Search
34 articles for “wettability”
-
Experimental Investigations on the Effects of Channel Aspect Ratio and Surface Wettability to Control the Surface-Driven Capillary Flow of Water in Straight PMMA Microchannels
Abstract: AbstractTotal 214 individual straight polymethylmethacrylate (PMMA) microchannels have been fabricated by the maskless lithography, hot embossing lithography, direct bonding technique, and atmospheric pressure air dielectric barrier discharge (DBD) plasma processing. The experimental investigations on the effects of structural properties (channel aspect ratios) and physical properties (surface wettability, capillary pressure and kinetic energy) on the surface-driven capillary flow of dyed water in straight PMMA microchannels is a novel approach in this …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 3, 2016 · pp. 1–12 Read article
-
Effect of Surface Wettability on the Surface-Driven Capillary Flow in SU-8 Microchannels
Abstract: AbstractSU-8 microfluidic devices have been fabricated by the maskless lithography. Passive capillary flow is suitable to manipulate liquid in the lab-on-a-chip systems. The surface-driven capillary flow of dyed water in each microfluidic device has been recorded and analysed. The measured static water contact angles are 72.6°and 81.2° on the hydrogenated amorphous carbon (a-C:H) deposited flat surface and Si-a:C:H deposited flat surface respectively. Either, a-C:H or Si-a:C:H has been deposited on …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 2, 2016 · pp. 24–29 Read article
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Preparation of Transparent and Thermal Resistant Zirconia Reinforced Epoxy Based Polymer Matrix Composite Coatings
Abstract: This study investigates the thermal stability, structural characteristics, optical transparency, and surface wettability of epoxy-based composite coatings reinforced with 2 wt.% zirconia (ZrO₂) nanoparticles. The composite coatings were synthesized using a dip-coating technique on carbon fiber substrates and subsequently subjected to thermal treatments at 300 °C, 400 °C, and 500 °C. Structural analysis using X-ray diffraction (XRD) confirmed the amorphous nature of the epoxy matrix with no significant crystallization or …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 171–177 Read article
-
Surface-Driven Capillary Flow on Microchannel Surface Coated with Diamond like Carbon of Nano-scale Thickness towards the Applications in Statistical Features of Fluid Mechanics
Abstract: In this experimental work, polymethylmethacrylate (PMMA) is the chosen polymer as device material to fabricate the microfluidic devices. PMMA is optically transparent polymer which is a facility to record the microfluidic flow of any dyed working liquid inside the fabricated microchannels. Two individual microfluidic devices are fabricated by lithographic techniques. Dyed water is selected and prepared as working liquid. Leakage-free surface-driven capillary flow of dyed water is recorded corresponding to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 8–12 Read article
-
Experimental Studies on the Passive Capillary Flow of Non-aqueous Working Liquids in PMMA Microfluidic Devices of Rectangular Cross-Sections
Abstract: The polymethylmethacrylate (PMMA) microfluidic devices are fabricated by the maskless lithography, hot embossing lithography and direct bonding technique. The effects of liquid viscosity, surface wettability and channel aspect ratio on the surface-driven capillary flow of non-aqueous working liquids are studied in the fabricated PMMA microfluidic devices. The working liquids are ethylene glycol, isopropyl alcohol (IPA) and ethanol. These experimental studies will be useful to manipulate different non-aqueous working liquids inside …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 29–33 Read article
-
Numerical study of the impact of surfactant/polymer flooding on different reservoir wetting phases.
