Search
208 articles for “thermal performance integration”
-
CFD Analysis: Double Pipe Heat Exchanger, Latent Heat Storage, and BIM-CFD Integration
Abstract: This is a review work covering four research papers. Heat exchangers transport thermal energy across fluids; research in SolidWorks 2014 compared flow simulation to the effectiveness-NTU approach. Slow PCM charging/discharging is a global concern in latent heat storage; research on the influence of flow rate and temperature on melting and solidification durations discovered efficiency in a triple tube heat exchanger design. Advances in computational fluid dynamics for forecasting separated flows …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 19–24 Read article
-
Exploration of Advanced Phase Change Materials for Thermal Energy Storage in Renewable Energy Systems: An Overview
Abstract: Phase Change Materials (PCMs) are increasingly vital for improving thermal energy storage (TES) systems. Their ability to absorb and release heat efficiently makes them ideal for renewable energy applications, enhancing energy efficiency, reducing waste, and supporting sustainable energy solutions across various sectors like solar power and building temperature regulation. Their ability to store and release latent heat during phase transitions makes them ideal for addressing the intermittency of renewable energy …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 10–14 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
Quasi-Static Thermal Stress Analysis in a Thin Circular Cylinder Due To Internal Heat Generation Under Transient Temperature Conditions
Abstract: This paper is concerned with inverse quasi-static thermal stress analysis in a thin circular cylinder due to internal heat generation under transient temperature conditions. The internal heat generation is modeled as a cylindrical surface heat source located in the annular region along the axial length of the cylinder. This source is placed concentrically inside the cylinder and begins releasing heat spontaneously at a specific point in time. The thin circular …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 17–28 Read article
-
Thermodynamic Optimization and Exergy-Based Performance Analysis of Hybrid Thermal Management Systems for Electric Vehicles
Abstract: The transition toward sustainable transportation has brought electric vehicles (EVs) to the forefront of modern engineering innovation. Despite their environmental benefits and improved energy efficiency, EVs face major thermal challenges that affect performance, safety, and durability. Efficient thermal management of batteries, power electronics, and electric drive systems is vital to ensure reliability under diverse operating conditions. This study presents a detailed thermodynamic optimization and exergy-based performance analysis of hybrid thermal …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 2, 2025 · pp. 19–23 Read article
-
Advanced Polymer Composite Coating for Thermal Performance and EEE Improvement of a Solar Energy Harvesting System
Abstract: The integration of carbon-based nanomaterials with polymer matrices presents a promising route toward advancing solar energy harvesting technologies. In this study, nanoparticle-blended polymer composite coatings are examined to evaluate the performance of FPSC, utilizing an unconventional collector setup and a multiple-carbon-based nanoparticle-blended paint polymer. Nanomaterial provides a crucial alternative for enhancing their thermal efficiency. The research findings reveal that the deformation of nanomaterials improves the heat efficiency of solar collectors. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1197–1222 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Low-Grade Heat Recovery: Emerging Materials and Systems for Efficient Utilization
Abstract: Low-grade heat (LGH), generally characterized by temperatures below 200°C, constitutes a significant portion of wasted thermal energy in industrial, commercial, and even residential processes. Despite its vast availability, the efficient recovery and utilization of LGH remains underdeveloped due to its inherently low exergy content and the limitations of traditional heat recovery technologies. The creation of cutting-edge materials and creative system-level approaches for LGH recovery has accelerated significantly as companies continue …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 1, 2025 · pp. 24–29 Read article
-
Analysis of Hybrid Photovoltaic Thermal (PV/T) Integrated Solar Dryer: An Experimental Validation
Abstract: In this study, a hybrid photovoltaic thermal (PV/T) integrated solar dryer has been designed, developed, and experimentally analyzed to evaluate its performance in real-world climatic conditions. The system incorporates a UV-stabilized sheet mixed-mode tent house structure, installed on the rooftop of a building located in Bhilai, Chhattisgarh, India. The dryer is equipped with a thermal collector directly connected to the drying chamber to enhance heat transfer efficiency. Experiments were conducted …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 1–6 Read article
-
Comprehensive Thermal and Environmental Investigation of An Enhanced Evacuated Tube Solar Water Heater with Wavy Tape and Latent Heat Storage
Abstract: Evacuated tube solar collectors (ETSCs) are widely used for thermal energy applications; however, enhancing their thermal and exergetic efficiency remains a challenge. This study investigates performance enhancements through structural and material alterations. Four ETSC cases were tested experimentally, case-1: a standard ETSC, case-2: Wavy tape (WT) inserted ETSC, case-3: Phase change material (PCM) integrated ETSC, and case-4: Dual-Enhanced ETSC (PCM + WT). A binary eutectic PCM was utilized for latent …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 1–16 Read article
-
Energy Savings due to passive strategies in contemporary high-rise residential building hot and dry climate
Abstract: Globally, the development of sustainable design techniques is becoming imperative, particularly with the idea of high-rise structures to keep up with the rapidly expanding cities. Approaching design sustainably by developing various sustainable methods is becoming necessary worldwide. Strategies for passive design may be useful in achieving the social, economic, and environmental goals of sustainability. This paper discusses the importance of passive design strategies in high-rise buildings, particularly in the context …
Published in International Journal of Environmental Planning and Development Architecture · Vol. 1, Issue 2, 2023 · pp. 99–103 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
Integrated Optimization of Solar Photovoltaic Systems Using Taguchi Method and Computational Fluid Dynamics for Enhanced Efficiency
Abstract: The transition to renewable energy demands efficient and reliable photovoltaic (PV) systems to meet rising global energy needs. This study presents an integrated optimization framework combining the Taguchi method and Computational Fluid Dynamics (CFD) to improve the thermal and electrical performance of solar PV systems. A structured experimental design using an L9 orthogonal array evaluates the influence of three key parameters—material type, panel thickness, and cooling mechanism—on system efficiency. Analysis …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 3, 2025 · pp. 10–25 Read article
-
Spintronic Logic Device Modeling and Energy Optimization for Beyond-CMOS Computing Systems
Abstract: The continuous scaling limitations of conventional CMOS technology have accelerated the exploration of alternative computing paradigms for next-generation low-power and high-performance systems. Spintronic logic devices have emerged as a promising solution due to their non-volatility, ultra-low switching energy, high integration density, and compatibility with beyond-CMOS architectures. This research presents a comprehensive modeling and energy optimization framework for spintronic logic devices applied in beyond- CMOS computing systems. The proposed work investigates …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 4, Issue 1, 2026 Read article
-
Harnessing Marine and Agro-Waste Resources: Bioengineered Seaweed Polysaccharide–Coconut Films for Next-Generation Sustainable Packaging
Abstract: The increasing demand for biodegradable alternatives to petroleum-based plastics has led to significant interest in marine biopolymer-based packaging materials. This study focuses on the development of eco-friendly biocomposite films by reinforcing carrageenan, extracted from Kappaphycus alvarezii, with alkali-treated coconut at varying loadings (5%, 10%, and 15% w/w). The films were fabricated via solvent casting and subjected to comprehensive characterization. Mechanical analysis revealed substantial enhancement in tensile strength from 21.3 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 217–227 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article