Search
22 articles for “thermosets”
-
Autonomous Agentic AI for Adaptive Cure Optimization and Defect Prevention in Thermoset Polymer Composite Manufacturing
Abstract: Thermoset polymer composites occupy a central position in modern structural manufacturing, from aircraft fuselages to wind-turbine blades. Despite progress in resin chemistry and fiber architecture, the “cure process” that transforms compliant preforms into load-bearing structures remains difficult to manage. Manufacturers encounter ‘voids’, “interlaminar delaminations”, and “spring-back distortion” when curing complex or thick-section parts. The cause is not ignorance of the relevant physics, but rather that ‘temperature’, ‘chemistry’, ‘rheology’, and ‘mechanics’ …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 301–320 Read article
-
Assessment of Chlorides In The Water Samples And Its Absorption By Thermosetting Polymer Phenol Formaldehyde Resin
Abstract: Assessing chloride levels in water samples is critical for monitoring water quality and ensuring environmental and public health protection. This study presents a comprehensive methodology for estimating chloride concentrations in water samples through various analytical techniques, including titration. Results obtained from each method were compared and discussed to evaluate their accuracy, and applicability in different environmental settings. The data shows that the samalkot drinking water sample has a relatively high …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 91–98 Read article
-
An Overview of Natural Fibers and Fillers Reinforced Polymer Composite Materials
Abstract: Polymer composite materials reinforced with natural fibers and fillers are drawing wide spread attention due to their sustainability, eco-friendliness, and a replacement of conventional synthetic composites. Such materials combine strength and stiffness of natural fibers like jute, hemp, flax, and sisal with flexibility and durability of polymer matrices, including thermoplastics, and thermosets. The paper reviews some developments, properties, and applications of natural fiber-reinforced polymer composites (NFRPCs), focusing on their merits, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 78–92 Read article
-
Cardanol Glycidyl Ether in Advanced Materials: Recent Progress, Synthetic Strategies, and Future Perspectives
Abstract: Cardanol glycidyl ether (CGE), a bio-based precursor and epoxy derived product has been emerged as a promising sustainable alternative to conventional petroleum-based epoxy materials. Due to the presence of a phenolic hydroxyl group and an unsaturated aliphatic side chain, cardanol can be effectively undergoes glycidylation to produce reactive epoxy monomers that has excellent flexibility, hydrophobicity, low viscosity, and notably good chemical resistance. In recent years, CGE-based systems have attracted remarkable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Looking into new ideas in green chemistry
Abstract: Green chemistry has become a revolutionary way to change chemical processes such that they have less of an effect on the environment while still being efficient and cost-effective. This article looks at new developments in green chemistry that go beyond small changes and offer completely new ways to build chemicals that are good for the environment. There is a lot of focus on innovative catalytic systems, sustainable feedstocks, reaction pathways …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 10–18 Read article
-
Experimental Study on Effect of Recycled Epoxy Powder Reinforcement on Tensile Behavior of Acrylonitrile Butadiene Styrene
Abstract: Thermosetting plastic found wider application in the field of Aerospace, Aircraft, Wind Turbines, Marine and construction due to their long life, light weight and high strength. Among thermosets, epoxy is the major contributor. The world epoxy resin usage is almost 3.6 million tons in the year 2022 and it may cross 5.91 million tons by 2029. At their end of life most of it goes to land filling which leads …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–315 Read article
-
Comprehensive Review of EPDM (Ethylene Propylene Diene Monomer) Rubber
Abstract: The terpolymer elastomer known as ethylene propylene diene monomer (EPDM) is made up of ethylene and propylene with trace amounts of a non-conjugated diene as a third monomer. This elastomer was created using the idea of limited olefinic functionality, which is brought about by diene monomer incorporating unsaturation into the polymer backbone. This random elastomeric copolymer, which has a fully saturated polymer backbone, has intriguing qualities such as good heat …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 2, 2025 · pp. 27–34 Read article
-
Replacement of Fine Aggregate in Concrete Using Bakelite Powder: A Review
Abstract: This review explores the feasibility of incorporating Bakelite, a thermosetting synthetic polymer known for its durability, heat resistance, and insulating properties, as a partial replacement for fine aggregate in concrete. The increasing focus on sustainable construction practices has driven interest in utilizing industrial waste materials like Bakelite to reduce environmental pollution while enhancing concrete performance. Bakelite, often discarded as industrial waste, presents an opportunity to improve the mechanical and durability …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 6–10 Read article
-
Advances in Polymer Chemistry: The Role of Polymer Composites in Modern Applications
Abstract: Polymer composites have gained immense significance in various industries due to their superior mechanical, thermal, and chemical properties, making them highly versatile materials. These composites are formed by combining polymer matrices with reinforcing agents such as fibers, nanoparticles, or other fillers to enhance specific properties. The field of polymer chemistry plays a crucial role in the development and optimization of these materials, ensuring their suitability for diverse applications. This paper …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 51–56 Read article
