Search
25 articles for “ultra-wide band (UWB)”
-
Study on EBG Structures and Application in UWB Band Pass Filter
Abstract: EBG automation has turn into important development in the field of microwave and RF because of its exclusive band gap attribute at convinced frequency areas. The survey of this paper shows various EBG structure and its operations in tract with microstrip antenna and filters along with EBG structure is planned to procure solid UWB band pass filter. The counterfeit is performed by Agilent ADS software.
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 5–8 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
Design of Ultra-Wide Band Slotted PIFA for Wireless Devices
Abstract: The design of an ultra-wideband planar inverted-F antenna (PIFA) is proposed for mobile phone applications in this paper. The different slots are introduced on radiating patch and ground plane. The volume of the radiating antenna is 40x40x3.5 mm3 which is small as compared to reported work. The ultra-wide bandwidth with acceptable return loss –6 dB is obtained from 4.6 to 30 GHz with good matching and radiation characteristics. Different performance …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 1–6 Read article
-
UWB Band Pass Filter Using Dielectric Resonator
Abstract: A novel ultra-wideband (UWB) bandpass filter is proposed and implemented using a dielectric resonator, with aim of transmitting the signals in the whole UWB passband of 3.1–10.6 GHz. Ultra-wideband (UWB) is a promising innovation for some remote applications because of its expansive transfer speed, great proportion of transmission information and low power cost. The filter is compact in size with a great simplicity in assembly and integration. The developed UWB …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 3, 2016 · pp. 25–29 Read article
-
Planar UWB Antenna for 5 GHz ISM Band
Abstract: AbstractThe Ultra-Wide Band (UWB) technology used for high data rate with low power levels for many wide applications which mainly includes short range, wide bandwidth communications. The Planar UWB antenna is designed for 5GHz Industrial, Scientific and Medical (ISM) band. These bands are specially dedicated to industrial, scientific and medical applications other than telecommunications. ISM applications like Microwave ovens, RF process heating and medical diathermy application. Proposed antenna has VSWR …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 1–6 Read article
-
Beveled Shaped Filtenna for Ultra Wideband Applications
Abstract: AbstractA compact microstrip line fed beveled shaped filtenna is presented for ultra-wideband application. It is intended to work in the frequency range of 3.10 to 11.75 GHz and having the size of 30.5× 25×1.6 mm3. The filtenna consists of a modified three resonators based band pass filter integrated into the feed line of the modified antenna. In addition to this, a modified semicircular like the ground plane is also present. …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 1–10 Read article
-
Design of a Fractal Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: Ultra wide band frequency allocation of 5.3–9.2 GHz spectrum by Federal Communications Commission (FCC) presented myriad applications of exciting opportunities and challenges for design in the communication arena, including antenna design. The compact antenna designs with operating bandwidths of more than 100% are a challenging demand for the current wireless scenario. This can be easily met with fractal boundaries by using wide slot antennas. In this paper, fractal slot antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 19–22 Read article
-
Design of UWB Microwave Filter Using Quarter Wavelength Short-Circuited Stub
Abstract: UWB technology has progressed a lot in recent years for high speed wireless communications and other applications which need higher data rate and wider bandwidth. In this paper UWB bandpass filter is designed using quarter wavelength (λ0/4) short circuited stubs to improve the performance of UWB. Designed UWB filter gives higher performance and lower insertion loss in UWB spectrum. 5th order UWB bandpass filter is designed using CST MWS simulation …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 32–36 Read article
-
An Ultra Wideband Hexagonal Patch Antenna with Enhanced Bandwidth
Abstract: A microstrip line feed Ultra-Wideband (UWB - 3.1 to 10.6 GHz) hexagonal patch antenna with enhanced bandwidth was presented in this article. The enhancement of bandwidth (BW) is achieved by defecting the partial ground structure. The antenna is designed by FR-4 substrate with εr(dielectric constant) = 4.3 & Tan δ (loss tangent) = 0.025.Initially, a conventional hexagonal patch with a partial ground plane produces a – 10 dB bandwidth of …
Published in Recent Trends in Electronics Communication Systems · Vol. 9, Issue 1, 2022 · pp. 11–20 Read article
-
Review Paper of Designing of CPW Fed Micro-strip Patch Antenna for UWB and Bluetooth Application
Abstract: A compact size coplanar waveguide (CPW)-fed micro strip antenna is proposed for radiation of the frequency spectrums 2.36 to 2.49 GHz (Bluetooth) and 3.1 to 10.6 GHz (UWB-Ultra wideband) covers. Both are unlicensed bands but in UWB band there are two licensed bands i.e. WLAN and Wi-MAX present in the frequency range of 5.12 to 5.825 GHz and 3.4 to 3.7 GHz respectively. In this design we have single CPW-fed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 35–40 Read article
-
INVESTIGATION OF MICROSTRIP BANDPASS FILTER FOR S-BAND APPLICATION
Abstract: Abstract— Microstrip bandpass filter is presented in this paper for S-band application. The filter employs the microstrip line with port matching topology and plane ground to operate in S-band frequency range. CST Microwave Studio simulator is used for simulation and Rohde & Schwarz Vector Network Analyzer is used for measurement. Filter has size of 120 mm x20 mm and fabricated using low cost FR-4 substrate of 1.6 mm thickness and …
