Search
74 articles for “sintered”
-
Characterization and Mechanical Behavior of Sintered Al-Mg Powders
Abstract: The resolution of the work is to relate the characterization and mechanical properties for argon atomized Al-1wt%Mg powders through and not through lubricant 1 wt% graphite. Pure nitrogen sintering was accomplished and the effect of sintering atmosphere for the mixed Al-1%Mg powder compacts was examined. One weight percent graphite was premixed with the powder as a lubricant for the first set samples. However, no graphite was used for the second …
Published in Trends in Machine design · Vol. 6, Issue 1, 2019 · pp. 1–7 Read article
-
Exploration of Mechanical Characteristics and Microstructural Analysis of Copper Matrix Composites with Hybrid Reinforcements via Muffle Furnace Sintering
Abstract: Metal Matrix Composites (MMCs) have drawn a lot of interest in the area of innovative materials because of how widely they may be used. Due to their extraordinary qualities, such as high thermal conductivity, higher temperature endurance, improved corrosion resistance, and great weldability, copper matrix composites stand out among them. These qualities make them desirable and promising materials for uses including heat exchangers, automotive parts, and electrical components. In this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 119–126 Read article
-
Effect of Bi2O3 Content and Sintering Temperature on the Frequency-Dependent Magnetic Properties of Nanosized Barium Hexaferrite
Abstract: The magnetic properties of commercially available nanosized barium hexaferrite (BaFe12O19) are studied. The particles were characterized using X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and high-frequency magnetic measurements. The frequency-dependent magnetic properties viz. complex permeability and loss tangent were analyzed within the 10 MHz to 1 GHz range. Variations in complex magnetic permeability and loss tangent were discussed under varying sintering parameters such as temperature and sintering aid content. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 107–113 Read article
-
Adoption of Heat Recovery Technology in Sintering Process to Reduce Carbon Imprint
Abstract: India is the second largest steel producer in the world after China. The 2017 National Steel Policy of India set out the ambitious plan of 250 MT steel production and per capita consumption to around 160 kg by 2030. The dominant iron-making route is blast furnace (BF), which is an energy-intensive process based on fossil fuel consumption. The steel industry contributes around 7% of all greenhouse gas (GHG) emissions. India …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 38–44 Read article
-
Modeling of Sintering Process for the Preparation of Magnetic Abrasives by RSM and ANN Models
Abstract: In this study, a modeling has been done for the prediction of the sintering process, as sintering process is one of the best processes to prepare magnetic abrasives. The sintering process is modelled by using RSM and ANN techniques. The ANN model has been developed using a multilayer feed-forward neural network and trained with the help of an error backpropagation learning algorithm based on the generalized delta rule. The indication …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 3, 2019 · pp. 5–12 Read article
-
Effect of Sintering Temperature on Current-Voltage Characteristics of Nanostructured Manganites
Abstract: Normal 0 false false false EN-IN X-NONE GU MicrosoftInternetExplorer4 In the present communication, nanostructured Y0.95Ca0.05MnO3 manganites using low cost sol-gel method have been synthesized. Samples were sintered at different temperatures in order to change the particle size of the samples. The crystallite size is found to increase with sintering temperature due to crystal agglomeration effect. To understand the transport properties of the presently studied samples, current-voltage (I-V) characteristics have been …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 4, Issue 1, 2014 · pp. 1–5 Read article
-
Deformation and Densification Behaviour of Sintered Aluminium Alloy and Chromium Carbide Metal Matrix Preforms
Abstract: This paper presents comprehensive experimental results focused on the deformation and densification behavior of sintered AA2618 - 2% Cr3C2 metal matrix preforms. The study specifically examines preforms with varying aspect ratios subjected to a cold upsetting process. To create the powder preforms, an initial theoretical density of 89% was achieved using a cylindrical die on a 600 kN hydraulic press. The sintering process was conducted in an electric muffle furnace, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 125–131 Read article
-
Investigation of Dielectric Properties of Lead-Free BaTiO3 Ceramic at Different Sintering Temperatures
Abstract: In the present study, Barium titanate (BaTiO3) was produced using the conventional solid-state sintering technique at three distinct sintering temperatures: 1000, 1100, and 1200°C. It was confirmed by the X-ray diffraction pattern that the perovskite phase was formed without secondary peaks and that the presence of the tetragonal phase was observed near room temperature. Upon conducting a frequency- dependent dielectric study, it was found that ceramic sintered at 1100°C exhibited …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 23–30 Read article
-
Finite Element Simulation of the Cold Open-Die Forging of Sintered Aluminum Metal Powder Trapezoidal Preforms
Abstract: This paper presents finite element simulation of the forging of sintered aluminium metal powder trapezoidal preforms at cold conditions. It involves basic experimental investigations followed by the finite element simulation of the forging process under consideration by the use of DEFORM. The basic experimental work includes the fabrication of compaction die-sets, production of aluminum metal powder trapezoidal preforms and simple compression test to obtain load-deformation data. The stress-strain data was …
Published in Trends in Mechanical Engineering & Technology · Vol. 1, Issue 2-3, 2011 · pp. 18–28 Read article
-
A Study on the Sintering Behavior of Al2O3/Y2O3 Doped ZrO2 Composites
