Search
45 articles for “textile material”
-
Development of Durable Panels from Consumer Clothing and Garment Cutting Waste Textile Materials
Abstract: This paper examines the creation of eco-friendly durable panels developed from recycled textile waste. The primary sources of textile waste are, the used consumer clothing materials and garment cut waste fabric materials. The accumulation of textile waste affects our environment and increases the landfills. In this research, we developed a new process and method to recycle the textile waste and transform them into durable panel, a sustainable alternative to traditional …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 52–63 Read article
-
Comparative study of the Antibacterial Properties of Modified Textile Materials with Different Metal Nanoparticles
Abstract: A number of metal particles have proven antibacterial properties. In this study, a comparative analysis was made of two types of metal particles: zinc oxide and titanium oxide nanoparticles respectively, which were deposited on cellulose material and were fixed by means of a cross-linked gelatin hydrogel. Three methods were applied under different reaction conditions for obtaining the biocomposite materials. The biomaterials were investigated by means of scanning electron microscopy, transmittance …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 92–101 Read article
-
A Review on Wearable Textile Antenna
Abstract: In today’s world, importance of wearable textile antennas has gained importance for healthcare and pervasive applications. Utilization of wearable textile materials for the development of microstrip antenna segment has been rapid due to the recent miniaturization of wireless devices. The use of wearable textile antennas is increasing rapidly in wireless applications. A wearable antenna is meant to be a part of the clothing used for communication purposes, which includes tracking …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 37–41 Read article
-
Analyzing the Role of Fiber Composition in Drying Behavior: A Comparative and Predictive Approach
Abstract: This research presents a comprehensive analysis of the drying behavior and thermal response of three distinct fabric types: 100% Cotton, 100% Polyester, and a Polyester blend (65/35), under meticulously controlled environmental conditions. The Polyester blend (65/35) consists of 65% Polyester and 35% Cotton, combining characteristics of both fibers. The investigation focuses on understanding how fiber composition impacts drying time, moisture retention, and thermal characteristics. Experimental trials were conducted using standardized …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 1–11 Read article
-
Textile Treatment processes using Plasma as the Fourth State
Abstract: Green Treatment of Textiles using Fourth State Plasma Technologies is on the focus worldwide with promising environmental incentives. As reported globally, the latest technology of the century being the Plasma Technology has been applied to Textiles almost in all fields from production, processing and treatment. The textile material will be awarded with special properties on processing or treating through the Plasma technology.
Published in Trends in Machine design · Vol. 5, Issue 3, 2018 · pp. 34–36 Read article
-
Design and Performance Analysis of an UWB Wearable Patch Antenna for WBAN Applications
Abstract: In this paper we represent an ultra-wide band wearable textile antenna for body area network. The proposed antenna consists of a decagonal radiating patch and a partial ground plane with a square slot. For textile antenna, the textile materials and the planer shapes provide a smooth integration into clothing while preserving the characteristic properties of the textile. The ultra-wide band for these types of antenna is achieved by optimizing the …
Published in Journal of Communication Engineering & Systems · Vol. 7, Issue 3, 2017 · pp. 1–7 Read article
-
Review on Azo-Compounds and Their Applications
Abstract: Azo-colored compounds that form the basic structure of many synthesized compounds in many fieldsof chemistry, especially coordination chemistry, as they contain a group (-N=N-). These dyes arewidely used as colorants, as they contribute to nearly 50% of artificial colors. Also in manyapplications such as ink-jet printing, optical imaging, and biomedical diagnostics , azo dye containsone or more D-π-A systems that can produce various colors by changing the electron donation (D) …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 2, 2021 · pp. 8–16 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article
-
A Review—A Gift that Counts: Charity Automation
Abstract: AbstractWe all like to go to shopping department shops and buy the first-class satisfactory branded clothes for ourselves; devour scrumptious food at the fine restaurants and stay an expensive life inside one’s personal difficult earned home. The three words are mere words and none of us might reflect on consideration on them in our busy day-to-day agenda. For us, food is to devour, garb is to wear and shelter is …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 3, 2019 · pp. 1–7 Read article
-
Polymer Phase Change Materials: Innovations, Applications, and Future Directions
Abstract: Polymer-based phase change materials represent a significant advancement in energy storage and thermal management technologies due to their ability to absorb, store, and release heat during phase transitions. This article reviews recent innovations in polymer phase change materials, focusing on the synthesis, characterization, and performance enhancement techniques. The development of polymer composites with enhanced thermal conductivity, improved phase change enthalpy, and extended thermal cycling stability is discussed. Additionally, the integration …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 2, 2024 · pp. 1–7 Read article
