Mechanical performance
10 articles · search the full text for this term
-
Tensile and Flexural Strength Quantification of Basalt-Reinforced Epoxy Composites Fabricated via Vacuum-Assisted Resin Transfer Molding at Varied Fiber Volume Fractions Description
Abstract: Fiber-reinforced polymer composites have been identified to possess excellent properties that render them very suitable in the aerospace, automotive, marine and renewable energy sectors. However, for the industrially scalable vacuum-assisted resin transfer molding (VARTM) process, optimization of mechanical properties of basalt epoxy composites must be achieved systematically, which means that the effect of the fibre volume fraction(VF) on the mechanical properties of the composite needs to be quantified for different …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Comprehensive Introduction: Epoxy and Polyurethane Floor Coatings—A Critical Evaluation for Modern Industrial Applications
Abstract: Industrial flooring systems are essential for ensuring operational durability, safety, and longevity in demanding environments. Epoxy and polyurethane (PU) coatings represent two predominant technologies, each offering distinct mechanical, chemical, and aesthetic profiles tailored to specific performance requirements. Epoxy systems, formed through the crosslinking of bisphenol-A-based resins with amine hardeners, excel in high-strength, chemically aggressive settings due to their superior hardness, adhesion, and chemical inertness. In contrast, PU coatings, synthesized from …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 14–23 Read article
-
Comparative Study of the Mechanical and Durability Performance of Interlocking Concrete Pavement Blocks
Abstract: Interlocking concrete pavement blocks (ICPBs) have emerged as a durable, modular, and sustainable alternative to traditional pavement systems. Their performance depends heavily on the mechanical characteristics of the concrete mix, block geometry, compaction technique, and curing conditions. This review compiles and analyzes research findings related to the strength, durability, structural behavior, and long-term performance of ICPBs produced using traditional and modified concrete mixes. Key parameters evaluated include compressive strength, split …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 24–30 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Recent Developments in Hybrid and Nanostructured Basalt Fiber Composites: A Review of Mechanical and Processing Innovations
Abstract: This review delivers a critical analysis of recent advancements in basalt fiber-reinforced hybrid composites (BFRHCs), emphasizing their transformative potential for advanced structural and high-performance applications. Basalt fibers, derived from volcanic rock, exhibit superior tensile strength, excellent thermal stability, and chemical resistance, offering a sustainable and cost-effective alternative to conventional glass and carbon fibers. Hybridization of basalt fibers with synthetic (e.g., carbon, glass) and natural fibers (e.g., flax, hemp) results in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 885–894 Read article
-
An Experimental Investigation of High Performance by Using Steel and Polypropylene Fibres
Abstract: This study explores the feasibility of partially substituting conventional cement in concrete with steel and polypropylene fibers to improve mechanical performance and introduce alternative composite materials. Concrete cube specimens measuring 150 × 150 × 150 mm were cast with varying mix designs corresponding to M20 and M25 grades. The experimental program was executed in two distinct phases. In Phase I, control mixes of M20 and M25 grade concrete were prepared …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 7–13 Read article
-
Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance
Abstract: The ever-growing demands of modern mechanical applications necessitate the development of materials with superior mechanical properties. In this research, we delve into the creation and evaluation of Aluminum Metal Matrix Composites (Al MMCs) made via the powder metallurgy route, reinforced with both micro and Nano-scale particles. The key aim is to investigate the possible cooperative effects of this dual reinforcement approach on the mechanical behavior of the composite. Traditional aluminum …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 220–229 Read article
-
Predictive Modeling and Optimization of Tensile and Flexural Strength in FDM 3D Printing Using Decision Trees and Bayesian Optimization.
Abstract: This research investigates predictive modelling and optimization technique for the tensile and flexural strength of PlA (Poly Lactic Acid) in Fused Deposition Modelling (FDM) 3D printing. Employing Decision Trees and Bayesian Optimization enhances comprehension and control of 3D printing process. Precise model predicts PLA material properties based on input parameters. Methodology involves rigorous data preprocessing, encompassing, cleaning, transformation, and normalization. Hyperparameter optimization via grid search systematically explores configurations, optimizing model …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 203–214 Read article