Abstract: Production of oil and gas by primary drive mechanism has always remained unsatisfactory since a greater percentage of the oil remains in the reservoir. Across the industry and academia various enhanced oil recovery interventions are been sought after to help recover more and more hydrocarbons from the reservoir. A simulation study is conducted using the UTCHEM simulator to help understand the mechanism that affect the various wetting characteristics of the …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 14–25 Read article
-
Educational Review on the Applications of Diamond-Like Carbon Films in Fluid Engineering
Abstract: In this present review paper, author has described the applications of diamond-like carbon (DLC) films in microfluidic devices from the point of view of materials-science. According to author’s earlier reports, the speed of surface-driven water flow is varied by the coating of DLC films in PMMA microfluidic devices. Also, according to author’s earlier reports, the speed of surface-driven water flow is varied by the coating of DLC films in SU-8 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 3, 2019 · pp. 1–7 Read article
-
Relative Permeability Study in Part of Geleki Oil field of Upper Assam Basin
Abstract: Relative permeability is a critical parameter for evaluation of reservoir performance. Relative permeability is a direct measure of the ability of the porous medium to allow flow of one fluid when two or more fluids are present. This flow property is the composite effect of pore-geometry, wettability, fluid saturation, saturation history, reservoir temperature, reservoir pressure, overburden pressure, rock-types, porosity and permeability types. The relative permeability curves are very important in …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 9–14 Read article
-
A Study on the Low Salinity Waterflooding (LSW) in a Part of a Depleted Oilfield of Upper Assam Basin
Abstract: Maximizing the hydrocarbon recovery from depleted oilfields is the biggest challenge now a days which becomes an opportunity for advanced EOR technologies. One of such EOR technology that can promote the oil recovery efficiency from such fields is the low salinity waterfloofing (LSW) which gains the attention of many researchers due to its easiness to use implications, less cost and environment-friendly nature. Different studies have shown that fines migration, pH …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 30–38 Read article
-
Synthesis of Thermal Resistant and Transparent Al2O3 Reinforced Epoxy-Based Composite Coatings
Abstract: This study explores the influence of thermal treatment on the structural, optical, and surface wettability characteristics of epoxy-based composite coatings reinforced with 3 wt.% aluminum oxide (Al₂O₃) nanoparticles. The coatings were synthesized via a dip-coating method on carbon fiber substrates and subjected to controlled thermal treatments at 300 °C, 400 °C, and 500 °C to assess their thermal resilience. X-ray diffraction (XRD) analysis confirmed the structural integrity of the composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 178–183 Read article
-
Polymer-Based Nanocomposite Coatings for Enhancing Solar Photovoltaic Panel Efficiency
Abstract: Environmental factors such as dust deposition, ultraviolet (UV) radiation, and surface reflection significantly reduce the performance of solar photovoltaic (PV) modules. This study investigates the development and performance evaluation of polymer-based nanocomposite coatings designed to improve the optical and surface properties of PV panel glass. A hybrid nanocomposite coating containing TiO₂ and SiO₂ nanoparticles dispersed in a polymethyl methacrylate (PMMA) matrix was synthesized using the sol–gel technique and deposited through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 490–497 Read article
-
Effect of Surface Free Energy on the Surface-Driven Capillary Flow in SU-8 based Glass Microfluidic Devices
Abstract: Surface-driven capillary flow of dyed water is recorded in the SU8 based glass microfluidic devices fabricated by the standard cleanroom processes. The effect of surface wettability on the surface-driven capillary flow is studied in the individual SU8 based microfluidic devices of glass bottom wall and polyimide bottom wall. The surface-driven capillary flow is faster on the glass bottom wall surface due to the higher polar component of solid surface free …
Published in Journal of Polymer & Composites · Vol. 4, Issue 3, 2016 · pp. 1–7 Read article
-
A Ponder & Sedulousness Of Legion Shale Stabilizing Materials In Aqueous Based Drilling Fluid During The Process Of Borehole Strengthening
Abstract: Drilling fluid used while drilling the layers of shale will have the potential of reacting with water which tends to increase stickiness, induce swelling and promote sloughing of the borehole. This results in the reduction of drilling fluid circulation, increased mud loss, increase in torque and drag, reduction in lubricity. This will ultimately result in the increase of Non-Productive Time (NPT) during drilling which in turn increases Capital Expenditure (CAPEX) …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 35–40 Read article
-
Wear Attribute of Aluminium Metal Matrix Composite Reinforced With MWCNT, Produced By FSP, On A Vertical Milling Machine
Abstract: The exceptional properties of Aluminium metal matrix composites (AMMCs) like good hardness, specific strength, enhanced wear rate made huge demand in the automobile and aerospace industries. The classical methods of manufacturing AMMCs leave problems at the interface of matrix and reinforcement segregation, like an agglomeration of reinforcements, wettability etc. To overcome this, an alternate, innovative method of fabricating aluminium matrix surface composites has been invented, which is termed friction stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 525–539 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
Optimizing Glass to Metal Composite Seal Performance: An integrated Approach with Artificial Neural Network, Multiple Regression, and Taguchi
Abstract: Composite materials, particularly glass to metal composites, are critical components in solar receiver tubes, where vacuum leakage can significantly compromise the efficiency of solar plants. This research addresses the technical barriers associated with the development of durable and high-quality glass to metal composite seals. We investigate the principles that can enhance the physical and chemical properties of these composite seals, focusing on the incorporation of TiO2 and MgO nanoparticles into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 418–435 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Elucidation of Physical Structural Stability of Nickel Nanoparticles Additive-Based Magnetorheological Grease
Abstract: This study investigates the influence of nickel nanoparticles on the physical properties and structural stability of magnetorheological grease (NMRG) as a smart composite. The incorporation of nickel nanoparticles aims to mitigate issues commonly observed in conventional magnetorheological grease (MRG), including particle aggregation within the fibrous matrix, limited material performance, and deformation instability. NMRG samples containing 1–5 wt% nickel nanoparticles were prepared using a mechanical stirring method. The tests focused on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–215 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article