-
An Experimental Study on The Effect of Geopolymeric Composite Reinforcement on Soil Subgrade for Flexible Pavements
Abstract: The use of geo-synthetics, such as geotextiles, has the potential to enhance the inherent engineering and geotechnical properties of subgrade soils that exhibit poor conditions. The use of geotextiles in pavement construction has many advantages, including enhanced subgrade strength and the ability to construct flexible pavements that are both efficient and cost-effective since it reduces the pavement thickness. In the realm of flexible pavement system development, the significance of subgrade …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 132–140 Read article
-
Survey in Hydrazine and its Preparation, Reactions, and Their Applications
Abstract: This review concerned with hydrazine derivatives; Hydrazine is an important chemical compound used in jet engine and rocket fuel. Therefore, the European Union prohibits its sales to the developing world at 100% concentration and only permits its sales at 20-25% concentration. It is also used in industry to produce chemicals for textiles, agriculture, photographic development materials, and blowing agents used in the manufacture of foam rubber. It is also used …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 1, 2026 · pp. 27–34 Read article
-
Study of the Effect of Rice Husk As An Active Low-cost Adsorbant for Textile Wastewater Treatment
Abstract: Textile wastewater contains different colors which are harmful to the environment. Activated carbon can be used for the decolorization of textile wastewater. Most of the textile plants do not use the activated carbon due to its expensive cost and still it was classified as imported item. Low-cost adsorbant produced from locally available materials can solve this problem. This paper describes the color removal of textile wastewater by adsorption process using …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 3, 2014 · pp. 16–19 Read article
-
Development of Bio-Based Smart Textiles with Temperature Adaptive and Self-Cleaning Properties
Abstract: This research explores the development of bio-based smart textiles that integrate both temperature-adaptive and self-cleaning properties, responding to the growing need for sustainable and functional innovations in the textile industry. Unlike conventional fabrics, smart textiles provide multifunctional responses to environmental stimuli such as heat, light, and moisture. The focus of this work is on combining renewable natural fibers, biodegradable polymers, and environmentally friendly additives to design textiles that are not …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 3, 2025 · pp. 1–7 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
A Review on Zinc Oxide Nanoparticles Based on Photocatalytic Activity
Abstract: The Zinc Oxide (ZnO) is a photocatalyst which is available for photoreaction system by using the metal oxide (MO) degradation present ultraviolet irradiation at high temperature. The removal rate of metal oxide (MO) was observed in zinc oxide has been reached up to 99.73, 99.29 and 99.70%. The composite ratio was increased from 2:1 to 4:1 after 30 minutes and continuously this ratio was also increased up to 5:1. Hence …
Published in Research and Reviews : Journal of Computational Biology · Vol. 8, Issue 1, 2019 · pp. 13–25 Read article
-
Assessment of Hygiene Degradation and Expiry Indicators in Household Bedding Products
Abstract: Household bedding products such as pillows, bedsheets, blankets, and mattresses play a crucial role in ensuring comfort, sleep quality, and overall health. However, prolonged use without timely replacement or proper maintenance can result in hygiene degradation, leading to the accumulation of dust, allergens, microorganisms, and chemical wear. This study aims to assess the factors contributing to hygiene decline and to identify reliable indicators of expiry for common bedding items. The …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 4, Issue 1, 2026 · pp. 33–47 Read article
-
Wearable Rectenna Array for Wireless Power Transmission
Abstract: This paper explains about design of wearable antenna array which is used for receiving the microwave power transmitted at dual frequencies. Direct current power is obtained at the end of rectifying antenna or (Rectenna) composed with filter and Schottky diode. Proposed wearable antenna is designed on jeans textile as a substrate and copper foil tap as conducting material. The antenna array has the dual band resonating frequencies which are 4.65 …
Published in Trends in Electrical Engineering · Vol. 8, Issue 1, 2018 · pp. 59–64 Read article
-
Recovery of Mycelial Biomass of Agaricus Bisporus, Pleurotus Ostreatus, Ganoderma lucidum, Hieracium Erinaceus: A comparative Study
Abstract: Mushrooms are the spore-bearing fruiting body of fungi which has a significant potential for numerous applications like pharmaceuticals, textile industry, bioremediation, soil management, alternative to toxic packaging materials and environment sustainability. Mushrooms generally belongs to the class Basidiomycota or Ascomycota. They are typically made of hyphae, the tiniest threads which comprises most fungi. Mycelia are tiny thread like structure which help in making vegetative part of fungus. In this study, …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 14, Issue 2, 2024 · pp. 12–18 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article