-
Sustainable Epoxy Composites Enhanced by Cellulose Nanocrystals for Structural and Thermal Applications
Abstract: This study presents the advancement and behaviour analysis of sustainable nanocomposites reinforced with cellulose nanocrystals (CNCs), a biodegradable and high-aspect-ratio nanofiller derived from microcrystalline cellulose. CNCs were incorporated into a bisphenol-A-based epoxy matrix at varying concentrations (0, 1, 3, 5, and 7 wt%) to assess their influence on mechanical, thermal, and viscoelastic properties. The tensile strength of the composites increased significantly, from 45 MPa for neat epoxy to 65 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 126–134 Read article
-
Polymer Chemistry and Composite Materials in Advanced Dental Flask Design
Abstract: This paper explores the role of polymer chemistry and composite materials in the development of a novel dental flask, emphasizing the advantages of polymer-based materials in dental prosthetic processing. Traditional dental flasks, often made from metals such as brass or stainless steel, are prone to issues like corrosion, dimensional instability, and wear over time. By incorporating advanced polymer composites, including chromium-coated materials, the novel dental flask offers enhanced durability, improved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 158–165 Read article
-
Fabrication and Testing of Physical Behavior of Coconut Shell Micro Particulate and Walnut Shell Micro Particulate Reinforced Epoxy Composites
Abstract: Enhancing the physical characteristics of high-performance materials is largely dependent on the reinforcement of polymers by microparticles. The physical behavior of polyester composites containing coconut and walnut shell microparticles was thus investigated in order to create an engineering material for industrial use. Most researchers investigated the flammability test of fiber bio-composites only. There is a possibility that two particular polymers embedded in a thermoset polymer matrix could provide the lowest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 592–603 Read article
-
Polyurethane: Chemistry, Production, Applications, and Future Prospects—An Overview
Abstract: Polyurethane (PU), a class of versatile polymers, has emerged as one of the most significant materials in modern industry owing to its remarkable mechanical strength, elasticity, durability, and resistance to abrasion, chemicals, and environmental degradation. Its wide range of tunable properties has made PU indispensable across multiple sectors, including fashion, automotive, manufacturing, biomedical, coatings, and construction. This review emphasizes the diverse applications of polyurethane and explores how its unique chemistry …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 17–25 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
A Comprehensive Review of Green Hybrid Polymer–Inorganic Composite Systems Incorporating Palm Tree Ash and Titanium Dioxide
Abstract: The increasing requests on sustainable and high performance systems have motivated extensive investigations on polymer-based hybrid systems with bio-derived and/or functional inorganic fillers. In this review, the importance of palm tree ash (PTA) and titanium dioxide (TiO₂) as synergistic fillers for polymer–inorganic hybrid composites, particularly about structure–property relations, interfacial adhesion and durability performance, is discussed. Agricultural waste-derived palm tree ash (PTA) plays as a silica-rich filler which not only aids …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1811–1820 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Sustainable Supply Chain Models for Polymer and Composite Manufacturing: A Data-Driven Assessment of Circular Material Flows
Abstract: Polymer and composite manufacturing is faced with growing demands in waste reduction, resource management, and making a shift towards circular economy principles. Although urgent, the adoption of data-driven tools in each step of a supply chain to facilitate efficient cyclic material flows is low. This paper designs and empirically analyzes sustainable supply chain design in polymer and composite production with a focus on digital traceability, closed-loop and material recovery, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 54–71 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
AI-Integrated Graphene-Modified Polymer Interfaces for Real-Time Crack Detection and Autonomous Healing in Smart Concrete Structures
Abstract: This study presents the design and development of a graphene-reinforced multifunctional polymer composite interface engineered for structural reinforcement, self-sensing, and autonomous healing applications in cementitious systems. A thermosetting polymer matrix embedded with graphene nanoplatelets (0.25–1.5 wt.%) was developed to establish a conductive polymer nano-composite network. Electrical characterization confirmed a distinct percolation threshold at ~0.6–0.8 wt.%, beyond which a sharp increase in conductivity was observed due to the formation of interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 30–42 Read article
-
Polymer Chemistry Solutions for C&D Waste Stabilization and Reuse in Construction Materials
Abstract: The construction and demolition (C&D) waste is among the largest streams of solid-waste in the world, which has posed significant environmental, economic, and resource utility issues. Common waste disposal techniques such as landfill and low-grade recycling contribute to destruction of the material and wasteful characteristics. Polymers as methods of stabilizing mixed C&D waste and converting it into a high-performance construction material have become one of the promising methods in recent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article