Water Absorption
15 articles · search the full text for this term
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Experimental Investigation of Water Absorption and Mechanical Behavior of Bamboo Fiber Based Polymer Composites
Abstract: The objective of this research is to assess the suitability of bamboo fibers as a sustainable alternative to synthetic and wood fibers for reinforcing polymer composites. Plant-based fibers, particularly bamboo, offer advantages such as biodegradability, lightweight nature, abundance, and impressive mechanical properties that rival or surpass those of conventional materials. In this study, special focus is placed on the extraction of long fibers from Dendrocalamus giganteus, using a combined mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1471–1481 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Comparative Analysis of Eco Friendly Brick with Red Bricks
Abstract: This research presents a comparative analysis between conventional red bricks and eco-friendly bricks made from mud, rice husk, and dry plant leaves. The aim is to evaluate the potential of using sustainable, low-cost, and locally available agricultural waste materials in brick production as an environmentally conscious alternative to traditional methods. The eco-bricks were manufactured without kiln firing, significantly reducing energy consumption and carbon emissions. A series of laboratory tests—including compressive …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 42–46 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Enhancing Mechanical and Durability Properties of Coconut Shell Concrete Using Fly Ash
Abstract: The increasing demand for sustainable and lightweight construction materials has driven research into alternative aggregates for concrete production. This study investigates the mechanical and durability properties of coconut shell (CS) concrete with varying percentages of fly ash replacement. The research evaluates compressive strength, split tensile strength, water absorption, and workability to determine the feasibility of CS concrete as a structural material. Experimental findings indicate that incorporating 10% fly ash (CSF10 …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 19–24 Read article
-
Development of Environmentally Sustainable Epoxy Composites with Sunflower Seed Husk Fillers and Study on Thermal and Moisture Properties
Abstract: This study examines the development and characterization of epoxy composites reinforced with sunflower seed husk (SSH) fillers fabricated using the compression molding technique. SSH fillers were categorized into two distinct particle size distributions, namely, 4–53 µm and 79–463 µm, and were incorporated into the epoxy matrix at varying volume fractions ranging from 5% to 20%. The water absorption behavior of the composites was assessed according to ASTM standards, and thermogravimetric …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 28–37 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Experimental Evaluations of the Tensile and Impact Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers
Abstract: In marine engineering design, polymeric composites reinforced with natural fibers are frequently used. Through hybridization, natural fiber plastic composites' mechanical properties can be improved. Assessing the performance of recycled newspaper fiber (rNF) and rNF/glass fiber (GF) hybrid polypropylene composites is the aim of the current experiment. Using maleic anhydride (MA) as a coupling agent, the effects of GF loading on the impact strength and tensile behavior of composite materials with …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 30–39 Read article
-
Impact of Chemical Conditioning on the Mechanical Performance of Pine Fibre-Reinforced Composites
Abstract: The study examines the effects of treatments like alkaline, silane, and acetylation on enhancing the mechanical strength and reducing water absorption in pine fiber-reinforced composites. Natural fibres, while eco-friendly and sustainable, present challenges in fibre-matrix adhesion due to their hydrophilic nature, impacting composite performance. Chemical treatments were employed to modify fibre surface characteristics, enhance interfacial bonding, and thereby improve mechanical properties. Silane-treated composites exhibited the highest tensile and flexural strengths, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 140–150 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Evaluation of Mechanical Properties of a Sustainable Bamboo Fiber Based Composite
Abstract: This research investigates the process of extracting and using both long and short bamboo fibers from the plentiful Dendrocalamus giganteus species. The fibers were extracted using a synergistic combination of mechanical and chemical methods, which proved to be the most efficient. The process included using an alkali solution and mechanical disintegration to generate superior long and short fibers. Subsequently, these fibers were used to manufacture composites by combining them with …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 20–30 Read article
-
Enhancing Concrete Performance Through Ternary Mixtures: Utilizing SCBA and Silica Fume for Sustainable Construction
Abstract: This study investigates the effects of incorporating Sugarcane Bagasse Ash (SCBA) and Silica Fume (SF) as supplementary cementitious materials on the properties of concrete. Compressive strength, split tensile strength, and water absorption characteristics of ternary blended concrete mixes containing varying proportions of SCBA and SF were examined at curing periods of 7, 28, and 56 days. The results reveal that up to 15% SCBA replacement and 10% SF addition led …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 6–12 Read article
-
Durability Assessment of Self Compacting, Self Curing Concrete Incorporating Crushed Rock Powder and Mineral Admixtures
Abstract: Curing plays a crucial role in achieving the desired strength, characteristics, and durability of concrete. Negligent curing practices can lead to adverse effects on hydration and mechanical properties of concrete. In recent times, self-curing concrete has gained significant attention due to its potential in reducing water loss through the use of self-curing agents. The Present Research study focus on investigation on durability characteristics of self-curing self-compacting concrete using crushed rock …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 25–35 Read article