mar 19 (pp. 527-560). CRC Press.
  22. Leão A, Sartor SM, Caraschi JC. Natural Fibers Based Composites – Technical and Social Issues. Molecular Crystals and Liquid Crystals. 2006;448(1):161/[763]-177/[779]. doi:10.1080/15421400500388088
  23. Mohanty AK, Vivekanandhan S, Pin JM, et al. Composites from renewable and sustainable resources: Challenges and innovations. Science. 2018;362(6414):536-42. https://doi.org/ 10.1126/science.aat907
  24. Ford S, Despeisse M. Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. Journal of Cleaner Production. 2016;137:1573-1587. doi:10.1016/j.jclepro.2016.04.150
  25. Berkhout F, Hertin J, Gann DM. Learning to Adapt: Organisational Adaptation to Climate Change Impacts. Climatic Change. 2006;78(1):135-156. doi:10.1007/s10584-006-9089-3
  26. Bachmann J, Hidalgo C, Bricout S. Environmental analysis of innovative sustainable composites with potential use in aviation sector—A life cycle assessment review. Science China Technological Sciences. 2017;60(9):1301-1317. doi:10.1007/s11431-016-9094-y
  27. Miller SA, Srubar WV, Billington SL, Lepech MD. Integrating durability-based service-life predictions with environmental impact assessments of natural fiber–reinforced composite materials. Resources, Conservation and Recycling. 2015;99:72-83. doi:10.1016/j.resconrec.2015.04.004
  28. Wu N, Demchuk Z, Voronov A, Pourhashem G. Sustainable manufacturing of polymeric materials: A techno-economic analysis of soybean oil-based acrylic monomers production. Journal of Cleaner Production. 2021;286:124939. doi:10.1016/j.jclepro.2020.124939
  29. Chen W, Oldfield TL, Cinelli P, Righetti MC, Holden NM. Hybrid life cycle assessment of potato pulp valorisation in biocomposite production. Journal of Cleaner Production. 2020;269:122366. doi:10.1016/j.jclepro.2020.122366
  30. Vidal R, Martínez P, Garraín D. Life cycle assessment of composite materials made of recycled thermoplastics combined with rice husks and cotton linters. The International Journal of Life Cycle Assessment. 2008;14(1):73-82. doi:10.1007/s11367-008-0043-7
  31. de Sadeleer I, Woodhouse A. Environmental impact of biodegradable and non-biodegradable agricultural mulch film: A case study for Nordic conditions. The International Journal of Life Cycle Assessment. 2023;29(2):275-290. doi:10.1007/s11367-023-02253-y
  32. Periyasamy AP, Militky J. LCA (Life Cycle Assessment) on Recycled Polyester. Textile Science and Clothing Technology. 2019:1-30. doi:10.1007/978-981-13-9578-9_1
  33. Raja P, Murugan V, Ravichandran S, Behera L, Mensah RA, Mani S, et al. A Review of Sustainable Bio‐Based Insulation Materials for Energy‐Efficient Buildings. Macromolecular Materials and Engineering. 2023;308(10). doi:10.1002/mame.202300086
  34. Seile A, Spurina E, Sinka M. Reducing Global Warming Potential Impact of Bio-Based Composites Based of LCA. Fibers. 2022;10(9):79. doi:10.3390/fib10090079
  35. Mahalle L, Alemdar A, Mihai M, et al. A cradle-to-gate life cycle assessment of wood fibre-reinforced polylactic acid (PLA) and polylactic acid/thermoplastic starch (PLA/TPS) biocomposites. Int. J. Life Cycle Assess. 2014;19:1305-15.
