epoxy
19 articles · search the full text for this term
-
Study of Thermal Conductivity and Hardness of Coir Fiber Reinforced Epoxy Composite
Abstract: Researchers are drawn to polymer reinforced natural fibers composite for the development of new materials. The research aims to use waste fibers, specifically coir, to create polymer composite materials. Thermal conductivity and hardness of the composite results are determined under various conditions. Coir fiber is used as the reinforcement material and Coir powder is used as the filler material in the study. In the case of the matrix, the epoxy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1576–1582 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
A Brief Review on the Mechanical and Physical Properties of Abaca Fiber- Reinforced Polymer Composites
Abstract: Recent studies have seen a surge of interest has surged in the sustainability and long-term enduring viability of composites of natural fiber-reinforced polymers. Owing to their elevated specific strength, they are often used in practical physical applications to produce lightweight components. This article reviews and studies the properties, manufacturing processes, and extraction methods of Abaca fiber. Additionally, it provides a brief overview of the preparation and properties, such as mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 622–634 Read article
-
Chemical Modifications and Tensile Properties of Areca Leaf Sheath Fiber Reinforced Polymer Composites: A Comprehensive Review
Abstract: Areca leaf sheath (ALS) fiber is a promising eco-friendly material, offering a sustainable, lightweight, and cost-effective alternative for low-strength applications. Its natural biodegradability aligns well with the growing global demand for environmentally responsible materials. This review explores the transformative effects of chemical treatments, such as alkali, silane, and benzoylation, on the tensile properties of Areca leaf sheath fibers. Among these, alkali treatment consistently demonstrates the most significant improvement in tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 94–106 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Development of Environmentally Sustainable Epoxy Composites with Sunflower Seed Husk Fillers and Study on Thermal and Moisture Properties
Abstract: This study examines the development and characterization of epoxy composites reinforced with sunflower seed husk (SSH) fillers fabricated using the compression molding technique. SSH fillers were categorized into two distinct particle size distributions, namely, 4–53 µm and 79–463 µm, and were incorporated into the epoxy matrix at varying volume fractions ranging from 5% to 20%. The water absorption behavior of the composites was assessed according to ASTM standards, and thermogravimetric …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 28–37 Read article
-
Mechanical and Environmental Performance of Curaua Fiber Composites: A Sustainable Alternative to Wood and PVC
Abstract: This study examines the mechanical behavior of curaua fiber composites, comparing their performance to other materials like wood and PVC. Curaua fibers, sourced from the Brazilian Amazon, demonstrate superior mechanical properties, making them a promising alternative for sustainable composite materials. The composites were fabricated using various methods and subjected to tensile, flexural, and impact tests. Results show that curaua fibers exhibit an average tensile strength of 30.7 MPa, outperforming wood …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 467–477 Read article
-
Affect of Finite Element Modelling on Static Behavior of Underwater Shell
Abstract: The objective of the present study is to compare and contrast different numerical models based on their mesh quality and material properties in predicting the response of an underwater shell under an external pressure of 1 MPa. Two different mesh qualities with the same element size are developed for solid geometries without and with slicing the solids at geometric discontinuities to enhance the element quality. From the static response of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 154–163 Read article
-
Experimental and Numerical Studies on Radial Tensile Strength of Composite Rotor
Abstract: This paper describes the experimental and numerical studies on the radial tensile strength (RTS) of composite rotor. Carbon/epoxy composite rotors were fabricated using a filament winding process and their radial tensile strength was determined by diametric tensile testing of composite C-rings. The radial tensile strength of the composite rotor was measured as ~ 22 MPa and the failure was found to occur circumferentially symmetric about the horizontal plane of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 985–996 Read article
-
Characterization and Fabrication of Particle Board from Banana Fiber and Sawdust as A Hybrid Composite
Abstract: The current global landscape emphasizes the search for eco-friendly and regenerative materials. Utilizing environmentally available fibers in conjunction with polymeric resins through efficient manufacturing processes offers a cost-effective solution with high-quality standards. Polymer matrix composites with fiber reinforcements possess several advantages, including low production costs, ease of fabrication, and improved material properties, making them applicable in a wide range of industrial contexts. This paper emphasizes the creation of Particle boards …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 192–200 Read article
-
Ranking of Epoxy/Kota Stone Dust/Fly Ash Composite Using Integrated AHP-TOPSIS Approach
Abstract: The generation of industrial waste is a significant contributor to environmental pollution. The stone industry is no exception to this, and it is known to produce a significant amount of waste. The Kota Stone Industry in India is one such industry that generates waste. This research article focuses on composite material selection for mechanical and structural applications by fabricating epoxy composites reinforced with Kota stone dust and fly ash using …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 36–42 Read article
-
Effect of Functionalization on glass transition temperature of Carbon Fiber reinforced Epoxy Nanocomposites using MD Simulation
Abstract: As we all know that the mechanical characterization of any material plays a vital role in performance of the material throughout its life cycle. One of the major parameters in calculating the mechanical properties of carbon fiber reinforced nanocomposite is glass temperature. Understanding glass transition behaviour of polymer nanocomposites are crucial for optimizing their mechanical properties and performance. We used “Molecular dynamics simulations” to calculate sequel functionalization effect on glass …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 1–8 Read article
-
A review on micro hot embossed Fresnel lenses
Abstract: Background: Micro replication techniques like HE allows for the large-scale manufacturing of the micro components which use polymers like Polymethyle methacrylate, Polycarbonate, polystyrene as the work material. In the hot embossing process, key parameters include applied pressure, temperature during heating, duration of embossing, and temperature during demolding. Research Objectives: Developing straightforward and affordable methods to produce the micro featured molds needed for the hot embossing is a significant research goal. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 8, 2024 · pp. 12–28 Read article
-
Experimental Study on Load Transfer Mechanism in Columns Retrofitted by Bonding Precast Segments and FRP Wrapping
Abstract: An experimental study was conducted to investigate the load transfer mechanism in columns retrofitted with precast segments and Fiber-Reinforced Polymer (FRP) wrapping. As the demand for structural retrofitting grows, it becomes crucial to comprehend the behavior and effectiveness of retrofit techniques to ensure the safety and integrity of existing infrastructure. The study involved subjecting a series of column specimens to axial compression loads in order to evaluate the load transfer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 153–165 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article