Abstract: AbstractZirconia ceramics are widely used as cutting tools due to their very high hardness, excellent fracture toughness, flexural strength, and wear-resistance properties. Tetragonal zirconia exhibits better mechanical properties due to the transformation toughening of zirconia. The superior mechanical properties in zirconia are mainly due to higher density and controlled microstructure. In the present work, an attempt has been made to prepare near full-dense zirconia bodies with controlled microstructure by optimizing …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 1–8 Read article
-
A Review on Materials and Working Process Parameters of Selective Laser Sintering
Abstract: The potential for additive manufacturing technology to replace some of the current conventional manufacturing methods makes it one of the research and development fields that is expanding quickly. With additive manufacturing, three-dimensional physical models are produced layer by layer from computer-aided design (CAD) models. Fully dense metal things may be produced more rapidly and accurately with additive manufacturing. The Selective Laser Sintering (SLS) procedure uses powder bed fusion, in which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 522–529 Read article
-
STABILIZATION OF HEAVY METAL SLUDGE TO PASS THE TCLP TEST USING CEMENT WITH A SINTER AS A ADDITIVE
Abstract: According to the U.S. Stabilisation is the best-proven technology now in use, according to the Environmental Protection Agency's definition in Title 40, Part 268 of the Code of Federal Regulations (40 CFR 268).This method prevents harmful contaminants from leaking into the environment by physically and chemically trapping them all in a matrix. The investigations used 15 different water-mixed combinations of cement, fly ash, sinter, and lime. The study also examined …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 16–24 Read article
-
Effect of Sintering Temperature on Dielectric Behavior of Y0.95Ca0.05MnO3 Manganites
Abstract: Ca-doped mixed valent Y0.95Ca0.05MnO3 (YCMO) manganites, synthesized using cost effective acetic acid based modified sol-gel method, sintered at various temperatures, exhibit a strong effect of sintering temperature on the structure, microstructure, dielectric and activation energy (Ea). Oxygen vacancies, located at the grain boundaries of the nanostructured YCMO samples, play an important role in governing the dielectric behavior. The peak behavior, observed in imaginary part of dielectric (εʹʹ vs. T) plots, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 3, Issue 2, 2013 · pp. 24–29 Read article
-
An Investigation into the VariablesInfluencing the Densification of Spark Plasma Sintered, 40 Weight Percent Ni-Fe Nano Powder
Abstract: The mechanical alloying process that included high-energy ball milling resulted in particle sizes of 25 mm and 80 mm on average for the Ni-Fe alloy that included 40 percent Ni. At room temperature, highenergy planetary ball milling was carried out over timespan ranging from 15 hours to 60 hours. All of the samples were sintered at the same conditions, which included a temperature of 650 degrees Celsius and a pressure …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 29–35 Read article
-
Behaviour of NINL Blast Furnace with 100% Calibrated Lump Iron Ore
Abstract: A relation between sinter usages in burden and productivity are well established. Now a day, almost all blast furnace usages a sinter in its burden charge. The percentage of sinter in blast furnace is depending upon the availability of fines & sinter machine. But some time, due to non-availability of fine or sinter machines, or both, only calibrated iron ore lump are used as a source of iron in charge …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 28–36 Read article
-
`Lining Pains and Lance Strains-A Case Study to Competing Productivity
Abstract: A relation between sinter usages in burden and productivity are well established. Now a day, almost all blast furnace usages a sinter in its burden charge. The percentage of sinter in blast furnace is depending upon the availability of fines & sinter machine. But some time, due to non–availability of fine or sinter machines, or both, only calibrated iron ore lump are used as a source of iron in charge …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 48–60 Read article
-
Effect of Microwave Energy on Titania Doped YSZ
Abstract: Today, Solid State Oxide Fuel Cells (SOFCs) have become a need of the hour owing to higher efficiency, low emissions and versatile applications. Various materials are being explored to increase its performance and long-term stability, especially at high temperatures. Though YSZ has been the state of art anode material, YZT is emerging as a future material under consideration. Theundoped YSZ and the doped YSZ, i.e. 5 mol% YZT, calcined and …
Published in Research & Reviews : Journal of Physics · Vol. 7, Issue 3, 2018 · pp. 51–55 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Low-Velocity Impact Behaviour of 3d Printing Techniques Using Fiber Reinforcement Polymer Composites: A State of the Art Review
Abstract: Additive manufacturing (AM) is one of the pioneering fields of composite manufacturing, not only in the fabrication of composite all other emerging fields also utilize this technology. Fibers are one of the predominant reinforcing agents which are used to fabricate composite materials for many applications. This review article provides a detailed discussion about the role of 3D printing technology using fiber-reinforced composites in low-velocity applications. 3D printing technology provides very …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 2, 2021 · pp. 1–7 Read article
-
Mechanical Properties of MWCNT Reinforced Aluminium Nano Composites Synthesized Through Powder Metallurgy
Abstract: Multi-wall carbon nanotubes (MWCNTs) reinforced aluminium nano composites were synthesized using powder metallurgy technique and then cold extruded as secondary process. CNTs were added by 0.5wt%, 1wt%, 1.5wt% with aluminium powders and ball milled to obtain homogeneous mixture. The effects of carbon nano tubes (CNTs) on the mechanical properties of Al were investigated. The effect of mixing through ball milling, sintering temperature and extrusion process on the microstructure is explored. …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 2, Issue 1, 2012 · pp. 1–5 Read article