  36. Sbahieh S, Rabie M, Ebead U, Al-Ghamdi SG. The Mechanical and Environmental Performance of Fiber-Reinforced Polymers in Concrete Structures: Opportunities, Challenges and Future Directions. Buildings. 2022;12(9):1417. doi:10.3390/buildings12091417
  37. Ramakrishnan S, Wang X, Sanjayan J, Wilson J. Thermal performance assessment of phase change material integrated cementitious composites in buildings: Experimental and numerical approach. Applied Energy. 2017;207:654-664. doi:10.1016/j.apenergy.2017.05.144
  38. Abu Dabous S, Ibrahim T, Shareef S, Mushtaha E, Alsyouf I. Sustainable façade cladding selection for buildings in hot climates based on thermal performance and energy consumption. Results in Engineering. 2022;16:100643. doi:10.1016/j.rineng.2022.100643
  39. Abu-Jdayil B, Mourad AH, Hittini W, Hassan M, Hameedi S. Traditional, state-of-the-art and renewable thermal building insulation materials: An overview. Construction and Building Materials. 2019;214:709-735. doi:10.1016/j.conbuildmat.2019.04.102
  40. Schwarzkopf MJ, Burnard MD. Wood-Plastic Composites—Performance and Environmental Impacts. Environmental Footprints and Eco-design of Products and Processes. 2016:19-43. doi:10.1007/978-981-10-0655-5_2
  41. Zhang W, Xu J. Advanced lightweight materials for Automobiles: A review. Materials & Design. 2022;221:110994. doi:10.1016/j.matdes.2022.110994
  42. Mohanty AK, Vivekanandhan S, Tripathi N, Roy P, Snowdon MR, Drzal LT, et al. Sustainable composites for lightweight and flame retardant parts for electric vehicles to boost climate benefits: A perspective. Composites Part C: Open Access. 2023;12:100380. doi:10.1016/j.jcomc.2023.100380
  43. Agarwal J, Sahoo S, Mohanty S, Nayak SK. Progress of novel techniques for lightweight automobile applications through innovative eco-friendly composite materials: A review. Journal of Thermoplastic Composite Materials. 2019;33(7):978-1013. doi:10.1177/0892705718815530
  44. Rajak DK, Pagar DD, Behera A, Menezes PL. Role of Composite Materials in Automotive Sector: Potential Applications. Energy, Environment, and Sustainability. 2021:193-217. doi:10.1007/978-981-16-8337-4_10
  45. Cășeriu B, Blaga P. Automotive Comfort: State of the Art and Challenges. Lecture Notes in Networks and Systems. 2022:375-387. doi:10.1007/978-3-031-22375-4_30
  46. Nguyen SN, Millereux A, Pouyat A, Greenhalgh ES, Shaffer MSP, Kucernak ARJ, et al. Conceptual Multifunctional Design, Feasibility and Requirements for Structural Power in Aircraft Cabins. Journal of Aircraft. 2021;58(3):677-687. doi:10.2514/1.c036205
  47. Ranasinghe K, Guan K, Gardi A, Sabatini R. Review of advanced low-emission technologies for sustainable aviation. Energy. 2019;188:115945. doi:10.1016/j.energy.2019.115945
  48. Uddin F. Flame-retardant fibrous materials in an aircraft. Journal of Industrial Textiles. 2014;45(5):1128-1169. doi:10.1177/1528083714540700
  49. Karthikeyan N, Anand RB, Suthakar T, Barhate S. Materials, Innovations and Future Research Opportunities on Wind Turbine Blades—Insight Review. Environmental Progress & Sustainable Energy. 2018;38(3). doi:10.1002/ep.13046
  50. Tong C. Materials-Based Solutions to Solar Energy System. Introduction to Materials for Advanced Energy Systems. 2018:231-319. doi:10.1007/978-3-319-98002-7_4
  51. Quaranta E, Davies P. Emerging and Innovative Materials for Hydropower Engineering Applications: Turbines, Bearings, Sealing, Dams and Waterways, and Ocean Power. Engineering. 2022;8:148-158. doi:10.1016/j.eng.2021.06.025
  52. Okolie JA, Nanda S, Dalai AK, Kozinski JA. Chemistry and Specialty Industrial Applications of Lignocellulosic Biomass. Waste and Biomass Valorization. 2020;12(5):2145-2169. doi:10.1007/s12649-020-01123-0
  53. Tong C. Advanced Materials Enable Renewable Geothermal Energy Capture and Generation. Introduction to Materials for Advanced Energy Systems. 2018:321-377. doi:10.1007/978-3-319-98002-7_5
  54. Renzi E, Michele S, Zheng S, Jin S, Greaves D. Niche Applications and Flexible Devices for Wave Energy Conversion: A Review. Energies. 2021;14(20):6537. doi:10.3390/en14206537