Published in Current Trends in Signal Processing · Vol. 8, Issue 1, 2018 · pp. 28–32 Read article
-
Design of a Stacked Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: The paper presents a stacked T-shaped Aperture coupled microstrip antenna designed for ultra-wide band wireless applications. The proposed UWB antenna covers two frequency bands as of 2.49 to 2.9 GHz and 6.85 to 20 GHz and used for the various applications like Bluetooth, Zig-Bee (2.4 GHz), C band (6 to 8 GHz), X band (8 to 12 GHz), Ku band (12 to 18 GHz) and Satellite communication. The stacked antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 12–16 Read article
-
A Compact CPW-fed Quadruple-band-notched Antenna with Concentric Annular-rings for UWB Applications
Abstract: In this paper, a compact coplanar waveguide (CPW)-fed quadruple-band-notched antenna with concentric annular-rings for ultra-wideband (UWB) applications is presented. The proposed antenna consists of four concentric annular-ring resonators, a circular shape radiating element and a CPW feed line. The quadruple band rejection is easily achieved by controlling the widths and radii of four concentric annular-ring resonators. Through the exception of four stop-bands at 3.29 to 3.7 GHz, 5.07 to 5.92 …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 38–47 Read article
-
Compact Printed Coplanar Waveguide-fed UWB/Bluetooth Integrated Antenna for Wireless Personal Area Network Communication
Abstract: AbstractA compact integrated Bluetooth and ultra-wideband (UWB) coplanar waveguide (CPW)-fed antenna is presented and discussed. In this paper, the designed antenna has got specialty having wide coverage of Bluetooth and UWB frequency band both successfully giving optimum performance and above all small size. It has been designed very compact retaining all the standard parameters like VSWR, radiation pattern and gain to the acceptable level. The integrated dual-band antenna covering 2.4–2.484 …
Published in Journal of Communication Engineering & Systems · Vol. 3, Issue 2, 2013 · pp. 9–14 Read article
-
Design and Performance Analysis of an UWB Wearable Patch Antenna for WBAN Applications
Abstract: In this paper we represent an ultra-wide band wearable textile antenna for body area network. The proposed antenna consists of a decagonal radiating patch and a partial ground plane with a square slot. For textile antenna, the textile materials and the planer shapes provide a smooth integration into clothing while preserving the characteristic properties of the textile. The ultra-wide band for these types of antenna is achieved by optimizing the …
Published in Journal of Communication Engineering & Systems · Vol. 7, Issue 3, 2017 · pp. 1–7 Read article
-
Advanced 4-Element UWB-MIMO Antenna Design: Achieving High Isolation and Multi-Band Rejection for Advanced Wireless Applications
Abstract: In this study, we present the design, fabrication, and analysis of a step-by-step Ultra-Wideband (UWB) Multi-Input Multi-Output (MIMO) antenna operating from 3 to 14 GHz. The antenna consists of four elements, each characterized by high isolation and equipped with four band-rejection features. These elements are implemented on a Rogers substrate with εr=3. Each antenna element is a modified rectangular patch, incorporating partial ground etching to achieve wider bandwidth. Two sets …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 1, 2025 · pp. 40–62 Read article
-
A Novel CPW-Fed Triangular Fractal Antenna with Round Corners for UWB applications
Abstract: This paper presents a novel CPW(coplanar waveguide)-fed triangular fractal antenna with round corners for UWB(ultra wideband) applications. The overall size of the proposed antenna is 20×23×1.6 mm3. The impedance bandwidth of the antenna is effectively improved by adding fractal elements at the edges. Also, rounding corners of triangular fractal antenna leads to an improvement in impedance bandwidth. And the impedance bandwidth is enhanced by adding triangular strips on two ground …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 1–7 Read article
-
Comparison of Ultra Wide Band Indoor Multipath IEEE 802.15.3 Channel Model
Abstract: ABSTRACT A very large bandwidth of frequency (3.1–10.6 GHz) has been allocated to UWB systems. A single-band UWB signal propagates differently in the lower and upper bands of the spectrum due to the size of its bandwidth. The lower part of the signal can be obstructed more easily and the man-made interferences are not homogeneously distributed over the whole spectrum. The first experimental results obtained for a UWB channel show …
Published in Journal of Communication Engineering & Systems · Vol. 2, Issue 3, 2012 · pp. 20–25 Read article
-
A Hexagonal Sierpinski Gasket Antenna with a Microstrip Feed Line and a Stub for UWB Applications
Abstract: In this paper a Sierpinski gasket hexagonal antenna is proposed with a feed line having a stub attached to it. Three iterations of the proposed antenna geometry were done and with this improved feeding technique for four resonant bands of operation from 2.86 to 3.3 GHz, 3.758–4.313 GHz, 7.514–8.5468 GHz and 12.352–10.976 GHz were obtained. The antenna is suitable for ultra wideband (UWB) and radiolocation applications. The proposed antenna was …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 1, 2015 · pp. 14–18 Read article
-
A CPW Feed Compact UWB Antenna with Five Band Notches
Abstract: AbstractA novel small CPW feed UWB antenna with five notch bands is projected to suppress the potential interferences in ultra-wideband systems. This projected antenna has a small dimension of 30x32x1.6 mm3 and an operating bandwidth (VSWR<2) from 2.8 to 11.6 GHz. By introducing five U-shaped slots, five notches are achieved in WiMAX (3.1–4 GHz), WLAN (5–5.4 GHz and 5.7–5.9 GHz), X-band downlink (7.2–7.75 GHz), and ITU service band (8–8.4 GHz). …
Published in Journal of Communication Engineering & Systems · Vol. 7, Issue 2, 2017 · pp. 27–33 Read article