  55. Fang H, Bai Y, Liu W, Qi Y, Wang J. Connections and structural applications of fibre reinforced polymer composites for civil infrastructure in aggressive environments. Composites Part B: Engineering. 2019;164:129-143. doi:10.1016/j.compositesb.2018.11.047
  56. Marques A, Mocanu A, Tomić N, Balos S, Stammen E, Lundevall A, et al. Review on Adhesives and Surface Treatments for Structural Applications: Recent Developments on Sustainability and Implementation for Metal and Composite Substrates. Materials. 2020;13(24):5590. doi:10.3390/ma13245590
  57. Yang Y, Boom R, Irion B, et al. Recycling of composite materials. Chem. Eng. Process.: Process Intensif. 2012;51:53-68. https://doi.org/10.1016/j.compositesa.2013.02.009
  58. Witik RA, Teuscher R, Michaud V, Ludwig C, Månson JAE. Carbon fibre reinforced composite waste: An environmental assessment of recycling, energy recovery and landfilling. Composites Part A: Applied Science and Manufacturing. 2013;49:89-99. doi:10.1016/j.compositesa.2013.02.009
  59. Das O, Babu K, Shanmugam V, Sykam K, Tebyetekerwa M, Neisiany RE, et al. Natural and industrial wastes for sustainable and renewable polymer composites. Renewable and Sustainable Energy Reviews. 2022;158:112054. doi:10.1016/j.rser.2021.112054
  60. Dewick P, Miozzo M. Sustainable technologies and the innovation–regulation paradox. Futures. 2002;34(9-10):823-840. doi:10.1016/s0016-3287(02)00029-0
  61. Meng F, Olivetti EA, Zhao Y, Chang JC, Pickering SJ, McKechnie J. Comparing Life Cycle Energy and Global Warming Potential of Carbon Fiber Composite Recycling Technologies and Waste Management Options. ACS Sustainable Chemistry & Engineering. 2018;6(8):9854-9865. doi:10.1021/acssuschemeng.8b01026
  62. Sahu P, Gupta M. A review on the properties of natural fibres and its bio-composites: Effect of alkali treatment. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2019;234(1):198-217. doi:10.1177/1464420719875163
  63. Balasubramanian M. Composite materials and processing. Boca Raton: CRC press; 2014.
  64. Lotfi A, Li H, Dao DV, Prusty G. Natural fiber–reinforced composites: A review on material, manufacturing, and machinability. Journal of Thermoplastic Composite Materials. 2019;34(2):238-284. doi:10.1177/0892705719844546
  65. Wan L, Ismail Y, Sheng Y, Ye J, Yang D. A review on micromechanical modelling of progressive failure in unidirectional fibre-reinforced composites. Composites Part C: Open Access. 2023;10:100348. doi:10.1016/j.jcomc.2023.100348
  66. Branfoot C, Folkvord H, Keith M, Leeke GA. Recovery of chemical recyclates from fibre-reinforced composites: A review of progress. Polymer Degradation and Stability. 2023;215:110447. doi:10.1016/j.polymdegradstab.2023.110447
  67. Vogiantzi C, Tserpes K. A Preliminary Investigation on a Water- and Acetone-Based Solvolysis Recycling Process for CFRPs. Materials. 2024;17(5):1102. doi:10.3390/ma17051102
  68. Qazi H, Lin R, Jayaraman K. Fibre structure preservation in composite recycling using thermolysis process. Resources, Conservation and Recycling. 2021;169:105482. doi:10.1016/j.resconrec.2021.105482
  69. Xu M, Yang J, Ji H, Wu Y, Li J, Di J, et al. Recovering high-quality glass fibers from end-of-life wind turbine blades through swelling-assisted low-temperature pyrolysis. Waste Management. 2024;187:179-187. doi:10.1016/j.wasman.2024.07.020
  70. Wiśniewska P, Haponiuk JT, Colom X, Saeb MR. Green Approaches in Rubber Recycling Technologies: Present Status and Future Perspective. ACS Sustainable Chemistry & Engineering. 2023;11(24):8706-8726. doi:10.1021/acssuschemeng.3c01314
  71. Wei Y, Hadigheh SA. Development of an innovative hybrid thermo-chemical recycling method for CFRP waste recovery. Composites Part B: Engineering. 2023;260:110786. doi:10.1016/j.compositesb.2023.110786
  72. Araujo-Andrade C, Bugnicourt E, Philippet L, et al. Review on the photonic techniques suitable for automatic monitoring of the composition of multi-materials wastes in view of their posterior recycling. Waste Manag. Res. 2021;39(5):631-51.
Support